Key takeaways
- Typical cost in Brentwood: $1,600–$3,600 (per installed panel); national range $1,300–$3,000.
- Biggest local factors: long heating season, flooding and high humidity.
- How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
- Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
- Best timing: Upgrade before adding electric heat or a heat pump for winter.
- Before you hire: get at least three written, itemized quotes from licensed, insured New York contractors.
How much does electrical panel upgrade cost in Brentwood, NY?
An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. New York prices run 20% above the U.S. average, so a typical Brentwood job lands around $1,600–$3,600. Local labor rates, permit fees and your home's specifics move the final number.
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
Brentwood is big enough to have a solid pool of local contractors, and many regional companies also serve the area, so getting three quotes is easy.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade cost questions for Brentwood, NY
- What is the cost of 100-amp panel installed in Brentwood, NY? The typical cost of 100-amp panel installed in Brentwood, NY is $960–$1,800, adjusted for New York prices (national $800–$1,500).
- What is the cost of 150-amp panel installed in Brentwood, NY? The typical cost of 150-amp panel installed in Brentwood, NY is $1,600–$1,900, adjusted for New York prices (national $1,300–$1,600).
- What is the cost of 200-amp panel / 100→200 amp upgrade in Brentwood, NY? The typical cost of 200-amp panel / 100→200 amp upgrade in Brentwood, NY is $1,600–$3,600, adjusted for New York prices (national $1,300–$3,000).
- What is the cost of 400-amp service in Brentwood, NY? The typical cost of 400-amp service in Brentwood, NY is $2,400–$4,800, adjusted for New York prices (national $2,000–$4,000).
- What is the cost of meter box in Brentwood, NY? The typical cost of meter box in Brentwood, NY is $240–$960, adjusted for New York prices (national $200–$800). Must match the new service.
- What is the cost of subpanel in Brentwood, NY? The typical cost of subpanel in Brentwood, NY is $480–$2,100, adjusted for New York prices (national $400–$1,750).
- What is the cost of permit in Brentwood, NY? The typical cost of permit in Brentwood, NY is $60–$360, adjusted for New York prices (national $50–$300). Electrician usually pulls it.
- What is the cost of move the panel in Brentwood, NY? The typical cost of move the panel in Brentwood, NY is $960–$3,600, adjusted for New York prices (national $800–$3,000).
- What is the cost of main breaker replacement in Brentwood, NY? The typical cost of main breaker replacement in Brentwood, NY is $240–$360, adjusted for New York prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers in Brentwood, NY? The typical cost of AFCI/GFCI breakers in Brentwood, NY is $40–$70 each, adjusted for New York prices (national $35–$60 each). Often required by code.
What affects electrical panel upgrade in Brentwood
Brentwood has cold, snowy winters and warm summers. Upgrade before adding electric heat or a heat pump for winter.
Signs you need a panel upgrade
- Breakers trip often
- Lights flicker or dim when appliances run
- You rely on power strips or can't run appliances together
- The panel buzzes, feels hot or smells burnt
- Rust or visible damage
- A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump
Common questions about electrical panel upgrade in Brentwood
How much does an electrical panel upgrade cost in Brentwood, NY?
Most panel upgrades cost about $1,600–$3,600 in Brentwood, NY. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.
Do I need a 200 amp panel?
Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.
Is a Federal Pacific or Zinsco panel dangerous?
Both are widely flagged as outdated, and many electricians recommend replacing them.
How much does a subpanel cost?
A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.
Timeline, permits and DIY in Brentwood
How long it takes
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
Permits
A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Brentwood building department for local rules.
DIY or hire a pro?
Not a DIY job: a licensed electrician must do the work and coordinate with the utility.
Questions to ask Brentwood contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Did you do a load calculation for my home?
- Does the quote include the meter, permit and utility coordination?
- Which breakers will be AFCI or GFCI to meet code?
- Will the power be off, and for how long?
Maintenance that prevents costly repairs
- Have the panel inspected if breakers trip often
- Never ignore buzzing or burning smells
- Label circuits clearly
How to hire for electrical panel upgrade in Brentwood
- Use a licensed, insured electrician.
- Ask for a load calculation to size the new service.
- Confirm the permit, inspection and utility coordination are included.
- Get the warranty for parts and labor in writing.
Electrical Panel Upgrade in Brentwood: FAQs
How much does an electrical panel upgrade cost in Brentwood, NY?
Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.
Do I need a permit for a panel upgrade in Brentwood?
Yes. A licensed electrician typically pulls the permit and coordinates with the utility.
Will I need a panel upgrade to add a heat pump in Brentwood?
Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.
How much does electrical panel upgrade cost in Brentwood compared to the national average?
With New York's regional cost index of 1.20, expect roughly $1,600–$3,600 in Brentwood, versus $1,300–$3,000 nationally.
How long does electrical panel upgrade take in Brentwood?
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Brentwood can add a few days.
Do I need a permit for electrical panel upgrade in Brentwood?
A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Brentwood or county building department.
Which Brentwood ZIP codes does this guide cover?
This guide applies to Brentwood ZIP codes 11717, plus the surrounding area.
Electrical Panel Upgrade near Brentwood
2 mi away · pop. 34,450Bay Wood, NY
3 mi away · pop. 7,350North Bay Shore, NY
3 mi away · pop. 18,944Hauppauge, NY
4 mi away · pop. 20,882Islip Terrace, NY
4 mi away · pop. 5,389Bay Shore, NY
4 mi away · pop. 26,337Islip, NY
4 mi away · pop. 18,689Brightwaters, NY
4 mi away · pop. 3,088Islandia, NY
4 mi away · pop. 3,382
Other home services in Brentwood
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general New York climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.