Key takeaways
- Typical cost: $80–$675 per repair, about $260 on average.
- Average repair: about $260
- Typical range: $80–$675
- Spring replacement: $150–$350
- Timeline: Most repairs take 1–2 hours.
- Permits: Repairs need no permit.
Garage Door Repair Cost at a glance
Garage door repair averages about $260, and most repairs cost $80–$675. Broken springs — the most common call — usually cost $150–$350 to replace.
| Repair | Typical cost | Notes |
|---|---|---|
| Average garage door repair | $80–$675 | National average about $260 |
| Spring replacement | $150–$350 | Average about $250; replace both springs together |
| Wood door repairs | $200–$300 | Rot, panel and trim work |
| Fiberglass door repairs | $100–$200 | Cracks and panel fixes |
| Emergency/after-hours service | Adds to base price | Evenings, weekends, holidays |
Prices run lowest in states like Arkansas, Mississippi and Alabama and highest in Hawaii, California and Alaska. See the full breakdown and cost by state →
Garage Door Repair cost questions
- What is the cost of average garage door repair? The typical cost of average garage door repair is $80–$675. National average about $260.
- What is the cost of spring replacement? The typical cost of spring replacement is $150–$350. Average about $250; replace both springs together.
- What is the cost of wood door repairs? The typical cost of wood door repairs is $200–$300. Rot, panel and trim work.
- What is the cost of fiberglass door repairs? The typical cost of fiberglass door repairs is $100–$200. Cracks and panel fixes.
Common garage door problems
| Problem | Likely cause |
|---|---|
| Door won't open, opener hums | Broken spring |
| Door won't close, reverses | Blocked or misaligned safety sensors |
| Door crooked or off track | Broken cable or roller |
| Loud grinding or squeaking | Worn rollers or lack of lubrication |
| Remote doesn't work | Dead battery, lock mode or opener logic board |
| Door falls fast | Weak or broken springs — stop using it |
Safety first
- Never adjust or replace torsion springs yourself — they store enough energy to cause serious injury.
- If a spring breaks, don't use the opener to lift the door; the motor can be damaged and the door can fall.
- Test the auto-reverse monthly: place a 2x4 flat under the door; it should reverse on contact.
- Keep hands and kids away from moving sections and tracks.
Maintenance checklist
- Lubricate springs, hinges and rollers every 6 months with garage door lubricant
- Tighten loose hardware
- Clean and align the photo-eye sensors
- Check cables for fraying
- Replace weatherstripping when cracked
Common garage door repair questions
How much does garage door repair cost?
Most garage door repairs cost about $80–$675. The national average is around $260.
How much does garage door spring replacement cost?
Spring replacement typically costs $150–$350, with about $250 average. Replace both springs together so they wear evenly.
How long do garage door springs last?
Standard torsion springs are rated for about 10,000 cycles, which is roughly 7–10 years at a few openings a day. Higher-cycle springs last longer.
Why won't my garage door close?
The most common cause is misaligned or dirty safety sensors. Obstructions, limit settings and track problems are next.
Is it safe to use a garage door with a broken spring?
No. The door can slam down and the opener can be damaged. Leave it closed and call a technician.
Should I repair or replace my garage door?
Repair springs, cables, rollers and openers. Replace the door when panels are cracked, rusted or badly dented, or when repairs keep stacking up.
How much does a new garage door opener cost?
Installed openers usually cost a few hundred dollars, with quiet belt drives and smart models at the higher end.
How often should a garage door be serviced?
Once a year, plus lubricating the moving parts every 6 months and testing auto-reverse monthly.
Timeline, permits and DIY
How long it takes
Most repairs take 1–2 hours. A new door is usually installed in half a day.
Permits
Repairs need no permit. A new door may need one in high-wind code areas.
DIY or hire a pro?
Lubricating rollers, tightening hardware and testing auto-reverse are DIY jobs. Springs and cables are under high tension, so call a pro.
Questions to ask contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are springs priced individually or as a pair?
- What cycle rating are the replacement springs?
- Is there a trip or diagnostic charge?
- What warranty covers parts and labor?
Maintenance that prevents costly repairs
- Lubricate moving parts every 6 months
- Test the auto-reverse monthly
- Look over cables and springs for wear
Frequently asked questions
Why won't my garage door open?
A broken spring is the most common reason — the opener hums but the door won't lift. Also check the remote battery, the lock button on the wall control and the power.
Why won't my garage door close?
Usually the safety sensors near the floor are blocked, dirty or misaligned. Clean the lenses, align them until both lights are solid, and clear any objects.
Can I replace a garage door spring myself?
Extension springs are sometimes DIY with safety cables, but torsion springs are dangerous and should be replaced by a professional.
How long do garage door springs last?
Standard torsion springs are commonly rated around 10,000 cycles — roughly 7–10 years for most households. High-cycle springs last longer.
How long does a garage door opener last?
Most openers last 10–15 years. Older openers may lack modern safety and security features.
Is it OK to use the garage door with a broken spring?
No. The door becomes extremely heavy and can fall. Leave it closed and call for repair.
How often should a garage door be serviced?
A professional tune-up once a year, plus DIY lubrication and safety tests every few months.
In-depth garage door repair guides
Garage Door Repair by city
Sources: Angi — Garage door repair · Angi — Garage door spring repair. Ranges are rounded estimates; see our editorial policy.