Key takeaways
- Typical cost in Chevy Chase: $1,300–$3,000 (per installed panel); national range $1,300–$3,000.
- Biggest local factors: high humidity and flooding.
- How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
- Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
- Best timing: Any season works; schedule with the utility in advance.
- Before you hire: get at least three written, itemized quotes from licensed, insured Maryland contractors.
How much does electrical panel upgrade cost in Chevy Chase, MD?
An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Maryland prices run at the U.S. average, so a typical Chevy Chase job lands around $1,300–$3,000. Local labor rates, permit fees and your home's specifics move the final number.
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
In a smaller community like Chevy Chase, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade cost questions for Chevy Chase, MD
- What is the cost of 100-amp panel installed in Chevy Chase, MD? The typical cost of 100-amp panel installed in Chevy Chase, MD is $800–$1,500.
- What is the cost of 150-amp panel installed in Chevy Chase, MD? The typical cost of 150-amp panel installed in Chevy Chase, MD is $1,300–$1,600.
- What is the cost of 200-amp panel / 100→200 amp upgrade in Chevy Chase, MD? The typical cost of 200-amp panel / 100→200 amp upgrade in Chevy Chase, MD is $1,300–$3,000.
- What is the cost of 400-amp service in Chevy Chase, MD? The typical cost of 400-amp service in Chevy Chase, MD is $2,000–$4,000.
- What is the cost of meter box in Chevy Chase, MD? The typical cost of meter box in Chevy Chase, MD is $200–$800. Must match the new service.
- What is the cost of subpanel in Chevy Chase, MD? The typical cost of subpanel in Chevy Chase, MD is $400–$1,750.
- What is the cost of permit in Chevy Chase, MD? The typical cost of permit in Chevy Chase, MD is $50–$300. Electrician usually pulls it.
- What is the cost of move the panel in Chevy Chase, MD? The typical cost of move the panel in Chevy Chase, MD is $800–$3,000.
- What is the cost of main breaker replacement in Chevy Chase, MD? The typical cost of main breaker replacement in Chevy Chase, MD is $200–$300. $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers in Chevy Chase, MD? The typical cost of AFCI/GFCI breakers in Chevy Chase, MD is $35–$60 each. Often required by code.
What affects electrical panel upgrade in Chevy Chase
Chevy Chase has humid summers and cool-to-cold winters. Any season works; schedule with the utility in advance.
Signs you need a panel upgrade
- Breakers trip often
- Lights flicker or dim when appliances run
- You rely on power strips or can't run appliances together
- The panel buzzes, feels hot or smells burnt
- Rust or visible damage
- A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump
Common questions about electrical panel upgrade in Chevy Chase
How much does an electrical panel upgrade cost in Chevy Chase, MD?
Most panel upgrades cost about $1,300–$3,000 in Chevy Chase, MD. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.
Do I need a 200 amp panel?
Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.
Is a Federal Pacific or Zinsco panel dangerous?
Both are widely flagged as outdated, and many electricians recommend replacing them.
How much does a subpanel cost?
A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.
Timeline, permits and DIY in Chevy Chase
How long it takes
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
Permits
A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Chevy Chase building department for local rules.
DIY or hire a pro?
Not a DIY job: a licensed electrician must do the work and coordinate with the utility.
Questions to ask Chevy Chase contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Did you do a load calculation for my home?
- Does the quote include the meter, permit and utility coordination?
- Which breakers will be AFCI or GFCI to meet code?
- Will the power be off, and for how long?
Maintenance that prevents costly repairs
- Have the panel inspected if breakers trip often
- Never ignore buzzing or burning smells
- Label circuits clearly
How to hire for electrical panel upgrade in Chevy Chase
- Use a licensed, insured electrician.
- Ask for a load calculation to size the new service.
- Confirm the permit, inspection and utility coordination are included.
- Get the warranty for parts and labor in writing.
Electrical Panel Upgrade in Chevy Chase: FAQs
How much does an electrical panel upgrade cost in Chevy Chase, MD?
Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.
Do I need a permit for a panel upgrade in Chevy Chase?
Yes. A licensed electrician typically pulls the permit and coordinates with the utility.
Will I need a panel upgrade to add a heat pump in Chevy Chase?
Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.
How much does electrical panel upgrade cost in Chevy Chase compared to the national average?
With Maryland's regional cost index of 1.00, expect roughly $1,300–$3,000 in Chevy Chase, versus $1,300–$3,000 nationally.
How long does electrical panel upgrade take in Chevy Chase?
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Chevy Chase can add a few days.
Do I need a permit for electrical panel upgrade in Chevy Chase?
A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Chevy Chase or county building department.
Which Chevy Chase ZIP codes does this guide cover?
This guide applies to Chevy Chase ZIP codes 20815, 20825, plus the surrounding area.
Electrical Panel Upgrade near Chevy Chase
2 mi away · pop. 60,858Silver Spring, MD
3 mi away · pop. 71,452Forest Glen, MD
1 mi away · pop. 6,582South Kensington, MD
1 mi away · pop. 8,462Kensington, MD
2 mi away · pop. 2,330North Kensington, MD
2 mi away · pop. 9,514Chevy Chase Village, MD
2 mi away · pop. 2,060Chevy Chase, DC
3 mi away · pop. 9,545Wheaton, MD
3 mi away · pop. 48,284
Other home services in Chevy Chase
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Maryland climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.