Electrical Panel Upgrade · Jacksonville, FL

Electrical Panel Upgrade in Jacksonville, FL: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

An electrical panel upgrade in Jacksonville typically costs about $1,300–$3,000 nationally, with 100-to-200-amp upgrades in the same range. Adjusted for Florida prices, plan on roughly $1,200–$2,800. In Jacksonville, the biggest local factors are flooding, high humidity and long, hot cooling season.

Key takeaways

  • Typical cost in Jacksonville: $1,200–$2,800 (per installed panel); national range $1,300–$3,000.
  • Biggest local factors: flooding, high humidity and long, hot cooling season.
  • How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
  • Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
  • Best timing: Upgrade before summer, when AC loads are highest.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Florida contractors.

What Jacksonville homeowners should know

Jacksonville covers more land than any other city in the continental U.S., with coastal, riverfront and inland neighborhoods. Hurricanes and nor'easters bring wind and surge risk, and Hurricane Irma caused record flooding along the St. Johns River in 2017.

Hot, humid summers keep AC running and mold risk high, and sandy soils with a high water table affect drainage.

How much does electrical panel upgrade cost in Jacksonville, FL?

An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Florida prices run 8% below the U.S. average, so a typical Jacksonville job lands around $1,200–$2,800. Local labor rates, permit fees and your home's specifics move the final number.

ItemTypical costNotes
100-amp panel installed$800–$1,500
150-amp panel installed$1,300–$1,600
200-amp panel / 100→200 amp upgrade$1,300–$3,000
400-amp service$2,000–$4,000
Meter box$200–$800Must match the new service
Subpanel$400–$1,750
Permit$50–$300Electrician usually pulls it

As a large city, Jacksonville has plenty of contractors competing for work, which helps on price, but busy seasons can mean longer waits. Book early after major storms.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Electrical Panel Upgrade cost questions for Jacksonville, FL

  • What is the cost of 100-amp panel installed in Jacksonville, FL? The typical cost of 100-amp panel installed in Jacksonville, FL is $740–$1,400, adjusted for Florida prices (national $800–$1,500).
  • What is the cost of 150-amp panel installed in Jacksonville, FL? The typical cost of 150-amp panel installed in Jacksonville, FL is $1,200–$1,500, adjusted for Florida prices (national $1,300–$1,600).
  • What is the cost of 200-amp panel / 100→200 amp upgrade in Jacksonville, FL? The typical cost of 200-amp panel / 100→200 amp upgrade in Jacksonville, FL is $1,200–$2,800, adjusted for Florida prices (national $1,300–$3,000).
  • What is the cost of 400-amp service in Jacksonville, FL? The typical cost of 400-amp service in Jacksonville, FL is $1,800–$3,700, adjusted for Florida prices (national $2,000–$4,000).
  • What is the cost of meter box in Jacksonville, FL? The typical cost of meter box in Jacksonville, FL is $180–$740, adjusted for Florida prices (national $200–$800). Must match the new service.
  • What is the cost of subpanel in Jacksonville, FL? The typical cost of subpanel in Jacksonville, FL is $370–$1,600, adjusted for Florida prices (national $400–$1,750).
  • What is the cost of permit in Jacksonville, FL? The typical cost of permit in Jacksonville, FL is $50–$280, adjusted for Florida prices (national $50–$300). Electrician usually pulls it.
  • What is the cost of move the panel in Jacksonville, FL? The typical cost of move the panel in Jacksonville, FL is $740–$2,800, adjusted for Florida prices (national $800–$3,000).
  • What is the cost of main breaker replacement in Jacksonville, FL? The typical cost of main breaker replacement in Jacksonville, FL is $180–$280, adjusted for Florida prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
  • What is the cost of AFCI/GFCI breakers in Jacksonville, FL? The typical cost of AFCI/GFCI breakers in Jacksonville, FL is $30–$60 each, adjusted for Florida prices (national $35–$60 each). Often required by code.

What affects electrical panel upgrade in Jacksonville

FloodingPanels that have been underwater in Jacksonville floods must be replaced, not dried out.
High humidityHumid air around Jacksonville can corrode panels; rust is a common upgrade sign.
Long, hot cooling seasonLong cooling seasons around Jacksonville push AC and heat pump loads, a common reason older homes move to 200-amp service.

Jacksonville has hot, humid summers and mild winters. Upgrade before summer, when AC loads are highest.

Signs you need a panel upgrade

  • Breakers trip often
  • Lights flicker or dim when appliances run
  • You rely on power strips or can't run appliances together
  • The panel buzzes, feels hot or smells burnt
  • Rust or visible damage
  • A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump

Common questions about electrical panel upgrade in Jacksonville

How much does an electrical panel upgrade cost in Jacksonville, FL?

Most panel upgrades cost about $1,200–$2,800 in Jacksonville, FL. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.

Do I need a 200 amp panel?

Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.

Is a Federal Pacific or Zinsco panel dangerous?

Both are widely flagged as outdated, and many electricians recommend replacing them.

How much does a subpanel cost?

A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.

Timeline, permits and DIY in Jacksonville

How long it takes

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.

Permits

A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Jacksonville building department for local rules.

DIY or hire a pro?

Not a DIY job: a licensed electrician must do the work and coordinate with the utility.

Questions to ask Jacksonville contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Did you do a load calculation for my home?
  • Does the quote include the meter, permit and utility coordination?
  • Which breakers will be AFCI or GFCI to meet code?
  • Will the power be off, and for how long?

Maintenance that prevents costly repairs

  • Have the panel inspected if breakers trip often
  • Never ignore buzzing or burning smells
  • Label circuits clearly

How to hire for electrical panel upgrade in Jacksonville

  1. Use a licensed, insured electrician.
  2. Ask for a load calculation to size the new service.
  3. Confirm the permit, inspection and utility coordination are included.
  4. Get the warranty for parts and labor in writing.

Electrical Panel Upgrade in Jacksonville: FAQs

How much does an electrical panel upgrade cost in Jacksonville, FL?

Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.

Do I need a permit for a panel upgrade in Jacksonville?

Yes. A licensed electrician typically pulls the permit and coordinates with the utility.

Will I need a panel upgrade to add a heat pump in Jacksonville?

Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.

How much does electrical panel upgrade cost in Jacksonville compared to the national average?

With Florida's regional cost index of 0.92, expect roughly $1,200–$2,800 in Jacksonville, versus $1,300–$3,000 nationally.

How long does electrical panel upgrade take in Jacksonville?

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Jacksonville can add a few days.

Do I need a permit for electrical panel upgrade in Jacksonville?

A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Jacksonville or county building department.

Which Jacksonville ZIP codes does this guide cover?

This guide applies to Jacksonville ZIP codes 32099, 32201, 32202, 32203, 32204, 32205, 32206, 32207, 32208, 32209, 32210, 32211, 32212, 32214, 32215, 32216, 32217, 32218, 32219, 32220, 32221, 32222, 32223, 32224, 32225 and more, plus the surrounding area.

Electrical Panel Upgrade near Jacksonville

Bellair-Meadowbrook Terrace, FL
12 mi away · pop. 13,343Orange Park, FL
12 mi away · pop. 8,702Fruit Cove, FL
15 mi away · pop. 29,362Atlantic Beach, FL
15 mi away · pop. 13,193Nassau Village-Ratliff, FL
15 mi away · pop. 5,337Oakleaf Plantation, FL
15 mi away · pop. 20,315Lakeside, FL
16 mi away · pop. 30,943Neptune Beach, FL
16 mi away · pop. 7,269Jacksonville Beach, FL
16 mi away · pop. 23,064

Other home services in Jacksonville

HVACAC, furnace and heat pump repair, replacement and costs$6,400–$11,000RoofingRoof replacement, leak repair, hail damage and insurance$6,200–$23,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$9,200–$64,400Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,100–$16,600Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,200–$4,900Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,700–$35,300Mold RemediationMold removal, testing, costs and insurance$1,400–$4,600Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$620Foundation RepairCracks, settling, piers, slab repair and costs$2,000–$7,200Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$810–$1,700Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,300–$4,900Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$580–$4,000Window ReplacementNew window costs by type, frame material and installation method$280–$1,900Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,800–$18,400Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$570–$1,500Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,600–$2,300

Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Florida climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.