Key takeaways
- Typical cost in Colorado Springs: $620–$1,700 (per installation); national range $622–$1,677.
- Biggest local factors: snow & ice, hail and hard freezes.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Install before winter so gutters handle snowmelt and ice.
- Before you hire: get at least three written, itemized quotes from licensed, insured Colorado contractors.
How much does gutter installation cost in Colorado Springs, CO?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Colorado prices run at the U.S. average, so a typical Colorado Springs job lands around $620–$1,700. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
As a large city, Colorado Springs has plenty of contractors competing for work, which helps on price, but busy seasons can mean longer waits. Book early after major storms.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Colorado Springs, CO
- What is the cost of vinyl in Colorado Springs, CO? The typical cost of vinyl in Colorado Springs, CO is $3–$6 per linear foot.
- What is the cost of aluminum in Colorado Springs, CO? The typical cost of aluminum in Colorado Springs, CO is $4–$14 per linear foot. Dents easily.
- What is the cost of galvanized steel in Colorado Springs, CO? The typical cost of galvanized steel in Colorado Springs, CO is $6–$14 per linear foot.
- What is the cost of stainless steel in Colorado Springs, CO? The typical cost of stainless steel in Colorado Springs, CO is $9–$20 per linear foot.
- What is the cost of zinc in Colorado Springs, CO? The typical cost of zinc in Colorado Springs, CO is $10–$29 per linear foot.
- What is the cost of copper in Colorado Springs, CO? The typical cost of copper in Colorado Springs, CO is $25–$40+ per linear foot. Up to 50 years.
- What is the cost of seamless gutter system in Colorado Springs, CO? The typical cost of seamless gutter system in Colorado Springs, CO is $800–$5,000 total. Cut on site.
- What is the cost of downspouts in Colorado Springs, CO? The typical cost of downspouts in Colorado Springs, CO is $5–$12 per foot. Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Colorado Springs, CO? The typical cost of gutter guards in Colorado Springs, CO is $7–$12 per linear foot. Installed.
- What is the cost of old gutter removal in Colorado Springs, CO? The typical cost of old gutter removal in Colorado Springs, CO is $0.65–$0.85 per linear foot. Extra stories add $1–$3/ft labor.
What affects gutter installation in Colorado Springs
Colorado Springs has cold, snowy winters and warm summers. Install before winter so gutters handle snowmelt and ice.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Colorado Springs
How much does gutter installation cost in Colorado Springs, CO?
Most gutter installations cost about $620–$1,700 in Colorado Springs, CO, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Colorado Springs
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Colorado Springs building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Colorado Springs contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Colorado Springs
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Colorado Springs: FAQs
How much do new gutters cost in Colorado Springs, CO?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Colorado Springs?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
What gutters work best in snowy areas?
Heavier-gauge metal gutters with strong hangers handle snow and ice best.
How much does gutter installation cost in Colorado Springs compared to the national average?
With Colorado's regional cost index of 1.00, expect roughly $620–$1,700 in Colorado Springs, versus $622–$1,677 nationally.
How long does gutter installation take in Colorado Springs?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Colorado Springs can add a few days.
Do I need a permit for gutter installation in Colorado Springs?
Some areas require a permit for gutter installation; check locally. Confirm with the Colorado Springs or county building department.
Which Colorado Springs ZIP codes does this guide cover?
This guide applies to Colorado Springs ZIP codes 80901, 80902, 80903, 80904, 80905, 80906, 80907, 80908, 80909, 80910, 80911, 80912, 80913, 80914, 80915, 80916, 80917, 80918, 80919, 80920, 80921, 80922, 80923, 80924, 80925 and more, plus the surrounding area.
Gutter Installation near Colorado Springs
5 mi away · pop. 6,900Manitou Springs, CO
5 mi away · pop. 5,334Fort Carson, CO
7 mi away · pop. 13,813Security-Widefield, CO
8 mi away · pop. 32,882Air Force Academy, CO
11 mi away · pop. 6,680Fountain, CO
12 mi away · pop. 27,767Cascade-Chipita Park, CO
12 mi away · pop. 1,655Black Forest, CO
14 mi away · pop. 13,116Gleneagle, CO
15 mi away · pop. 6,611
Other home services in Colorado Springs
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Colorado climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.