Gutter Installation · Temple Hills, MD

Gutter Installation & Replacement in Temple Hills, MD: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Temple Hills typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Maryland prices, plan on roughly $620–$1,700. In Temple Hills, the biggest local factors are hard freezes and severe storms & high wind.

Key takeaways

  • Typical cost in Temple Hills: $620–$1,700 (per installation); national range $622–$1,677.
  • Biggest local factors: hard freezes and severe storms & high wind.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Late summer and early fall are ideal, before leaves drop.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Maryland contractors.

How much does gutter installation cost in Temple Hills, MD?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Maryland prices run at the U.S. average, so a typical Temple Hills job lands around $620–$1,700. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Temple Hills, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Temple Hills, MD

  • What is the cost of vinyl in Temple Hills, MD? The typical cost of vinyl in Temple Hills, MD is $3–$6 per linear foot.
  • What is the cost of aluminum in Temple Hills, MD? The typical cost of aluminum in Temple Hills, MD is $4–$14 per linear foot. Dents easily.
  • What is the cost of galvanized steel in Temple Hills, MD? The typical cost of galvanized steel in Temple Hills, MD is $6–$14 per linear foot.
  • What is the cost of stainless steel in Temple Hills, MD? The typical cost of stainless steel in Temple Hills, MD is $9–$20 per linear foot.
  • What is the cost of zinc in Temple Hills, MD? The typical cost of zinc in Temple Hills, MD is $10–$29 per linear foot.
  • What is the cost of copper in Temple Hills, MD? The typical cost of copper in Temple Hills, MD is $25–$40+ per linear foot. Up to 50 years.
  • What is the cost of seamless gutter system in Temple Hills, MD? The typical cost of seamless gutter system in Temple Hills, MD is $800–$5,000 total. Cut on site.
  • What is the cost of downspouts in Temple Hills, MD? The typical cost of downspouts in Temple Hills, MD is $5–$12 per foot. Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Temple Hills, MD? The typical cost of gutter guards in Temple Hills, MD is $7–$12 per linear foot. Installed.
  • What is the cost of old gutter removal in Temple Hills, MD? The typical cost of old gutter removal in Temple Hills, MD is $0.65–$0.85 per linear foot. Extra stories add $1–$3/ft labor.

What affects gutter installation in Temple Hills

Hard freezesIce dams in Temple Hills can tear gutters loose; good attic insulation reduces the problem.
Severe storms & high windHigh winds around Temple Hills can pull loose gutter sections off the fascia.

Temple Hills has humid summers and cool-to-cold winters. Late summer and early fall are ideal, before leaves drop.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Temple Hills

How much does gutter installation cost in Temple Hills, MD?

Most gutter installations cost about $620–$1,700 in Temple Hills, MD, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Temple Hills

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Temple Hills building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Temple Hills contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Temple Hills

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Temple Hills: FAQs

How much do new gutters cost in Temple Hills, MD?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Temple Hills?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

How much does gutter installation cost in Temple Hills compared to the national average?

With Maryland's regional cost index of 1.00, expect roughly $620–$1,700 in Temple Hills, versus $622–$1,677 nationally.

How long does gutter installation take in Temple Hills?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Temple Hills can add a few days.

Do I need a permit for gutter installation in Temple Hills?

Some areas require a permit for gutter installation; check locally. Confirm with the Temple Hills or county building department.

Which Temple Hills ZIP codes does this guide cover?

This guide applies to Temple Hills ZIP codes 20748, 20757, plus the surrounding area.

Gutter Installation near Temple Hills

Marlow Heights, MD
1 mi away · pop. 5,618Hillcrest Heights, MD
2 mi away · pop. 16,469Silver Hill, MD
2 mi away · pop. 5,950Oxon Hill-Glassmanor, MD
2 mi away · pop. 35,355Camp Springs, MD
2 mi away · pop. 19,096Oxon Hill, MD
2 mi away · pop. 17,722Suitland-Silver Hill, MD
3 mi away · pop. 33,515Suitland, MD
3 mi away · pop. 25,825Forest Heights, MD
3 mi away · pop. 2,573

Other home services in Temple Hills

HVACAC, furnace and heat pump repair, replacement and costs$7,000–$12,000RoofingRoof replacement, leak repair, hail damage and insurance$6,700–$25,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,000–$70,000Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,600–$18,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,400Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,900–$38,300Mold RemediationMold removal, testing, costs and insurance$1,500–$5,000Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$680Foundation RepairCracks, settling, piers, slab repair and costs$2,200–$7,800Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$880–$1,800Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,400–$5,300Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$630–$4,400Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,300–$3,000Window ReplacementNew window costs by type, frame material and installation method$300–$2,100Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$8,500–$20,000Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,700–$2,500

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Maryland climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.