Key takeaways
- Typical cost in Burgaw: $1,100–$2,600 (per installed panel); national range $1,300–$3,000.
- Biggest local factors: high humidity and flooding.
- How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
- Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
- Best timing: Any season works; schedule with the utility in advance.
- Before you hire: get at least three written, itemized quotes from licensed, insured North Carolina contractors.
How much does electrical panel upgrade cost in Burgaw, NC?
An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. North Carolina prices run 13% below the U.S. average, so a typical Burgaw job lands around $1,100–$2,600. Local labor rates, permit fees and your home's specifics move the final number.
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
In a smaller community like Burgaw, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade cost questions for Burgaw, NC
- What is the cost of 100-amp panel installed in Burgaw, NC? The typical cost of 100-amp panel installed in Burgaw, NC is $700–$1,300, adjusted for North Carolina prices (national $800–$1,500).
- What is the cost of 150-amp panel installed in Burgaw, NC? The typical cost of 150-amp panel installed in Burgaw, NC is $1,100–$1,400, adjusted for North Carolina prices (national $1,300–$1,600).
- What is the cost of 200-amp panel / 100→200 amp upgrade in Burgaw, NC? The typical cost of 200-amp panel / 100→200 amp upgrade in Burgaw, NC is $1,100–$2,600, adjusted for North Carolina prices (national $1,300–$3,000).
- What is the cost of 400-amp service in Burgaw, NC? The typical cost of 400-amp service in Burgaw, NC is $1,700–$3,500, adjusted for North Carolina prices (national $2,000–$4,000).
- What is the cost of meter box in Burgaw, NC? The typical cost of meter box in Burgaw, NC is $170–$700, adjusted for North Carolina prices (national $200–$800). Must match the new service.
- What is the cost of subpanel in Burgaw, NC? The typical cost of subpanel in Burgaw, NC is $350–$1,500, adjusted for North Carolina prices (national $400–$1,750).
- What is the cost of permit in Burgaw, NC? The typical cost of permit in Burgaw, NC is $40–$260, adjusted for North Carolina prices (national $50–$300). Electrician usually pulls it.
- What is the cost of move the panel in Burgaw, NC? The typical cost of move the panel in Burgaw, NC is $700–$2,600, adjusted for North Carolina prices (national $800–$3,000).
- What is the cost of main breaker replacement in Burgaw, NC? The typical cost of main breaker replacement in Burgaw, NC is $170–$260, adjusted for North Carolina prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers in Burgaw, NC? The typical cost of AFCI/GFCI breakers in Burgaw, NC is $30–$50 each, adjusted for North Carolina prices (national $35–$60 each). Often required by code.
What affects electrical panel upgrade in Burgaw
Burgaw has humid summers and cool-to-cold winters. Any season works; schedule with the utility in advance.
Signs you need a panel upgrade
- Breakers trip often
- Lights flicker or dim when appliances run
- You rely on power strips or can't run appliances together
- The panel buzzes, feels hot or smells burnt
- Rust or visible damage
- A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump
Common questions about electrical panel upgrade in Burgaw
How much does an electrical panel upgrade cost in Burgaw, NC?
Most panel upgrades cost about $1,100–$2,600 in Burgaw, NC. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.
Do I need a 200 amp panel?
Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.
Is a Federal Pacific or Zinsco panel dangerous?
Both are widely flagged as outdated, and many electricians recommend replacing them.
How much does a subpanel cost?
A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.
Timeline, permits and DIY in Burgaw
How long it takes
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
Permits
A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Burgaw building department for local rules.
DIY or hire a pro?
Not a DIY job: a licensed electrician must do the work and coordinate with the utility.
Questions to ask Burgaw contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Did you do a load calculation for my home?
- Does the quote include the meter, permit and utility coordination?
- Which breakers will be AFCI or GFCI to meet code?
- Will the power be off, and for how long?
Maintenance that prevents costly repairs
- Have the panel inspected if breakers trip often
- Never ignore buzzing or burning smells
- Label circuits clearly
How to hire for electrical panel upgrade in Burgaw
- Use a licensed, insured electrician.
- Ask for a load calculation to size the new service.
- Confirm the permit, inspection and utility coordination are included.
- Get the warranty for parts and labor in writing.
Electrical Panel Upgrade in Burgaw: FAQs
How much does an electrical panel upgrade cost in Burgaw, NC?
Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.
Do I need a permit for a panel upgrade in Burgaw?
Yes. A licensed electrician typically pulls the permit and coordinates with the utility.
Will I need a panel upgrade to add a heat pump in Burgaw?
Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.
How much does electrical panel upgrade cost in Burgaw compared to the national average?
With North Carolina's regional cost index of 0.87, expect roughly $1,100–$2,600 in Burgaw, versus $1,300–$3,000 nationally.
How long does electrical panel upgrade take in Burgaw?
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Burgaw can add a few days.
Do I need a permit for electrical panel upgrade in Burgaw?
A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Burgaw or county building department.
Which Burgaw ZIP codes does this guide cover?
This guide applies to Burgaw ZIP codes 28421, 28425, 28454, plus the surrounding area.
Electrical Panel Upgrade near Burgaw
8 mi away · pop. 1,602Wallace, NC
13 mi away · pop. 3,964Castle Hayne, NC
14 mi away · pop. 1,202Skippers Corner, NC
14 mi away · pop. 2,785Northchase, NC
17 mi away · pop. 3,747Hampstead, NC
18 mi away · pop. 4,083Wrightsboro, NC
18 mi away · pop. 4,896Murraysville, NC
18 mi away · pop. 14,215Bayshore, NC
20 mi away · pop. 3,393
Other home services in Burgaw
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general North Carolina climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.