Key takeaways
- Typical cost in Apache: $540–$1,500 (per installation); national range $622–$1,677.
- Biggest local factors: hail and severe storms & high wind.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Late summer and early fall are ideal, before leaves drop.
- Before you hire: get at least three written, itemized quotes from licensed, insured Oklahoma contractors.
How much does gutter installation cost in Apache, OK?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Oklahoma prices run 13% below the U.S. average, so a typical Apache job lands around $540–$1,500. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
In a smaller community like Apache, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Apache, OK
- What is the cost of vinyl in Apache, OK? The typical cost of vinyl in Apache, OK is $0–$10 per linear foot, adjusted for Oklahoma prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Apache, OK? The typical cost of aluminum in Apache, OK is $0–$10 per linear foot, adjusted for Oklahoma prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Apache, OK? The typical cost of galvanized steel in Apache, OK is $10–$10 per linear foot, adjusted for Oklahoma prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Apache, OK? The typical cost of stainless steel in Apache, OK is $10–$20 per linear foot, adjusted for Oklahoma prices (national $9–$20 per linear foot).
- What is the cost of zinc in Apache, OK? The typical cost of zinc in Apache, OK is $10–$30 per linear foot, adjusted for Oklahoma prices (national $10–$29 per linear foot).
- What is the cost of copper in Apache, OK? The typical cost of copper in Apache, OK is $20–$30+ per linear foot, adjusted for Oklahoma prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Apache, OK? The typical cost of seamless gutter system in Apache, OK is $700–$4,400 total, adjusted for Oklahoma prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Apache, OK? The typical cost of downspouts in Apache, OK is $0–$10 per foot, adjusted for Oklahoma prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Apache, OK? The typical cost of gutter guards in Apache, OK is $10–$10 per linear foot, adjusted for Oklahoma prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Apache, OK? The typical cost of old gutter removal in Apache, OK is $0.57–$0.74 per linear foot, adjusted for Oklahoma prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Apache
Apache has humid summers and cool-to-cold winters. Late summer and early fall are ideal, before leaves drop.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Apache
How much does gutter installation cost in Apache, OK?
Most gutter installations cost about $540–$1,500 in Apache, OK, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Apache
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Apache building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Apache contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Apache
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Apache: FAQs
How much do new gutters cost in Apache, OK?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Apache?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
How much does gutter installation cost in Apache compared to the national average?
With Oklahoma's regional cost index of 0.87, expect roughly $540–$1,500 in Apache, versus $622–$1,677 nationally.
How long does gutter installation take in Apache?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Apache can add a few days.
Do I need a permit for gutter installation in Apache?
Some areas require a permit for gutter installation; check locally. Confirm with the Apache or county building department.
Which Apache ZIP codes does this guide cover?
This guide applies to Apache ZIP codes 73006, plus the surrounding area.
Gutter Installation near Apache
20 mi away · pop. 96,655Fletcher, OK
8 mi away · pop. 1,169Elgin, OK
9 mi away · pop. 2,969Cyril, OK
9 mi away · pop. 1,046Anadarko, OK
14 mi away · pop. 6,717Carnegie, OK
20 mi away · pop. 1,700Cache, OK
24 mi away · pop. 2,925Central High, OK
24 mi away · pop. 1,184Rush Springs, OK
24 mi away · pop. 1,275
Other home services in Apache
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Oklahoma climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.