Siding Replacement · Jacksonville, FL

Siding Replacement in Jacksonville, FL: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Siding replacement in Jacksonville typically costs about $8,500–$20,000 for a 2,000 sq ft home nationally, or roughly $3–$15 per sq ft installed. Adjusted for Florida prices, plan on roughly $7,800–$18,400. In Jacksonville, the biggest local factors are severe storms & high wind, high humidity and wildfire.

Key takeaways

  • Typical cost in Jacksonville: $7,800–$18,400 (for a 2,000 sq ft home); national range $8,500–$20,000.
  • Biggest local factors: severe storms & high wind, high humidity and wildfire.
  • How long it takes: Installation time depends on home size and material; finalize quotes about 3 months ahead.
  • Permits: Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections.
  • Best timing: Schedule in fall or spring to avoid extreme heat during installation.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Florida contractors.

What Jacksonville homeowners should know

Jacksonville covers more land than any other city in the continental U.S., with coastal, riverfront and inland neighborhoods. Hurricanes and nor'easters bring wind and surge risk, and Hurricane Irma caused record flooding along the St. Johns River in 2017.

Hot, humid summers keep AC running and mold risk high, and sandy soils with a high water table affect drainage.

How much does siding replacement cost in Jacksonville, FL?

Siding replacement for a typical 2,000 sq ft home costs $8,500–$20,000, with an average around $14,500. Material choice is the biggest price driver. Florida prices run 8% below the U.S. average, so a typical Jacksonville job lands around $7,800–$18,400. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical cost (per sq ft installed)Notes
Vinyl$3–$12Most common
Fiber cement$5–$14Durable, fire resistant
Engineered wood$2–$10
Wood$2–$15Needs regular repainting or stain
Steel$4–$16
Aluminum$3–$10
Stucco$7–$17

As a large city, Jacksonville has plenty of contractors competing for work, which helps on price, but busy seasons can mean longer waits. Book early after major storms.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Siding Replacement cost questions for Jacksonville, FL

  • What is the cost of vinyl in Jacksonville, FL? The typical cost of vinyl in Jacksonville, FL is $0–$10 (typical cost per sq ft installed), adjusted for Florida prices (national $3–$12). Most common.
  • What is the cost of fiber cement in Jacksonville, FL? The typical cost of fiber cement in Jacksonville, FL is $0–$10 (typical cost per sq ft installed), adjusted for Florida prices (national $5–$14). Durable, fire resistant.
  • What is the cost of engineered wood in Jacksonville, FL? The typical cost of engineered wood in Jacksonville, FL is $0–$10 (typical cost per sq ft installed), adjusted for Florida prices (national $2–$10).
  • What is the cost of wood in Jacksonville, FL? The typical cost of wood in Jacksonville, FL is $0–$10 (typical cost per sq ft installed), adjusted for Florida prices (national $2–$15). Needs regular repainting or stain.
  • What is the cost of steel in Jacksonville, FL? The typical cost of steel in Jacksonville, FL is $0–$10 (typical cost per sq ft installed), adjusted for Florida prices (national $4–$16).
  • What is the cost of aluminum in Jacksonville, FL? The typical cost of aluminum in Jacksonville, FL is $0–$10 (typical cost per sq ft installed), adjusted for Florida prices (national $3–$10).
  • What is the cost of stucco in Jacksonville, FL? The typical cost of stucco in Jacksonville, FL is $10–$20 (typical cost per sq ft installed), adjusted for Florida prices (national $7–$17).
  • What is the cost of brick veneer in Jacksonville, FL? The typical cost of brick veneer in Jacksonville, FL is $10–$20 (typical cost per sq ft installed), adjusted for Florida prices (national $8–$21).
  • What is the cost of stone veneer in Jacksonville, FL? The typical cost of stone veneer in Jacksonville, FL is $0–$10 (typical cost per sq ft installed), adjusted for Florida prices (national $5–$11).
  • What is the cost of labor in Jacksonville, FL? The typical cost of labor in Jacksonville, FL is $0–$0 per sq ft (typical cost per sq ft installed), adjusted for Florida prices (national $1–$4 per sq ft). $1,800–$8,000 for an average home.

What affects siding replacement in Jacksonville

Severe storms & high windHigh winds around Jacksonville can tear panels off and expose the wall underneath.
High humidityHumidity around Jacksonville can rot wood and engineered wood siding without regular upkeep.
WildfireIn wildfire-prone areas near Jacksonville, noncombustible siding like fiber cement, stucco or brick reduces risk.

Jacksonville has hot, humid summers and mild winters. Schedule in fall or spring to avoid extreme heat during installation.

Signs you need new siding

  • Damage spread across large areas
  • Repair costs approaching half the cost of replacement
  • Rot or moisture problems behind panels
  • Cracked, warped or missing panels
  • New indoor drafts
  • Fresh water stains on interior walls

Common questions about siding replacement in Jacksonville

How much does siding replacement cost in Jacksonville, FL?

Residing a typical 2,000 sq ft home costs about $7,800–$18,400 in Jacksonville, FL, or roughly $3–$15 per square foot installed.

How much does siding cost per square foot?

Installed prices run about $3–$12 for vinyl, $5–$14 for fiber cement, $2–$10 for engineered wood and $7–$17 for stucco.

Fiber cement or vinyl siding?

Fiber cement costs more but lasts 30–50 years versus 20–40 for vinyl, and it resists fire better.

How much does it cost to remove old siding?

Removing old siding typically costs $1,000–$2,500.

Timeline, permits and DIY in Jacksonville

How long it takes

Installation time depends on home size and material; finalize quotes about 3 months ahead.

Permits

Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Check with the Jacksonville building department for local rules.

DIY or hire a pro?

Hire a pro: installation errors can trap moisture and void warranties.

Questions to ask Jacksonville contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Does the quote include tear-off, house wrap and trim?
  • Are you certified by the siding manufacturer?
  • How will you handle rot found under old siding?
  • What workmanship warranty do you offer?

Maintenance that prevents costly repairs

  • Wash siding once a year
  • Recaulk gaps around windows and trim
  • Repaint or restain wood siding on schedule

How to hire for siding replacement in Jacksonville

  1. Get three itemized quotes covering material, trim, wrap and removal.
  2. Ask whether the installer is certified by the siding manufacturer.
  3. Confirm permit and inspection costs are included.
  4. Get workmanship and product warranties in writing.

Siding Replacement in Jacksonville: FAQs

How much does siding replacement cost in Jacksonville, FL?

Nationally, residing a 2,000 sq ft home costs about $8,500–$20,000. Material and local labor rates set the final price.

Does homeowners insurance cover siding damage in Jacksonville?

Sudden storm or hail damage is often covered, minus your deductible; wear and age aren't.

How much does siding replacement cost in Jacksonville compared to the national average?

With Florida's regional cost index of 0.92, expect roughly $7,800–$18,400 in Jacksonville, versus $8,500–$20,000 nationally.

How long does siding replacement take in Jacksonville?

Installation time depends on home size and material; finalize quotes about 3 months ahead. Permit and inspection scheduling in Jacksonville can add a few days.

Do I need a permit for siding replacement in Jacksonville?

Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Confirm with the Jacksonville or county building department.

Which Jacksonville ZIP codes does this guide cover?

This guide applies to Jacksonville ZIP codes 32099, 32201, 32202, 32203, 32204, 32205, 32206, 32207, 32208, 32209, 32210, 32211, 32212, 32214, 32215, 32216, 32217, 32218, 32219, 32220, 32221, 32222, 32223, 32224, 32225 and more, plus the surrounding area.

Siding Replacement near Jacksonville

Bellair-Meadowbrook Terrace, FL
12 mi away · pop. 13,343Orange Park, FL
12 mi away · pop. 8,702Fruit Cove, FL
15 mi away · pop. 29,362Atlantic Beach, FL
15 mi away · pop. 13,193Nassau Village-Ratliff, FL
15 mi away · pop. 5,337Oakleaf Plantation, FL
15 mi away · pop. 20,315Lakeside, FL
16 mi away · pop. 30,943Neptune Beach, FL
16 mi away · pop. 7,269Jacksonville Beach, FL
16 mi away · pop. 23,064

Other home services in Jacksonville

HVACAC, furnace and heat pump repair, replacement and costs$6,400–$11,000RoofingRoof replacement, leak repair, hail damage and insurance$6,200–$23,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$9,200–$64,400Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,100–$16,600Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,200–$4,900Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,700–$35,300Mold RemediationMold removal, testing, costs and insurance$1,400–$4,600Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$620Foundation RepairCracks, settling, piers, slab repair and costs$2,000–$7,200Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$810–$1,700Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,300–$4,900Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$580–$4,000Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,200–$2,800Window ReplacementNew window costs by type, frame material and installation method$280–$1,900Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$570–$1,500Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,600–$2,300

Sources: Fixr — House siding cost · Angi — What is siding · Angi — Siding installation and repair. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Florida climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.