Gutter Installation · Hillside, IL

Gutter Installation & Replacement in Hillside, IL: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Hillside typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Illinois prices, plan on roughly $680–$1,800. In Hillside, the biggest local factors are hard freezes, snow & ice and hail.

Key takeaways

  • Typical cost in Hillside: $680–$1,800 (per installation); national range $622–$1,677.
  • Biggest local factors: hard freezes, snow & ice and hail.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Illinois contractors.

How much does gutter installation cost in Hillside, IL?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Illinois prices run 10% above the U.S. average, so a typical Hillside job lands around $680–$1,800. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Hillside, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Hillside, IL

  • What is the cost of vinyl in Hillside, IL? The typical cost of vinyl in Hillside, IL is $0–$10 per linear foot, adjusted for Illinois prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Hillside, IL? The typical cost of aluminum in Hillside, IL is $0–$20 per linear foot, adjusted for Illinois prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Hillside, IL? The typical cost of galvanized steel in Hillside, IL is $10–$20 per linear foot, adjusted for Illinois prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Hillside, IL? The typical cost of stainless steel in Hillside, IL is $10–$20 per linear foot, adjusted for Illinois prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Hillside, IL? The typical cost of zinc in Hillside, IL is $10–$30 per linear foot, adjusted for Illinois prices (national $10–$29 per linear foot).
  • What is the cost of copper in Hillside, IL? The typical cost of copper in Hillside, IL is $30–$40+ per linear foot, adjusted for Illinois prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Hillside, IL? The typical cost of seamless gutter system in Hillside, IL is $880–$5,500 total, adjusted for Illinois prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Hillside, IL? The typical cost of downspouts in Hillside, IL is $10–$10 per foot, adjusted for Illinois prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Hillside, IL? The typical cost of gutter guards in Hillside, IL is $10–$10 per linear foot, adjusted for Illinois prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Hillside, IL? The typical cost of old gutter removal in Hillside, IL is $0.72–$0.94 per linear foot, adjusted for Illinois prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Hillside

Hard freezesIce dams in Hillside can tear gutters loose; good attic insulation reduces the problem.
Snow & iceHeavy snow and ice around Hillside weigh on gutters and cause sagging; heat tape and strong hangers help.
HailHail around Hillside dents aluminum gutters.
Severe storms & high windHigh winds around Hillside can pull loose gutter sections off the fascia.

Hillside has cold, snowy winters and warm summers. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Hillside

How much does gutter installation cost in Hillside, IL?

Most gutter installations cost about $680–$1,800 in Hillside, IL, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Hillside

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Hillside building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Hillside contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Hillside

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Hillside: FAQs

How much do new gutters cost in Hillside, IL?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Hillside?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Hillside compared to the national average?

With Illinois's regional cost index of 1.10, expect roughly $680–$1,800 in Hillside, versus $622–$1,677 nationally.

How long does gutter installation take in Hillside?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Hillside can add a few days.

Do I need a permit for gutter installation in Hillside?

Some areas require a permit for gutter installation; check locally. Confirm with the Hillside or county building department.

Which Hillside ZIP codes does this guide cover?

This guide applies to Hillside ZIP codes 60162, plus the surrounding area.

Gutter Installation near Hillside

Berkeley, IL
1 mi away · pop. 5,203Bellwood, IL
1 mi away · pop. 19,308Stone Park, IL
2 mi away · pop. 4,931Westchester, IL
2 mi away · pop. 16,729Elmhurst, IL
2 mi away · pop. 45,957Broadview, IL
3 mi away · pop. 7,918Northlake, IL
3 mi away · pop. 12,312Melrose Park, IL
3 mi away · pop. 25,379Maywood, IL
3 mi away · pop. 24,012

Other home services in Hillside

HVACAC, furnace and heat pump repair, replacement and costs$7,700–$13,200RoofingRoof replacement, leak repair, hail damage and insurance$7,400–$27,500Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$11,000–$77,000Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$7,300–$19,800Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,400–$5,900Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,200–$42,200Mold RemediationMold removal, testing, costs and insurance$1,700–$5,500Garage Door RepairSprings, cables, openers, off-track doors and costs$90–$740Foundation RepairCracks, settling, piers, slab repair and costs$2,400–$8,600Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$970–$2,000Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,500–$5,900Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$690–$4,800Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,400–$3,300Window ReplacementNew window costs by type, frame material and installation method$330–$2,300Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$9,400–$22,000Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,900–$2,800

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Illinois climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.