Key takeaways
- Typical cost in Augusta: $1,200–$2,700 (per installed panel); national range $1,300–$3,000.
- How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
- Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
- Best timing: Any season works; schedule with the utility in advance.
- Before you hire: get at least three written, itemized quotes from licensed, insured Kansas contractors.
How much does electrical panel upgrade cost in Augusta, KS?
An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Kansas prices run 10% below the U.S. average, so a typical Augusta job lands around $1,200–$2,700. Local labor rates, permit fees and your home's specifics move the final number.
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
In a smaller community like Augusta, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade cost questions for Augusta, KS
- What is the cost of 100-amp panel installed in Augusta, KS? The typical cost of 100-amp panel installed in Augusta, KS is $720–$1,400, adjusted for Kansas prices (national $800–$1,500).
- What is the cost of 150-amp panel installed in Augusta, KS? The typical cost of 150-amp panel installed in Augusta, KS is $1,200–$1,400, adjusted for Kansas prices (national $1,300–$1,600).
- What is the cost of 200-amp panel / 100→200 amp upgrade in Augusta, KS? The typical cost of 200-amp panel / 100→200 amp upgrade in Augusta, KS is $1,200–$2,700, adjusted for Kansas prices (national $1,300–$3,000).
- What is the cost of 400-amp service in Augusta, KS? The typical cost of 400-amp service in Augusta, KS is $1,800–$3,600, adjusted for Kansas prices (national $2,000–$4,000).
- What is the cost of meter box in Augusta, KS? The typical cost of meter box in Augusta, KS is $180–$720, adjusted for Kansas prices (national $200–$800). Must match the new service.
- What is the cost of subpanel in Augusta, KS? The typical cost of subpanel in Augusta, KS is $360–$1,600, adjusted for Kansas prices (national $400–$1,750).
- What is the cost of permit in Augusta, KS? The typical cost of permit in Augusta, KS is $50–$270, adjusted for Kansas prices (national $50–$300). Electrician usually pulls it.
- What is the cost of move the panel in Augusta, KS? The typical cost of move the panel in Augusta, KS is $720–$2,700, adjusted for Kansas prices (national $800–$3,000).
- What is the cost of main breaker replacement in Augusta, KS? The typical cost of main breaker replacement in Augusta, KS is $180–$270, adjusted for Kansas prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers in Augusta, KS? The typical cost of AFCI/GFCI breakers in Augusta, KS is $30–$50 each, adjusted for Kansas prices (national $35–$60 each). Often required by code.
What affects electrical panel upgrade in Augusta
Augusta doesn't face an unusual climate hazard for this work, so price and timing mostly come down to your home's size, age and the materials you choose.
Augusta has humid summers and cool-to-cold winters. Any season works; schedule with the utility in advance.
Signs you need a panel upgrade
- Breakers trip often
- Lights flicker or dim when appliances run
- You rely on power strips or can't run appliances together
- The panel buzzes, feels hot or smells burnt
- Rust or visible damage
- A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump
Common questions about electrical panel upgrade in Augusta
How much does an electrical panel upgrade cost in Augusta, KS?
Most panel upgrades cost about $1,200–$2,700 in Augusta, KS. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.
Do I need a 200 amp panel?
Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.
Is a Federal Pacific or Zinsco panel dangerous?
Both are widely flagged as outdated, and many electricians recommend replacing them.
How much does a subpanel cost?
A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.
Timeline, permits and DIY in Augusta
How long it takes
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
Permits
A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Augusta building department for local rules.
DIY or hire a pro?
Not a DIY job: a licensed electrician must do the work and coordinate with the utility.
Questions to ask Augusta contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Did you do a load calculation for my home?
- Does the quote include the meter, permit and utility coordination?
- Which breakers will be AFCI or GFCI to meet code?
- Will the power be off, and for how long?
Maintenance that prevents costly repairs
- Have the panel inspected if breakers trip often
- Never ignore buzzing or burning smells
- Label circuits clearly
How to hire for electrical panel upgrade in Augusta
- Use a licensed, insured electrician.
- Ask for a load calculation to size the new service.
- Confirm the permit, inspection and utility coordination are included.
- Get the warranty for parts and labor in writing.
Electrical Panel Upgrade in Augusta: FAQs
How much does an electrical panel upgrade cost in Augusta, KS?
Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.
Do I need a permit for a panel upgrade in Augusta?
Yes. A licensed electrician typically pulls the permit and coordinates with the utility.
Will I need a panel upgrade to add a heat pump in Augusta?
Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.
How much does electrical panel upgrade cost in Augusta compared to the national average?
With Kansas's regional cost index of 0.90, expect roughly $1,200–$2,700 in Augusta, versus $1,300–$3,000 nationally.
How long does electrical panel upgrade take in Augusta?
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Augusta can add a few days.
Do I need a permit for electrical panel upgrade in Augusta?
A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Augusta or county building department.
Which Augusta ZIP codes does this guide cover?
This guide applies to Augusta ZIP codes 67010, plus the surrounding area.
Electrical Panel Upgrade near Augusta
8 mi away · pop. 1,428Andover, KS
9 mi away · pop. 12,745El Dorado, KS
11 mi away · pop. 12,931Douglass, KS
12 mi away · pop. 1,695Rose Hill, KS
12 mi away · pop. 3,995McConnell AFB, KS
16 mi away · pop. 1,777Clay Center, KS
16 mi away · pop. 4,300Bellaire, KS
17 mi away · pop. 3,934Kechi, KS
18 mi away · pop. 1,996
Other home services in Augusta
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Kansas climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.