Gutter Installation · Great Falls, MT

Gutter Installation & Replacement in Great Falls, MT: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Great Falls typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Montana prices, plan on roughly $580–$1,600. In Great Falls, the biggest local factors are snow & ice, hard freezes and hail.

Key takeaways

  • Typical cost in Great Falls: $580–$1,600 (per installation); national range $622–$1,677.
  • Biggest local factors: snow & ice, hard freezes and hail.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Montana contractors.

How much does gutter installation cost in Great Falls, MT?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Montana prices run 7% below the U.S. average, so a typical Great Falls job lands around $580–$1,600. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

Great Falls is big enough to have a solid pool of local contractors, and many regional companies also serve the area, so getting three quotes is easy.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Great Falls, MT

  • What is the cost of vinyl in Great Falls, MT? The typical cost of vinyl in Great Falls, MT is $0–$10 per linear foot, adjusted for Montana prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Great Falls, MT? The typical cost of aluminum in Great Falls, MT is $0–$10 per linear foot, adjusted for Montana prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Great Falls, MT? The typical cost of galvanized steel in Great Falls, MT is $10–$10 per linear foot, adjusted for Montana prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Great Falls, MT? The typical cost of stainless steel in Great Falls, MT is $10–$20 per linear foot, adjusted for Montana prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Great Falls, MT? The typical cost of zinc in Great Falls, MT is $10–$30 per linear foot, adjusted for Montana prices (national $10–$29 per linear foot).
  • What is the cost of copper in Great Falls, MT? The typical cost of copper in Great Falls, MT is $20–$40+ per linear foot, adjusted for Montana prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Great Falls, MT? The typical cost of seamless gutter system in Great Falls, MT is $740–$4,700 total, adjusted for Montana prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Great Falls, MT? The typical cost of downspouts in Great Falls, MT is $0–$10 per foot, adjusted for Montana prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Great Falls, MT? The typical cost of gutter guards in Great Falls, MT is $10–$10 per linear foot, adjusted for Montana prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Great Falls, MT? The typical cost of old gutter removal in Great Falls, MT is $0.60–$0.79 per linear foot, adjusted for Montana prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Great Falls

Snow & iceHeavy snow and ice around Great Falls weigh on gutters and cause sagging; heat tape and strong hangers help.
Hard freezesIce dams in Great Falls can tear gutters loose; good attic insulation reduces the problem.
HailHail around Great Falls dents aluminum gutters.

Great Falls has long, very cold winters. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Great Falls

How much does gutter installation cost in Great Falls, MT?

Most gutter installations cost about $580–$1,600 in Great Falls, MT, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Great Falls

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Great Falls building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Great Falls contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Great Falls

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Great Falls: FAQs

How much do new gutters cost in Great Falls, MT?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Great Falls?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Great Falls compared to the national average?

With Montana's regional cost index of 0.93, expect roughly $580–$1,600 in Great Falls, versus $622–$1,677 nationally.

How long does gutter installation take in Great Falls?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Great Falls can add a few days.

Do I need a permit for gutter installation in Great Falls?

Some areas require a permit for gutter installation; check locally. Confirm with the Great Falls or county building department.

Which Great Falls ZIP codes does this guide cover?

This guide applies to Great Falls ZIP codes 59401, 59402, 59403, 59404, 59405, 59406, 59414, plus the surrounding area.

Gutter Installation near Great Falls

Malmstrom Air Force Base, MT
6 mi away · pop. 3,472Sun Prairie, MT
9 mi away · pop. 1,630Fort Benton, MT
37 mi away · pop. 1,460Choteau, MT
46 mi away · pop. 1,696Conrad, MT
55 mi away · pop. 2,593Stanford, MT
56 mi away · pop. 381Helena Valley Northeast, MT
63 mi away · pop. 2,995Helena Valley Northwest, MT
64 mi away · pop. 3,482Helena Valley Southeast, MT
68 mi away · pop. 8,227

Other home services in Great Falls

HVACAC, furnace and heat pump repair, replacement and costs$6,500–$11,200RoofingRoof replacement, leak repair, hail damage and insurance$6,200–$23,300Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$9,300–$65,100Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,100–$16,700Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,200–$5,000Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,700–$35,600Mold RemediationMold removal, testing, costs and insurance$1,400–$4,700Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$630Foundation RepairCracks, settling, piers, slab repair and costs$2,000–$7,300Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$820–$1,700Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,300–$5,000Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$590–$4,100Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,200–$2,800Window ReplacementNew window costs by type, frame material and installation method$280–$2,000Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,900–$18,600Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,600–$2,300

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Montana climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.