Key takeaways
- Typical cost in Greenville: $680–$1,800 (per installation); national range $622–$1,677.
- Biggest local factors: hard freezes, snow & ice and hail.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Install before winter so gutters handle snowmelt and ice.
- Before you hire: get at least three written, itemized quotes from licensed, insured Illinois contractors.
How much does gutter installation cost in Greenville, IL?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Illinois prices run 10% above the U.S. average, so a typical Greenville job lands around $680–$1,800. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
In a smaller community like Greenville, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Greenville, IL
- What is the cost of vinyl in Greenville, IL? The typical cost of vinyl in Greenville, IL is $0–$10 per linear foot, adjusted for Illinois prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Greenville, IL? The typical cost of aluminum in Greenville, IL is $0–$20 per linear foot, adjusted for Illinois prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Greenville, IL? The typical cost of galvanized steel in Greenville, IL is $10–$20 per linear foot, adjusted for Illinois prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Greenville, IL? The typical cost of stainless steel in Greenville, IL is $10–$20 per linear foot, adjusted for Illinois prices (national $9–$20 per linear foot).
- What is the cost of zinc in Greenville, IL? The typical cost of zinc in Greenville, IL is $10–$30 per linear foot, adjusted for Illinois prices (national $10–$29 per linear foot).
- What is the cost of copper in Greenville, IL? The typical cost of copper in Greenville, IL is $30–$40+ per linear foot, adjusted for Illinois prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Greenville, IL? The typical cost of seamless gutter system in Greenville, IL is $880–$5,500 total, adjusted for Illinois prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Greenville, IL? The typical cost of downspouts in Greenville, IL is $10–$10 per foot, adjusted for Illinois prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Greenville, IL? The typical cost of gutter guards in Greenville, IL is $10–$10 per linear foot, adjusted for Illinois prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Greenville, IL? The typical cost of old gutter removal in Greenville, IL is $0.72–$0.94 per linear foot, adjusted for Illinois prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Greenville
Greenville has cold, snowy winters and warm summers. Install before winter so gutters handle snowmelt and ice.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Greenville
How much does gutter installation cost in Greenville, IL?
Most gutter installations cost about $680–$1,800 in Greenville, IL, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Greenville
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Greenville building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Greenville contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Greenville
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Greenville: FAQs
How much do new gutters cost in Greenville, IL?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Greenville?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
What gutters work best in snowy areas?
Heavier-gauge metal gutters with strong hangers handle snow and ice best.
How much does gutter installation cost in Greenville compared to the national average?
With Illinois's regional cost index of 1.10, expect roughly $680–$1,800 in Greenville, versus $622–$1,677 nationally.
How long does gutter installation take in Greenville?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Greenville can add a few days.
Do I need a permit for gutter installation in Greenville?
Some areas require a permit for gutter installation; check locally. Confirm with the Greenville or county building department.
Which Greenville ZIP codes does this guide cover?
This guide applies to Greenville ZIP codes 62086, 62246, 62253, 62284, plus the surrounding area.
Gutter Installation near Greenville
17 mi away · pop. 9,848Vandalia, IL
18 mi away · pop. 7,112Hillsboro, IL
19 mi away · pop. 5,726Carlyle, IL
20 mi away · pop. 3,224Beckemeyer, IL
20 mi away · pop. 1,016Breese, IL
20 mi away · pop. 4,506Mount Olive, IL
21 mi away · pop. 2,013Staunton, IL
22 mi away · pop. 5,018Aviston, IL
22 mi away · pop. 2,084
Other home services in Greenville
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Illinois climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.