Gutter Installation · Edwardsville, IL

Gutter Installation & Replacement in Edwardsville, IL: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Edwardsville typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Illinois prices, plan on roughly $680–$1,800. In Edwardsville, the biggest local factors are hard freezes, snow & ice and hail.

Key takeaways

  • Typical cost in Edwardsville: $680–$1,800 (per installation); national range $622–$1,677.
  • Biggest local factors: hard freezes, snow & ice and hail.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Illinois contractors.

How much does gutter installation cost in Edwardsville, IL?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Illinois prices run 10% above the U.S. average, so a typical Edwardsville job lands around $680–$1,800. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Edwardsville, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Edwardsville, IL

  • What is the cost of vinyl in Edwardsville, IL? The typical cost of vinyl in Edwardsville, IL is $0–$10 per linear foot, adjusted for Illinois prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Edwardsville, IL? The typical cost of aluminum in Edwardsville, IL is $0–$20 per linear foot, adjusted for Illinois prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Edwardsville, IL? The typical cost of galvanized steel in Edwardsville, IL is $10–$20 per linear foot, adjusted for Illinois prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Edwardsville, IL? The typical cost of stainless steel in Edwardsville, IL is $10–$20 per linear foot, adjusted for Illinois prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Edwardsville, IL? The typical cost of zinc in Edwardsville, IL is $10–$30 per linear foot, adjusted for Illinois prices (national $10–$29 per linear foot).
  • What is the cost of copper in Edwardsville, IL? The typical cost of copper in Edwardsville, IL is $30–$40+ per linear foot, adjusted for Illinois prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Edwardsville, IL? The typical cost of seamless gutter system in Edwardsville, IL is $880–$5,500 total, adjusted for Illinois prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Edwardsville, IL? The typical cost of downspouts in Edwardsville, IL is $10–$10 per foot, adjusted for Illinois prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Edwardsville, IL? The typical cost of gutter guards in Edwardsville, IL is $10–$10 per linear foot, adjusted for Illinois prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Edwardsville, IL? The typical cost of old gutter removal in Edwardsville, IL is $0.72–$0.94 per linear foot, adjusted for Illinois prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Edwardsville

Hard freezesIce dams in Edwardsville can tear gutters loose; good attic insulation reduces the problem.
Snow & iceHeavy snow and ice around Edwardsville weigh on gutters and cause sagging; heat tape and strong hangers help.
HailHail around Edwardsville dents aluminum gutters.
Severe storms & high windHigh winds around Edwardsville can pull loose gutter sections off the fascia.

Edwardsville has cold, snowy winters and warm summers. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Edwardsville

How much does gutter installation cost in Edwardsville, IL?

Most gutter installations cost about $680–$1,800 in Edwardsville, IL, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Edwardsville

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Edwardsville building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Edwardsville contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Edwardsville

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Edwardsville: FAQs

How much do new gutters cost in Edwardsville, IL?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Edwardsville?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Edwardsville compared to the national average?

With Illinois's regional cost index of 1.10, expect roughly $680–$1,800 in Edwardsville, versus $622–$1,677 nationally.

How long does gutter installation take in Edwardsville?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Edwardsville can add a few days.

Do I need a permit for gutter installation in Edwardsville?

Some areas require a permit for gutter installation; check locally. Confirm with the Edwardsville or county building department.

Which Edwardsville ZIP codes does this guide cover?

This guide applies to Edwardsville ZIP codes 62025, 62026, plus the surrounding area.

Gutter Installation near Edwardsville

Other home services in Edwardsville

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Illinois climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.