Electrical Panel Upgrade · Rexburg, ID

Electrical Panel Upgrade in Rexburg, ID: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

An electrical panel upgrade in Rexburg typically costs about $1,300–$3,000 nationally, with 100-to-200-amp upgrades in the same range. Adjusted for Idaho prices, plan on roughly $1,200–$2,800. In Rexburg, the biggest local factors are long heating season.

Key takeaways

  • Typical cost in Rexburg: $1,200–$2,800 (per installed panel); national range $1,300–$3,000.
  • Biggest local factors: long heating season.
  • How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
  • Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
  • Best timing: Upgrade before adding electric heat or a heat pump for winter.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Idaho contractors.

How much does electrical panel upgrade cost in Rexburg, ID?

An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Idaho prices run 8% below the U.S. average, so a typical Rexburg job lands around $1,200–$2,800. Local labor rates, permit fees and your home's specifics move the final number.

ItemTypical costNotes
100-amp panel installed$800–$1,500
150-amp panel installed$1,300–$1,600
200-amp panel / 100→200 amp upgrade$1,300–$3,000
400-amp service$2,000–$4,000
Meter box$200–$800Must match the new service
Subpanel$400–$1,750
Permit$50–$300Electrician usually pulls it

In a smaller community like Rexburg, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Electrical Panel Upgrade cost questions for Rexburg, ID

  • What is the cost of 100-amp panel installed in Rexburg, ID? The typical cost of 100-amp panel installed in Rexburg, ID is $740–$1,400, adjusted for Idaho prices (national $800–$1,500).
  • What is the cost of 150-amp panel installed in Rexburg, ID? The typical cost of 150-amp panel installed in Rexburg, ID is $1,200–$1,500, adjusted for Idaho prices (national $1,300–$1,600).
  • What is the cost of 200-amp panel / 100→200 amp upgrade in Rexburg, ID? The typical cost of 200-amp panel / 100→200 amp upgrade in Rexburg, ID is $1,200–$2,800, adjusted for Idaho prices (national $1,300–$3,000).
  • What is the cost of 400-amp service in Rexburg, ID? The typical cost of 400-amp service in Rexburg, ID is $1,800–$3,700, adjusted for Idaho prices (national $2,000–$4,000).
  • What is the cost of meter box in Rexburg, ID? The typical cost of meter box in Rexburg, ID is $180–$740, adjusted for Idaho prices (national $200–$800). Must match the new service.
  • What is the cost of subpanel in Rexburg, ID? The typical cost of subpanel in Rexburg, ID is $370–$1,600, adjusted for Idaho prices (national $400–$1,750).
  • What is the cost of permit in Rexburg, ID? The typical cost of permit in Rexburg, ID is $50–$280, adjusted for Idaho prices (national $50–$300). Electrician usually pulls it.
  • What is the cost of move the panel in Rexburg, ID? The typical cost of move the panel in Rexburg, ID is $740–$2,800, adjusted for Idaho prices (national $800–$3,000).
  • What is the cost of main breaker replacement in Rexburg, ID? The typical cost of main breaker replacement in Rexburg, ID is $180–$280, adjusted for Idaho prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
  • What is the cost of AFCI/GFCI breakers in Rexburg, ID? The typical cost of AFCI/GFCI breakers in Rexburg, ID is $30–$60 each, adjusted for Idaho prices (national $35–$60 each). Often required by code.

What affects electrical panel upgrade in Rexburg

Long heating seasonElectric heat and heat pump retrofits in Rexburg often require more electrical capacity.

Rexburg has cold, snowy winters and warm summers. Upgrade before adding electric heat or a heat pump for winter.

Signs you need a panel upgrade

  • Breakers trip often
  • Lights flicker or dim when appliances run
  • You rely on power strips or can't run appliances together
  • The panel buzzes, feels hot or smells burnt
  • Rust or visible damage
  • A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump

Common questions about electrical panel upgrade in Rexburg

How much does an electrical panel upgrade cost in Rexburg, ID?

Most panel upgrades cost about $1,200–$2,800 in Rexburg, ID. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.

Do I need a 200 amp panel?

Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.

Is a Federal Pacific or Zinsco panel dangerous?

Both are widely flagged as outdated, and many electricians recommend replacing them.

How much does a subpanel cost?

A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.

Timeline, permits and DIY in Rexburg

How long it takes

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.

Permits

A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Rexburg building department for local rules.

DIY or hire a pro?

Not a DIY job: a licensed electrician must do the work and coordinate with the utility.

Questions to ask Rexburg contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Did you do a load calculation for my home?
  • Does the quote include the meter, permit and utility coordination?
  • Which breakers will be AFCI or GFCI to meet code?
  • Will the power be off, and for how long?

Maintenance that prevents costly repairs

  • Have the panel inspected if breakers trip often
  • Never ignore buzzing or burning smells
  • Label circuits clearly

How to hire for electrical panel upgrade in Rexburg

  1. Use a licensed, insured electrician.
  2. Ask for a load calculation to size the new service.
  3. Confirm the permit, inspection and utility coordination are included.
  4. Get the warranty for parts and labor in writing.

Electrical Panel Upgrade in Rexburg: FAQs

How much does an electrical panel upgrade cost in Rexburg, ID?

Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.

Do I need a permit for a panel upgrade in Rexburg?

Yes. A licensed electrician typically pulls the permit and coordinates with the utility.

Will I need a panel upgrade to add a heat pump in Rexburg?

Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.

How much does electrical panel upgrade cost in Rexburg compared to the national average?

With Idaho's regional cost index of 0.92, expect roughly $1,200–$2,800 in Rexburg, versus $1,300–$3,000 nationally.

How long does electrical panel upgrade take in Rexburg?

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Rexburg can add a few days.

Do I need a permit for electrical panel upgrade in Rexburg?

A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Rexburg or county building department.

Which Rexburg ZIP codes does this guide cover?

This guide applies to Rexburg ZIP codes 83440, 83441, 83460, plus the surrounding area.

Electrical Panel Upgrade near Rexburg

Other home services in Rexburg

Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Idaho climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.