Electrical Panel Upgrade · Broomfield, CO

Electrical Panel Upgrade in Broomfield, CO: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

An electrical panel upgrade in Broomfield typically costs about $1,300–$3,000 nationally, with 100-to-200-amp upgrades in the same range. Adjusted for Colorado prices, plan on roughly $1,300–$3,000. In Broomfield, the biggest local factors are long heating season.

Key takeaways

  • Typical cost in Broomfield: $1,300–$3,000 (per installed panel); national range $1,300–$3,000.
  • Biggest local factors: long heating season.
  • How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
  • Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
  • Best timing: Upgrade before adding electric heat or a heat pump for winter.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Colorado contractors.

How much does electrical panel upgrade cost in Broomfield, CO?

An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Colorado prices run at the U.S. average, so a typical Broomfield job lands around $1,300–$3,000. Local labor rates, permit fees and your home's specifics move the final number.

ItemTypical costNotes
100-amp panel installed$800–$1,500
150-amp panel installed$1,300–$1,600
200-amp panel / 100→200 amp upgrade$1,300–$3,000
400-amp service$2,000–$4,000
Meter box$200–$800Must match the new service
Subpanel$400–$1,750
Permit$50–$300Electrician usually pulls it

Broomfield is big enough to have a solid pool of local contractors, and many regional companies also serve the area, so getting three quotes is easy.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Electrical Panel Upgrade cost questions for Broomfield, CO

  • What is the cost of 100-amp panel installed in Broomfield, CO? The typical cost of 100-amp panel installed in Broomfield, CO is $800–$1,500.
  • What is the cost of 150-amp panel installed in Broomfield, CO? The typical cost of 150-amp panel installed in Broomfield, CO is $1,300–$1,600.
  • What is the cost of 200-amp panel / 100→200 amp upgrade in Broomfield, CO? The typical cost of 200-amp panel / 100→200 amp upgrade in Broomfield, CO is $1,300–$3,000.
  • What is the cost of 400-amp service in Broomfield, CO? The typical cost of 400-amp service in Broomfield, CO is $2,000–$4,000.
  • What is the cost of meter box in Broomfield, CO? The typical cost of meter box in Broomfield, CO is $200–$800. Must match the new service.
  • What is the cost of subpanel in Broomfield, CO? The typical cost of subpanel in Broomfield, CO is $400–$1,750.
  • What is the cost of permit in Broomfield, CO? The typical cost of permit in Broomfield, CO is $50–$300. Electrician usually pulls it.
  • What is the cost of move the panel in Broomfield, CO? The typical cost of move the panel in Broomfield, CO is $800–$3,000.
  • What is the cost of main breaker replacement in Broomfield, CO? The typical cost of main breaker replacement in Broomfield, CO is $200–$300. $500–$2,000 if the bus bar is damaged.
  • What is the cost of AFCI/GFCI breakers in Broomfield, CO? The typical cost of AFCI/GFCI breakers in Broomfield, CO is $35–$60 each. Often required by code.

What affects electrical panel upgrade in Broomfield

Long heating seasonElectric heat and heat pump retrofits in Broomfield often require more electrical capacity.

Broomfield has cold, snowy winters and warm summers. Upgrade before adding electric heat or a heat pump for winter.

Signs you need a panel upgrade

  • Breakers trip often
  • Lights flicker or dim when appliances run
  • You rely on power strips or can't run appliances together
  • The panel buzzes, feels hot or smells burnt
  • Rust or visible damage
  • A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump

Common questions about electrical panel upgrade in Broomfield

How much does an electrical panel upgrade cost in Broomfield, CO?

Most panel upgrades cost about $1,300–$3,000 in Broomfield, CO. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.

Do I need a 200 amp panel?

Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.

Is a Federal Pacific or Zinsco panel dangerous?

Both are widely flagged as outdated, and many electricians recommend replacing them.

How much does a subpanel cost?

A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.

Timeline, permits and DIY in Broomfield

How long it takes

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.

Permits

A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Broomfield building department for local rules.

DIY or hire a pro?

Not a DIY job: a licensed electrician must do the work and coordinate with the utility.

Questions to ask Broomfield contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Did you do a load calculation for my home?
  • Does the quote include the meter, permit and utility coordination?
  • Which breakers will be AFCI or GFCI to meet code?
  • Will the power be off, and for how long?

Maintenance that prevents costly repairs

  • Have the panel inspected if breakers trip often
  • Never ignore buzzing or burning smells
  • Label circuits clearly

How to hire for electrical panel upgrade in Broomfield

  1. Use a licensed, insured electrician.
  2. Ask for a load calculation to size the new service.
  3. Confirm the permit, inspection and utility coordination are included.
  4. Get the warranty for parts and labor in writing.

Electrical Panel Upgrade in Broomfield: FAQs

How much does an electrical panel upgrade cost in Broomfield, CO?

Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.

Do I need a permit for a panel upgrade in Broomfield?

Yes. A licensed electrician typically pulls the permit and coordinates with the utility.

Will I need a panel upgrade to add a heat pump in Broomfield?

Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.

How much does electrical panel upgrade cost in Broomfield compared to the national average?

With Colorado's regional cost index of 1.00, expect roughly $1,300–$3,000 in Broomfield, versus $1,300–$3,000 nationally.

How long does electrical panel upgrade take in Broomfield?

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Broomfield can add a few days.

Do I need a permit for electrical panel upgrade in Broomfield?

A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Broomfield or county building department.

Which Broomfield ZIP codes does this guide cover?

This guide applies to Broomfield ZIP codes 80020, 80021, 80023, 80038, plus the surrounding area.

Electrical Panel Upgrade near Broomfield

Westminster, CO
6 mi away · pop. 113,130Thornton, CO
7 mi away · pop. 133,451Arvada, CO
8 mi away · pop. 115,368Louisville, CO
5 mi away · pop. 20,396Superior, CO
5 mi away · pop. 12,980Lafayette, CO
5 mi away · pop. 27,729Northglenn, CO
6 mi away · pop. 39,197Federal Heights, CO
7 mi away · pop. 12,381Sherrelwood, CO
7 mi away · pop. 18,287

Other home services in Broomfield

HVACAC, furnace and heat pump repair, replacement and costs$7,000–$12,000RoofingRoof replacement, leak repair, hail damage and insurance$6,700–$25,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,000–$70,000Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,600–$18,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,400Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,900–$38,300Mold RemediationMold removal, testing, costs and insurance$1,500–$5,000Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$680Foundation RepairCracks, settling, piers, slab repair and costs$2,200–$7,800Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$880–$1,800Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,400–$5,300Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$630–$4,400Window ReplacementNew window costs by type, frame material and installation method$300–$2,100Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$8,500–$20,000Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$620–$1,700Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,700–$2,500

Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Colorado climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.