Gutter Installation · Coats, NC

Gutter Installation & Replacement in Coats, NC: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Coats typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for North Carolina prices, plan on roughly $540–$1,500. In Coats, the biggest local factors are severe storms & high wind.

Key takeaways

  • Typical cost in Coats: $540–$1,500 (per installation); national range $622–$1,677.
  • Biggest local factors: severe storms & high wind.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Late summer and early fall are ideal, before leaves drop.
  • Before you hire: get at least three written, itemized quotes from licensed, insured North Carolina contractors.

How much does gutter installation cost in Coats, NC?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. North Carolina prices run 13% below the U.S. average, so a typical Coats job lands around $540–$1,500. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Coats, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Coats, NC

  • What is the cost of vinyl in Coats, NC? The typical cost of vinyl in Coats, NC is $0–$10 per linear foot, adjusted for North Carolina prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Coats, NC? The typical cost of aluminum in Coats, NC is $0–$10 per linear foot, adjusted for North Carolina prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Coats, NC? The typical cost of galvanized steel in Coats, NC is $10–$10 per linear foot, adjusted for North Carolina prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Coats, NC? The typical cost of stainless steel in Coats, NC is $10–$20 per linear foot, adjusted for North Carolina prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Coats, NC? The typical cost of zinc in Coats, NC is $10–$30 per linear foot, adjusted for North Carolina prices (national $10–$29 per linear foot).
  • What is the cost of copper in Coats, NC? The typical cost of copper in Coats, NC is $20–$30+ per linear foot, adjusted for North Carolina prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Coats, NC? The typical cost of seamless gutter system in Coats, NC is $700–$4,400 total, adjusted for North Carolina prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Coats, NC? The typical cost of downspouts in Coats, NC is $0–$10 per foot, adjusted for North Carolina prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Coats, NC? The typical cost of gutter guards in Coats, NC is $10–$10 per linear foot, adjusted for North Carolina prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Coats, NC? The typical cost of old gutter removal in Coats, NC is $0.57–$0.74 per linear foot, adjusted for North Carolina prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Coats

Severe storms & high windHigh winds around Coats can pull loose gutter sections off the fascia.

Coats has humid summers and cool-to-cold winters. Late summer and early fall are ideal, before leaves drop.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Coats

How much does gutter installation cost in Coats, NC?

Most gutter installations cost about $540–$1,500 in Coats, NC, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Coats

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Coats building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Coats contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Coats

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Coats: FAQs

How much do new gutters cost in Coats, NC?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Coats?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

How much does gutter installation cost in Coats compared to the national average?

With North Carolina's regional cost index of 0.87, expect roughly $540–$1,500 in Coats, versus $622–$1,677 nationally.

How long does gutter installation take in Coats?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Coats can add a few days.

Do I need a permit for gutter installation in Coats?

Some areas require a permit for gutter installation; check locally. Confirm with the Coats or county building department.

Which Coats ZIP codes does this guide cover?

This guide applies to Coats ZIP codes 27521, plus the surrounding area.

Gutter Installation near Coats

Buies Creek, NC
4 mi away · pop. 2,942Erwin, NC
6 mi away · pop. 4,679Benson, NC
7 mi away · pop. 3,591Angier, NC
8 mi away · pop. 4,970Dunn, NC
8 mi away · pop. 9,723Lillington, NC
8 mi away · pop. 3,476Plain View, NC
13 mi away · pop. 1,961Four Oaks, NC
14 mi away · pop. 2,050Fuquay-Varina, NC
14 mi away · pop. 23,907

Other home services in Coats

HVACAC, furnace and heat pump repair, replacement and costs$6,100–$10,400RoofingRoof replacement, leak repair, hail damage and insurance$5,800–$21,800Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$8,700–$60,900Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$5,700–$15,700Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,100–$4,700Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,500–$33,300Mold RemediationMold removal, testing, costs and insurance$1,300–$4,400Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$590Foundation RepairCracks, settling, piers, slab repair and costs$1,900–$6,800Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$770–$1,600Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,200–$4,600Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$550–$3,800Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,100–$2,600Window ReplacementNew window costs by type, frame material and installation method$260–$1,800Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,400–$17,400Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,500–$2,200

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general North Carolina climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.