Key takeaways
- Typical cost in Los Angeles: $1,600–$3,700 (per installed panel); national range $1,300–$3,000.
- How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
- Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
- Best timing: Any season works; schedule with the utility in advance.
- Before you hire: get at least three written, itemized quotes from licensed, insured California contractors.
What Los Angeles homeowners should know
Los Angeles has a dry, mild climate, so earthquakes and wildfire shape home projects more than weather does. Much of the housing dates from the 1920s through the 1960s, including raised-foundation homes on cripple walls that are vulnerable in earthquakes.
Hillside neighborhoods in the Santa Monica Mountains and foothills sit in very high fire hazard severity zones. The January 2025 Palisades and Eaton fires destroyed thousands of homes and left smoke and ash damage across a much wider area, making fire restoration and fire-resistant rebuilding major local topics.
How much does electrical panel upgrade cost in Los Angeles, CA?
An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. California prices run 22% above the U.S. average, so a typical Los Angeles job lands around $1,600–$3,700. Local labor rates, permit fees and your home's specifics move the final number.
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
As a large city, Los Angeles has plenty of contractors competing for work, which helps on price, but busy seasons can mean longer waits. Book early after major storms.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade cost questions for Los Angeles, CA
- What is the cost of 100-amp panel installed in Los Angeles, CA? The typical cost of 100-amp panel installed in Los Angeles, CA is $980–$1,800, adjusted for California prices (national $800–$1,500).
- What is the cost of 150-amp panel installed in Los Angeles, CA? The typical cost of 150-amp panel installed in Los Angeles, CA is $1,600–$2,000, adjusted for California prices (national $1,300–$1,600).
- What is the cost of 200-amp panel / 100→200 amp upgrade in Los Angeles, CA? The typical cost of 200-amp panel / 100→200 amp upgrade in Los Angeles, CA is $1,600–$3,700, adjusted for California prices (national $1,300–$3,000).
- What is the cost of 400-amp service in Los Angeles, CA? The typical cost of 400-amp service in Los Angeles, CA is $2,400–$4,900, adjusted for California prices (national $2,000–$4,000).
- What is the cost of meter box in Los Angeles, CA? The typical cost of meter box in Los Angeles, CA is $240–$980, adjusted for California prices (national $200–$800). Must match the new service.
- What is the cost of subpanel in Los Angeles, CA? The typical cost of subpanel in Los Angeles, CA is $490–$2,100, adjusted for California prices (national $400–$1,750).
- What is the cost of permit in Los Angeles, CA? The typical cost of permit in Los Angeles, CA is $60–$370, adjusted for California prices (national $50–$300). Electrician usually pulls it.
- What is the cost of move the panel in Los Angeles, CA? The typical cost of move the panel in Los Angeles, CA is $980–$3,700, adjusted for California prices (national $800–$3,000).
- What is the cost of main breaker replacement in Los Angeles, CA? The typical cost of main breaker replacement in Los Angeles, CA is $240–$370, adjusted for California prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers in Los Angeles, CA? The typical cost of AFCI/GFCI breakers in Los Angeles, CA is $40–$70 each, adjusted for California prices (national $35–$60 each). Often required by code.
What affects electrical panel upgrade in Los Angeles
Los Angeles doesn't face an unusual climate hazard for this work, so price and timing mostly come down to your home's size, age and the materials you choose.
Los Angeles has a dry climate with hot summers and cold winters. Any season works; schedule with the utility in advance.
Signs you need a panel upgrade
- Breakers trip often
- Lights flicker or dim when appliances run
- You rely on power strips or can't run appliances together
- The panel buzzes, feels hot or smells burnt
- Rust or visible damage
- A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump
Common questions about electrical panel upgrade in Los Angeles
How much does an electrical panel upgrade cost in Los Angeles, CA?
Most panel upgrades cost about $1,600–$3,700 in Los Angeles, CA. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.
Do I need a 200 amp panel?
Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.
Is a Federal Pacific or Zinsco panel dangerous?
Both are widely flagged as outdated, and many electricians recommend replacing them.
How much does a subpanel cost?
A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.
Timeline, permits and DIY in Los Angeles
How long it takes
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
Permits
A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Los Angeles building department for local rules.
DIY or hire a pro?
Not a DIY job: a licensed electrician must do the work and coordinate with the utility.
Questions to ask Los Angeles contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Did you do a load calculation for my home?
- Does the quote include the meter, permit and utility coordination?
- Which breakers will be AFCI or GFCI to meet code?
- Will the power be off, and for how long?
Maintenance that prevents costly repairs
- Have the panel inspected if breakers trip often
- Never ignore buzzing or burning smells
- Label circuits clearly
How to hire for electrical panel upgrade in Los Angeles
- Use a licensed, insured electrician.
- Ask for a load calculation to size the new service.
- Confirm the permit, inspection and utility coordination are included.
- Get the warranty for parts and labor in writing.
Electrical Panel Upgrade in Los Angeles: FAQs
How much does an electrical panel upgrade cost in Los Angeles, CA?
Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.
Do I need a permit for a panel upgrade in Los Angeles?
Yes. A licensed electrician typically pulls the permit and coordinates with the utility.
Will I need a panel upgrade to add a heat pump in Los Angeles?
Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.
How much does electrical panel upgrade cost in Los Angeles compared to the national average?
With California's regional cost index of 1.22, expect roughly $1,600–$3,700 in Los Angeles, versus $1,300–$3,000 nationally.
How long does electrical panel upgrade take in Los Angeles?
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Los Angeles can add a few days.
Do I need a permit for electrical panel upgrade in Los Angeles?
A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Los Angeles or county building department.
Which Los Angeles ZIP codes does this guide cover?
This guide applies to Los Angeles ZIP codes 90001, 90002, 90003, 90004, 90005, 90006, 90007, 90008, 90009, 90010, 90011, 90012, 90013, 90014, 90015, 90016, 90017, 90018, 90019, 90020, 90021, 90022, 90023, 90024, 90025 and more, plus the surrounding area.
Electrical Panel Upgrade near Los Angeles
5 mi away · pop. 126,496Huntington Park, CA
5 mi away · pop. 59,430Florence-Graham, CA
6 mi away · pop. 63,387Glendale, CA
6 mi away · pop. 201,020Monterey Park, CA
7 mi away · pop. 61,468Maywood, CA
6 mi away · pop. 27,888Walnut Park, CA
6 mi away · pop. 15,966Commerce, CA
6 mi away · pop. 13,081Bell, CA
6 mi away · pop. 36,205
Other home services in Los Angeles
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general California climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.