Key takeaways
- Typical cost in Felton: $650–$1,700 (per installation); national range $622–$1,677.
- Biggest local factors: hard freezes and severe storms & high wind.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Late summer and early fall are ideal, before leaves drop.
- Before you hire: get at least three written, itemized quotes from licensed, insured Delaware contractors.
How much does gutter installation cost in Felton, DE?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Delaware prices run 4% above the U.S. average, so a typical Felton job lands around $650–$1,700. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
In a smaller community like Felton, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Felton, DE
- What is the cost of vinyl in Felton, DE? The typical cost of vinyl in Felton, DE is $0–$10 per linear foot, adjusted for Delaware prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Felton, DE? The typical cost of aluminum in Felton, DE is $0–$10 per linear foot, adjusted for Delaware prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Felton, DE? The typical cost of galvanized steel in Felton, DE is $10–$10 per linear foot, adjusted for Delaware prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Felton, DE? The typical cost of stainless steel in Felton, DE is $10–$20 per linear foot, adjusted for Delaware prices (national $9–$20 per linear foot).
- What is the cost of zinc in Felton, DE? The typical cost of zinc in Felton, DE is $10–$30 per linear foot, adjusted for Delaware prices (national $10–$29 per linear foot).
- What is the cost of copper in Felton, DE? The typical cost of copper in Felton, DE is $30–$40+ per linear foot, adjusted for Delaware prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Felton, DE? The typical cost of seamless gutter system in Felton, DE is $830–$5,200 total, adjusted for Delaware prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Felton, DE? The typical cost of downspouts in Felton, DE is $10–$10 per foot, adjusted for Delaware prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Felton, DE? The typical cost of gutter guards in Felton, DE is $10–$10 per linear foot, adjusted for Delaware prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Felton, DE? The typical cost of old gutter removal in Felton, DE is $0.68–$0.88 per linear foot, adjusted for Delaware prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Felton
Felton has humid summers and cool-to-cold winters. Late summer and early fall are ideal, before leaves drop.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Felton
How much does gutter installation cost in Felton, DE?
Most gutter installations cost about $650–$1,700 in Felton, DE, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Felton
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Felton building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Felton contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Felton
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Felton: FAQs
How much do new gutters cost in Felton, DE?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Felton?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
How much does gutter installation cost in Felton compared to the national average?
With Delaware's regional cost index of 1.04, expect roughly $650–$1,700 in Felton, versus $622–$1,677 nationally.
How long does gutter installation take in Felton?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Felton can add a few days.
Do I need a permit for gutter installation in Felton?
Some areas require a permit for gutter installation; check locally. Confirm with the Felton or county building department.
Which Felton ZIP codes does this guide cover?
This guide applies to Felton ZIP codes 19943, 19979, plus the surrounding area.
Gutter Installation near Felton
4 mi away · pop. 2,456Woodside East, DE
5 mi away · pop. 2,316Harrington, DE
6 mi away · pop. 3,691Rising Sun-Lebanon, DE
7 mi away · pop. 3,391Camden, DE
8 mi away · pop. 3,505Wyoming, DE
8 mi away · pop. 1,465Highland Acres, DE
8 mi away · pop. 3,459Rodney Village, DE
9 mi away · pop. 1,487Kent Acres, DE
9 mi away · pop. 1,890
Other home services in Felton
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Delaware climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.