Key takeaways
- Typical cost in Raleigh: $7,200–$17,000 (for a 2,000 sq ft home); national range $8,500–$20,000.
- Biggest local factors: severe storms & high wind, high humidity and hail.
- How long it takes: Installation time depends on home size and material; finalize quotes about 3 months ahead.
- Permits: Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections.
- Best timing: Schedule in fall or spring to avoid extreme heat during installation.
- Before you hire: get at least three written, itemized quotes from licensed, insured Mississippi contractors.
How much does siding replacement cost in Raleigh, MS?
Siding replacement for a typical 2,000 sq ft home costs $8,500–$20,000, with an average around $14,500. Material choice is the biggest price driver. Mississippi prices run 15% below the U.S. average, so a typical Raleigh job lands around $7,200–$17,000. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost (per sq ft installed) | Notes |
|---|---|---|
| Vinyl | $3–$12 | Most common |
| Fiber cement | $5–$14 | Durable, fire resistant |
| Engineered wood | $2–$10 | |
| Wood | $2–$15 | Needs regular repainting or stain |
| Steel | $4–$16 | |
| Aluminum | $3–$10 | |
| Stucco | $7–$17 |
In a smaller community like Raleigh, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Siding Replacement cost questions for Raleigh, MS
- What is the cost of vinyl in Raleigh, MS? The typical cost of vinyl in Raleigh, MS is $0–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $3–$12). Most common.
- What is the cost of fiber cement in Raleigh, MS? The typical cost of fiber cement in Raleigh, MS is $0–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $5–$14). Durable, fire resistant.
- What is the cost of engineered wood in Raleigh, MS? The typical cost of engineered wood in Raleigh, MS is $0–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $2–$10).
- What is the cost of wood in Raleigh, MS? The typical cost of wood in Raleigh, MS is $0–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $2–$15). Needs regular repainting or stain.
- What is the cost of steel in Raleigh, MS? The typical cost of steel in Raleigh, MS is $0–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $4–$16).
- What is the cost of aluminum in Raleigh, MS? The typical cost of aluminum in Raleigh, MS is $0–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $3–$10).
- What is the cost of stucco in Raleigh, MS? The typical cost of stucco in Raleigh, MS is $10–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $7–$17).
- What is the cost of brick veneer in Raleigh, MS? The typical cost of brick veneer in Raleigh, MS is $10–$20 (typical cost per sq ft installed), adjusted for Mississippi prices (national $8–$21).
- What is the cost of stone veneer in Raleigh, MS? The typical cost of stone veneer in Raleigh, MS is $0–$10 (typical cost per sq ft installed), adjusted for Mississippi prices (national $5–$11).
- What is the cost of labor in Raleigh, MS? The typical cost of labor in Raleigh, MS is $0–$0 per sq ft (typical cost per sq ft installed), adjusted for Mississippi prices (national $1–$4 per sq ft). $1,800–$8,000 for an average home.
What affects siding replacement in Raleigh
Raleigh has hot, humid summers and mild winters. Schedule in fall or spring to avoid extreme heat during installation.
Signs you need new siding
- Damage spread across large areas
- Repair costs approaching half the cost of replacement
- Rot or moisture problems behind panels
- Cracked, warped or missing panels
- New indoor drafts
- Fresh water stains on interior walls
Common questions about siding replacement in Raleigh
How much does siding replacement cost in Raleigh, MS?
Residing a typical 2,000 sq ft home costs about $7,200–$17,000 in Raleigh, MS, or roughly $3–$15 per square foot installed.
How much does siding cost per square foot?
Installed prices run about $3–$12 for vinyl, $5–$14 for fiber cement, $2–$10 for engineered wood and $7–$17 for stucco.
Fiber cement or vinyl siding?
Fiber cement costs more but lasts 30–50 years versus 20–40 for vinyl, and it resists fire better.
How much does it cost to remove old siding?
Removing old siding typically costs $1,000–$2,500.
Timeline, permits and DIY in Raleigh
How long it takes
Installation time depends on home size and material; finalize quotes about 3 months ahead.
Permits
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Check with the Raleigh building department for local rules.
DIY or hire a pro?
Hire a pro: installation errors can trap moisture and void warranties.
Questions to ask Raleigh contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Does the quote include tear-off, house wrap and trim?
- Are you certified by the siding manufacturer?
- How will you handle rot found under old siding?
- What workmanship warranty do you offer?
Maintenance that prevents costly repairs
- Wash siding once a year
- Recaulk gaps around windows and trim
- Repaint or restain wood siding on schedule
How to hire for siding replacement in Raleigh
- Get three itemized quotes covering material, trim, wrap and removal.
- Ask whether the installer is certified by the siding manufacturer.
- Confirm permit and inspection costs are included.
- Get workmanship and product warranties in writing.
Siding Replacement in Raleigh: FAQs
How much does siding replacement cost in Raleigh, MS?
Nationally, residing a 2,000 sq ft home costs about $8,500–$20,000. Material and local labor rates set the final price.
What siding holds up best to hail in Raleigh?
Impact-resistant materials like fiber cement tend to hold up better than thin vinyl or aluminum.
Does homeowners insurance cover siding damage in Raleigh?
Sudden storm or hail damage is often covered, minus your deductible; wear and age aren't.
How much does siding replacement cost in Raleigh compared to the national average?
With Mississippi's regional cost index of 0.85, expect roughly $7,200–$17,000 in Raleigh, versus $8,500–$20,000 nationally.
How long does siding replacement take in Raleigh?
Installation time depends on home size and material; finalize quotes about 3 months ahead. Permit and inspection scheduling in Raleigh can add a few days.
Do I need a permit for siding replacement in Raleigh?
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Confirm with the Raleigh or county building department.
Which Raleigh ZIP codes does this guide cover?
This guide applies to Raleigh ZIP codes 39153, plus the surrounding area.
Siding Replacement near Raleigh
14 mi away · pop. 1,738Taylorsville, MS
15 mi away · pop. 1,302Magee, MS
17 mi away · pop. 4,368Mendenhall, MS
21 mi away · pop. 2,488Forest, MS
23 mi away · pop. 5,695Morton, MS
23 mi away · pop. 3,439Pelahatchie, MS
25 mi away · pop. 1,356Collins, MS
27 mi away · pop. 2,570Newton, MS
29 mi away · pop. 3,356
Other home services in Raleigh
Sources: Fixr — House siding cost · Angi — What is siding · Angi — Siding installation and repair. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Mississippi climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.