Key takeaways
- National range: $1,300–$3,000 per installed panel, about $2,150 on average.
- Cheapest states: Arkansas, Mississippi and Alabama. Most expensive: Hawaii, California and Alaska.
- Biggest price driver: Amperage of the new service.
- Best way to save: Bundle panel work with EV charger or heat pump installs.
How much does electrical panel upgrade cost in 2026?
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
| Move the panel | $800–$3,000 | |
| Main breaker replacement | $200–$300 | $500–$2,000 if the bus bar is damaged |
| AFCI/GFCI breakers | $35–$60 each | Often required by code |
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade Cost questions, answered
- What is the cost of 100-amp panel installed? The typical cost of 100-amp panel installed is $800–$1,500.
- What is the cost of 150-amp panel installed? The typical cost of 150-amp panel installed is $1,300–$1,600.
- What is the cost of 200-amp panel / 100→200 amp upgrade? The typical cost of 200-amp panel / 100→200 amp upgrade is $1,300–$3,000.
- What is the cost of 400-amp service? The typical cost of 400-amp service is $2,000–$4,000.
- What is the cost of meter box? The typical cost of meter box is $200–$800. Must match the new service.
- What is the cost of subpanel? The typical cost of subpanel is $400–$1,750.
- What is the cost of permit? The typical cost of permit is $50–$300. Electrician usually pulls it.
- What is the cost of move the panel? The typical cost of move the panel is $800–$3,000.
- What is the cost of main breaker replacement? The typical cost of main breaker replacement is $200–$300. $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers? The typical cost of AFCI/GFCI breakers is $35–$60 each. Often required by code.
What changes the price
- Amperage of the new service.
- Meter and service drop changes with the utility.
- Panel relocation or code corrections.
- Number of circuits and required AFCI/GFCI breakers.
- Subpanels for garages, additions or EV chargers.
How to save without cutting corners
- Bundle panel work with EV charger or heat pump installs.
- Ask whether a subpanel can solve the problem instead.
- Get a load calculation before paying for 400-amp service.
- Check utility rebates for electrification upgrades.
Electrical Panel Upgrade Cost by state
Labor and material prices vary by region. These estimates apply each state's approximate cost index to the national range.
| State | Estimated range | vs. U.S. average |
|---|---|---|
| Alabama | $1,100–$2,600 | 14% below |
| Alaska | $1,600–$3,700 | 22% above |
| Arizona | $1,200–$2,800 | 7% below |
| Arkansas | $1,100–$2,600 | 15% below |
| California | $1,600–$3,700 | 22% above |
| Colorado | $1,300–$3,000 | about average |
| Connecticut | $1,500–$3,400 | 12% above |
| Delaware | $1,400–$3,100 | 4% above |
| District of Columbia | $1,400–$3,300 | 10% above |
| Florida | $1,200–$2,800 | 8% below |
| Georgia | $1,200–$2,700 | 11% below |
| Hawaii | $1,700–$3,900 | 30% above |
| Idaho | $1,200–$2,800 | 8% below |
| Illinois | $1,400–$3,300 | 10% above |
| Indiana | $1,200–$2,800 | 6% below |
| Iowa | $1,200–$2,800 | 7% below |
| Kansas | $1,200–$2,700 | 10% below |
| Kentucky | $1,200–$2,700 | 10% below |
| Louisiana | $1,100–$2,600 | 13% below |
| Maine | $1,200–$2,900 | 5% below |
| Maryland | $1,300–$3,000 | about average |
| Massachusetts | $1,500–$3,500 | 18% above |
| Michigan | $1,300–$2,900 | 2% below |
| Minnesota | $1,400–$3,200 | 6% above |
| Mississippi | $1,100–$2,600 | 15% below |
| Missouri | $1,300–$2,900 | 3% below |
| Montana | $1,200–$2,800 | 7% below |
| Nebraska | $1,200–$2,700 | 10% below |
| Nevada | $1,300–$3,100 | 3% above |
| New Hampshire | $1,300–$3,000 | about average |
| New Jersey | $1,500–$3,500 | 17% above |
| New Mexico | $1,200–$2,700 | 11% below |
| New York | $1,600–$3,600 | 20% above |
| North Carolina | $1,100–$2,600 | 13% below |
| North Dakota | $1,200–$2,800 | 8% below |
| Ohio | $1,200–$2,900 | 5% below |
| Oklahoma | $1,100–$2,600 | 13% below |
| Oregon | $1,400–$3,200 | 5% above |
| Pennsylvania | $1,400–$3,100 | 4% above |
| Rhode Island | $1,400–$3,300 | 10% above |
| South Carolina | $1,100–$2,600 | 13% below |
| South Dakota | $1,100–$2,600 | 12% below |
| Tennessee | $1,200–$2,700 | 11% below |
| Texas | $1,200–$2,700 | 11% below |
| Utah | $1,200–$2,800 | 7% below |
| Vermont | $1,200–$2,900 | 4% below |
| Virginia | $1,200–$2,800 | 6% below |
| Washington | $1,400–$3,200 | 8% above |
| West Virginia | $1,200–$2,800 | 7% below |
| Wisconsin | $1,300–$3,000 | about average |
| Wyoming | $1,200–$2,700 | 9% below |
Electrical Panel Upgrade Cost FAQs
How much does it cost to upgrade from 100 to 200 amps?
Typically $1,300–$3,000, including the panel and labor.
Does a new meter cost extra?
Often. A meter box rated for the new service typically costs $200–$800.
More questions? See the electrical panel upgrade guide.
Electrical Panel Upgrade Cost in popular cities
New York City, NYLos Angeles, CAChicago, ILHouston, TXPhiladelphia, PAPhoenix, AZSan Antonio, TXSan Diego, CADallas, TXSan Jose, CAAustin, TXJacksonville, FLSan Francisco, CAColumbus, OHFort Worth, TXIndianapolis, INCharlotte, NCSeattle, WADenver, CODetroit, MIBoston, MAMemphis, TNPortland, OROklahoma City, OKLas Vegas, NVBaltimore, MDWashington, D.C., DCMilwaukee, WINashville, TNFresno, CASacramento, CAKansas City, MOAtlanta, GAVirginia Beach, VARaleigh, NCMiami, FL
← Back to the electrical panel upgrade guide
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.