Gutter Installation · Rice, MN

Gutter Installation & Replacement in Rice, MN: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Rice typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Minnesota prices, plan on roughly $660–$1,800. In Rice, the biggest local factors are snow & ice, hard freezes and hail.

Key takeaways

  • Typical cost in Rice: $660–$1,800 (per installation); national range $622–$1,677.
  • Biggest local factors: snow & ice, hard freezes and hail.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Minnesota contractors.

How much does gutter installation cost in Rice, MN?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Minnesota prices run 6% above the U.S. average, so a typical Rice job lands around $660–$1,800. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Rice, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Rice, MN

  • What is the cost of vinyl in Rice, MN? The typical cost of vinyl in Rice, MN is $0–$10 per linear foot, adjusted for Minnesota prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Rice, MN? The typical cost of aluminum in Rice, MN is $0–$10 per linear foot, adjusted for Minnesota prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Rice, MN? The typical cost of galvanized steel in Rice, MN is $10–$10 per linear foot, adjusted for Minnesota prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Rice, MN? The typical cost of stainless steel in Rice, MN is $10–$20 per linear foot, adjusted for Minnesota prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Rice, MN? The typical cost of zinc in Rice, MN is $10–$30 per linear foot, adjusted for Minnesota prices (national $10–$29 per linear foot).
  • What is the cost of copper in Rice, MN? The typical cost of copper in Rice, MN is $30–$40+ per linear foot, adjusted for Minnesota prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Rice, MN? The typical cost of seamless gutter system in Rice, MN is $850–$5,300 total, adjusted for Minnesota prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Rice, MN? The typical cost of downspouts in Rice, MN is $10–$10 per foot, adjusted for Minnesota prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Rice, MN? The typical cost of gutter guards in Rice, MN is $10–$10 per linear foot, adjusted for Minnesota prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Rice, MN? The typical cost of old gutter removal in Rice, MN is $0.69–$0.90 per linear foot, adjusted for Minnesota prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Rice

Snow & iceHeavy snow and ice around Rice weigh on gutters and cause sagging; heat tape and strong hangers help.
Hard freezesIce dams in Rice can tear gutters loose; good attic insulation reduces the problem.
HailHail around Rice dents aluminum gutters.

Rice has long, very cold winters. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Rice

How much does gutter installation cost in Rice, MN?

Most gutter installations cost about $660–$1,800 in Rice, MN, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Rice

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Rice building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Rice contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Rice

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Rice: FAQs

How much do new gutters cost in Rice, MN?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Rice?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Rice compared to the national average?

With Minnesota's regional cost index of 1.06, expect roughly $660–$1,800 in Rice, versus $622–$1,677 nationally.

How long does gutter installation take in Rice?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Rice can add a few days.

Do I need a permit for gutter installation in Rice?

Some areas require a permit for gutter installation; check locally. Confirm with the Rice or county building department.

Which Rice ZIP codes does this guide cover?

This guide applies to Rice ZIP codes 56367, 56375, plus the surrounding area.

Gutter Installation near Rice

Saint Cloud, MN
13 mi away · pop. 65,842Royalton, MN
6 mi away · pop. 1,215Sartell, MN
9 mi away · pop. 16,788Sauk Rapids, MN
11 mi away · pop. 13,424Collegeville, MN
13 mi away · pop. 3,516Waite Park, MN
13 mi away · pop. 7,517Saint Joseph, MN
14 mi away · pop. 6,534Avon, MN
15 mi away · pop. 1,466Foley, MN
16 mi away · pop. 2,656

Other home services in Rice

HVACAC, furnace and heat pump repair, replacement and costs$7,400–$12,700RoofingRoof replacement, leak repair, hail damage and insurance$7,100–$26,500Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,600–$74,200Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$7,000–$19,100Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,700Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,100–$40,600Mold RemediationMold removal, testing, costs and insurance$1,600–$5,300Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$720Foundation RepairCracks, settling, piers, slab repair and costs$2,300–$8,300Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$930–$1,900Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,500–$5,600Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$670–$4,700Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,400–$3,200Window ReplacementNew window costs by type, frame material and installation method$320–$2,200Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$9,000–$21,200Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,800–$2,700

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Minnesota climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.