Key takeaways
- Typical cost in Romeoville: $1,400–$3,300 (per installed panel); national range $1,300–$3,000.
- Biggest local factors: long heating season, flooding and high humidity.
- How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
- Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
- Best timing: Upgrade before adding electric heat or a heat pump for winter.
- Before you hire: get at least three written, itemized quotes from licensed, insured Illinois contractors.
How much does electrical panel upgrade cost in Romeoville, IL?
An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Illinois prices run 10% above the U.S. average, so a typical Romeoville job lands around $1,400–$3,300. Local labor rates, permit fees and your home's specifics move the final number.
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
In a smaller community like Romeoville, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade cost questions for Romeoville, IL
- What is the cost of 100-amp panel installed in Romeoville, IL? The typical cost of 100-amp panel installed in Romeoville, IL is $880–$1,700, adjusted for Illinois prices (national $800–$1,500).
- What is the cost of 150-amp panel installed in Romeoville, IL? The typical cost of 150-amp panel installed in Romeoville, IL is $1,400–$1,800, adjusted for Illinois prices (national $1,300–$1,600).
- What is the cost of 200-amp panel / 100→200 amp upgrade in Romeoville, IL? The typical cost of 200-amp panel / 100→200 amp upgrade in Romeoville, IL is $1,400–$3,300, adjusted for Illinois prices (national $1,300–$3,000).
- What is the cost of 400-amp service in Romeoville, IL? The typical cost of 400-amp service in Romeoville, IL is $2,200–$4,400, adjusted for Illinois prices (national $2,000–$4,000).
- What is the cost of meter box in Romeoville, IL? The typical cost of meter box in Romeoville, IL is $220–$880, adjusted for Illinois prices (national $200–$800). Must match the new service.
- What is the cost of subpanel in Romeoville, IL? The typical cost of subpanel in Romeoville, IL is $440–$1,900, adjusted for Illinois prices (national $400–$1,750).
- What is the cost of permit in Romeoville, IL? The typical cost of permit in Romeoville, IL is $60–$330, adjusted for Illinois prices (national $50–$300). Electrician usually pulls it.
- What is the cost of move the panel in Romeoville, IL? The typical cost of move the panel in Romeoville, IL is $880–$3,300, adjusted for Illinois prices (national $800–$3,000).
- What is the cost of main breaker replacement in Romeoville, IL? The typical cost of main breaker replacement in Romeoville, IL is $220–$330, adjusted for Illinois prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers in Romeoville, IL? The typical cost of AFCI/GFCI breakers in Romeoville, IL is $40–$70 each, adjusted for Illinois prices (national $35–$60 each). Often required by code.
What affects electrical panel upgrade in Romeoville
Romeoville has cold, snowy winters and warm summers. Upgrade before adding electric heat or a heat pump for winter.
Signs you need a panel upgrade
- Breakers trip often
- Lights flicker or dim when appliances run
- You rely on power strips or can't run appliances together
- The panel buzzes, feels hot or smells burnt
- Rust or visible damage
- A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump
Common questions about electrical panel upgrade in Romeoville
How much does an electrical panel upgrade cost in Romeoville, IL?
Most panel upgrades cost about $1,400–$3,300 in Romeoville, IL. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.
Do I need a 200 amp panel?
Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.
Is a Federal Pacific or Zinsco panel dangerous?
Both are widely flagged as outdated, and many electricians recommend replacing them.
How much does a subpanel cost?
A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.
Timeline, permits and DIY in Romeoville
How long it takes
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
Permits
A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Romeoville building department for local rules.
DIY or hire a pro?
Not a DIY job: a licensed electrician must do the work and coordinate with the utility.
Questions to ask Romeoville contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Did you do a load calculation for my home?
- Does the quote include the meter, permit and utility coordination?
- Which breakers will be AFCI or GFCI to meet code?
- Will the power be off, and for how long?
Maintenance that prevents costly repairs
- Have the panel inspected if breakers trip often
- Never ignore buzzing or burning smells
- Label circuits clearly
How to hire for electrical panel upgrade in Romeoville
- Use a licensed, insured electrician.
- Ask for a load calculation to size the new service.
- Confirm the permit, inspection and utility coordination are included.
- Get the warranty for parts and labor in writing.
Electrical Panel Upgrade in Romeoville: FAQs
How much does an electrical panel upgrade cost in Romeoville, IL?
Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.
Do I need a permit for a panel upgrade in Romeoville?
Yes. A licensed electrician typically pulls the permit and coordinates with the utility.
Will I need a panel upgrade to add a heat pump in Romeoville?
Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.
How much does electrical panel upgrade cost in Romeoville compared to the national average?
With Illinois's regional cost index of 1.10, expect roughly $1,400–$3,300 in Romeoville, versus $1,300–$3,000 nationally.
How long does electrical panel upgrade take in Romeoville?
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Romeoville can add a few days.
Do I need a permit for electrical panel upgrade in Romeoville?
A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Romeoville or county building department.
Which Romeoville ZIP codes does this guide cover?
This guide applies to Romeoville ZIP codes 60446, plus the surrounding area.
Electrical Panel Upgrade near Romeoville
4 mi away · pop. 74,306Joliet, IL
8 mi away · pop. 147,861Lockport, IL
4 mi away · pop. 25,175Lemont, IL
5 mi away · pop. 16,788Plainfield, IL
6 mi away · pop. 42,527Crystal Lawns, IL
6 mi away · pop. 1,872Crest Hill, IL
6 mi away · pop. 21,153Fairmont, IL
7 mi away · pop. 2,459Woodridge, IL
7 mi away · pop. 33,370
Other home services in Romeoville
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Illinois climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.