Electrical Panel Upgrade · Calabasas, CA

Electrical Panel Upgrade in Calabasas, CA: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

An electrical panel upgrade in Calabasas typically costs about $1,300–$3,000 nationally, with 100-to-200-amp upgrades in the same range. Adjusted for California prices, plan on roughly $1,600–$3,700.

Key takeaways

  • Typical cost in Calabasas: $1,600–$3,700 (per installed panel); national range $1,300–$3,000.
  • How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
  • Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
  • Best timing: Any season works; schedule with the utility in advance.
  • Before you hire: get at least three written, itemized quotes from licensed, insured California contractors.

How much does electrical panel upgrade cost in Calabasas, CA?

An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. California prices run 22% above the U.S. average, so a typical Calabasas job lands around $1,600–$3,700. Local labor rates, permit fees and your home's specifics move the final number.

ItemTypical costNotes
100-amp panel installed$800–$1,500
150-amp panel installed$1,300–$1,600
200-amp panel / 100→200 amp upgrade$1,300–$3,000
400-amp service$2,000–$4,000
Meter box$200–$800Must match the new service
Subpanel$400–$1,750
Permit$50–$300Electrician usually pulls it

In a smaller community like Calabasas, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Electrical Panel Upgrade cost questions for Calabasas, CA

  • What is the cost of 100-amp panel installed in Calabasas, CA? The typical cost of 100-amp panel installed in Calabasas, CA is $980–$1,800, adjusted for California prices (national $800–$1,500).
  • What is the cost of 150-amp panel installed in Calabasas, CA? The typical cost of 150-amp panel installed in Calabasas, CA is $1,600–$2,000, adjusted for California prices (national $1,300–$1,600).
  • What is the cost of 200-amp panel / 100→200 amp upgrade in Calabasas, CA? The typical cost of 200-amp panel / 100→200 amp upgrade in Calabasas, CA is $1,600–$3,700, adjusted for California prices (national $1,300–$3,000).
  • What is the cost of 400-amp service in Calabasas, CA? The typical cost of 400-amp service in Calabasas, CA is $2,400–$4,900, adjusted for California prices (national $2,000–$4,000).
  • What is the cost of meter box in Calabasas, CA? The typical cost of meter box in Calabasas, CA is $240–$980, adjusted for California prices (national $200–$800). Must match the new service.
  • What is the cost of subpanel in Calabasas, CA? The typical cost of subpanel in Calabasas, CA is $490–$2,100, adjusted for California prices (national $400–$1,750).
  • What is the cost of permit in Calabasas, CA? The typical cost of permit in Calabasas, CA is $60–$370, adjusted for California prices (national $50–$300). Electrician usually pulls it.
  • What is the cost of move the panel in Calabasas, CA? The typical cost of move the panel in Calabasas, CA is $980–$3,700, adjusted for California prices (national $800–$3,000).
  • What is the cost of main breaker replacement in Calabasas, CA? The typical cost of main breaker replacement in Calabasas, CA is $240–$370, adjusted for California prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
  • What is the cost of AFCI/GFCI breakers in Calabasas, CA? The typical cost of AFCI/GFCI breakers in Calabasas, CA is $40–$70 each, adjusted for California prices (national $35–$60 each). Often required by code.

What affects electrical panel upgrade in Calabasas

Calabasas doesn't face an unusual climate hazard for this work, so price and timing mostly come down to your home's size, age and the materials you choose.

Calabasas has a dry climate with hot summers and cold winters. Any season works; schedule with the utility in advance.

Signs you need a panel upgrade

  • Breakers trip often
  • Lights flicker or dim when appliances run
  • You rely on power strips or can't run appliances together
  • The panel buzzes, feels hot or smells burnt
  • Rust or visible damage
  • A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump

Common questions about electrical panel upgrade in Calabasas

How much does an electrical panel upgrade cost in Calabasas, CA?

Most panel upgrades cost about $1,600–$3,700 in Calabasas, CA. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.

Do I need a 200 amp panel?

Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.

Is a Federal Pacific or Zinsco panel dangerous?

Both are widely flagged as outdated, and many electricians recommend replacing them.

How much does a subpanel cost?

A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.

Timeline, permits and DIY in Calabasas

How long it takes

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.

Permits

A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Calabasas building department for local rules.

DIY or hire a pro?

Not a DIY job: a licensed electrician must do the work and coordinate with the utility.

Questions to ask Calabasas contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Did you do a load calculation for my home?
  • Does the quote include the meter, permit and utility coordination?
  • Which breakers will be AFCI or GFCI to meet code?
  • Will the power be off, and for how long?

Maintenance that prevents costly repairs

  • Have the panel inspected if breakers trip often
  • Never ignore buzzing or burning smells
  • Label circuits clearly

How to hire for electrical panel upgrade in Calabasas

  1. Use a licensed, insured electrician.
  2. Ask for a load calculation to size the new service.
  3. Confirm the permit, inspection and utility coordination are included.
  4. Get the warranty for parts and labor in writing.

Electrical Panel Upgrade in Calabasas: FAQs

How much does an electrical panel upgrade cost in Calabasas, CA?

Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.

Do I need a permit for a panel upgrade in Calabasas?

Yes. A licensed electrician typically pulls the permit and coordinates with the utility.

Will I need a panel upgrade to add a heat pump in Calabasas?

Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.

How much does electrical panel upgrade cost in Calabasas compared to the national average?

With California's regional cost index of 1.22, expect roughly $1,600–$3,700 in Calabasas, versus $1,300–$3,000 nationally.

How long does electrical panel upgrade take in Calabasas?

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Calabasas can add a few days.

Do I need a permit for electrical panel upgrade in Calabasas?

A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Calabasas or county building department.

Which Calabasas ZIP codes does this guide cover?

This guide applies to Calabasas ZIP codes 91302, 91303, 91304, 91305, 91306, 91309, 91311, 91313, 91324, 91325, 91326, 91327, 91328, 91329, 91330, 91335, 91337, 91356, 91357, 91364, 91365, 91367, 91371, 91372, 91393 and more, plus the surrounding area.

Electrical Panel Upgrade near Calabasas

Simi Valley, CA
11 mi away · pop. 126,788Thousand Oaks, CA
11 mi away · pop. 129,339Santa Monica, CA
13 mi away · pop. 93,220Hidden Hills, CA
1 mi away · pop. 1,924Topanga, CA
5 mi away · pop. 8,289Agoura, CA
6 mi away · pop. 20,537Oak Park, CA
7 mi away · pop. 13,811Agoura Hills, CA
8 mi away · pop. 20,915Westlake Village, CA
10 mi away · pop. 8,507

Other home services in Calabasas

HVACAC, furnace and heat pump repair, replacement and costs$8,500–$14,600RoofingRoof replacement, leak repair, hail damage and insurance$8,200–$30,500Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$12,200–$85,400Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$8,100–$22,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,500–$6,600Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,500–$46,800Mold RemediationMold removal, testing, costs and insurance$1,800–$6,100Garage Door RepairSprings, cables, openers, off-track doors and costs$100–$820Foundation RepairCracks, settling, piers, slab repair and costs$2,700–$9,600Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$1,100–$2,200Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,700–$6,500Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$770–$5,400Window ReplacementNew window costs by type, frame material and installation method$370–$2,600Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$10,400–$24,400Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$760–$2,000Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$2,100–$3,100

Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general California climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.