Gutter Installation · Philadelphia, PA

Gutter Installation & Replacement in Philadelphia, PA: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Philadelphia typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Pennsylvania prices, plan on roughly $650–$1,700. In Philadelphia, the biggest local factors are hard freezes and snow & ice.

Key takeaways

  • Typical cost in Philadelphia: $650–$1,700 (per installation); national range $622–$1,677.
  • Biggest local factors: hard freezes and snow & ice.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Pennsylvania contractors.

What Philadelphia homeowners should know

Philadelphia is a city of rowhouses, many more than a century old, with flat roofs, shared walls and stone or brick basements. Freeze-thaw cycles, nor'easters and summer thunderstorms test aging roofs and masonry, and basement seepage is common.

Many older homes still have galvanized or cast-iron plumbing and original electrical systems, which can turn a simple remodel into a larger project once walls are opened.

How much does gutter installation cost in Philadelphia, PA?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Pennsylvania prices run 4% above the U.S. average, so a typical Philadelphia job lands around $650–$1,700. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

As a large city, Philadelphia has plenty of contractors competing for work, which helps on price, but busy seasons can mean longer waits. Book early after major storms.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Philadelphia, PA

  • What is the cost of vinyl in Philadelphia, PA? The typical cost of vinyl in Philadelphia, PA is $0–$10 per linear foot, adjusted for Pennsylvania prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Philadelphia, PA? The typical cost of aluminum in Philadelphia, PA is $0–$10 per linear foot, adjusted for Pennsylvania prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Philadelphia, PA? The typical cost of galvanized steel in Philadelphia, PA is $10–$10 per linear foot, adjusted for Pennsylvania prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Philadelphia, PA? The typical cost of stainless steel in Philadelphia, PA is $10–$20 per linear foot, adjusted for Pennsylvania prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Philadelphia, PA? The typical cost of zinc in Philadelphia, PA is $10–$30 per linear foot, adjusted for Pennsylvania prices (national $10–$29 per linear foot).
  • What is the cost of copper in Philadelphia, PA? The typical cost of copper in Philadelphia, PA is $30–$40+ per linear foot, adjusted for Pennsylvania prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Philadelphia, PA? The typical cost of seamless gutter system in Philadelphia, PA is $830–$5,200 total, adjusted for Pennsylvania prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Philadelphia, PA? The typical cost of downspouts in Philadelphia, PA is $10–$10 per foot, adjusted for Pennsylvania prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Philadelphia, PA? The typical cost of gutter guards in Philadelphia, PA is $10–$10 per linear foot, adjusted for Pennsylvania prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Philadelphia, PA? The typical cost of old gutter removal in Philadelphia, PA is $0.68–$0.88 per linear foot, adjusted for Pennsylvania prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Philadelphia

Hard freezesIce dams in Philadelphia can tear gutters loose; good attic insulation reduces the problem.
Snow & iceHeavy snow and ice around Philadelphia weigh on gutters and cause sagging; heat tape and strong hangers help.

Philadelphia has cold, snowy winters and warm summers. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Philadelphia

How much does gutter installation cost in Philadelphia, PA?

Most gutter installations cost about $650–$1,700 in Philadelphia, PA, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Philadelphia

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Philadelphia building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Philadelphia contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Philadelphia

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Philadelphia: FAQs

How much do new gutters cost in Philadelphia, PA?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Philadelphia?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Philadelphia compared to the national average?

With Pennsylvania's regional cost index of 1.04, expect roughly $650–$1,700 in Philadelphia, versus $622–$1,677 nationally.

How long does gutter installation take in Philadelphia?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Philadelphia can add a few days.

Do I need a permit for gutter installation in Philadelphia?

Some areas require a permit for gutter installation; check locally. Confirm with the Philadelphia or county building department.

Which Philadelphia ZIP codes does this guide cover?

This guide applies to Philadelphia ZIP codes 19019, 19092, 19093, 19099, 19101, 19102, 19103, 19104, 19105, 19106, 19107, 19108, 19109, 19110, 19111, 19112, 19113, 19114, 19115, 19116, 19118, 19119, 19120, 19121, 19122 and more, plus the surrounding area.

Gutter Installation near Philadelphia

Camden, NJ
3 mi away · pop. 76,119Wood-Lynne, NJ
4 mi away · pop. 2,978Millbourne, PA
5 mi away · pop. 1,162Gloucester City, NJ
5 mi away · pop. 11,329Yeadon, PA
5 mi away · pop. 11,523Merchantville, NJ
5 mi away · pop. 3,821East Lansdowne, PA
5 mi away · pop. 2,665Bala-Cynwyd, PA
5 mi away · pop. 9,299Collingswood, NJ
5 mi away · pop. 14,000

Other home services in Philadelphia

HVACAC, furnace and heat pump repair, replacement and costs$7,300–$12,500RoofingRoof replacement, leak repair, hail damage and insurance$7,000–$26,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,400–$72,800Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,900–$18,700Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,600Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,000–$39,900Mold RemediationMold removal, testing, costs and insurance$1,600–$5,200Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$700Foundation RepairCracks, settling, piers, slab repair and costs$2,300–$8,100Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$920–$1,900Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,400–$5,500Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$660–$4,600Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,400–$3,100Window ReplacementNew window costs by type, frame material and installation method$310–$2,200Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$8,800–$20,800Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,800–$2,600

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Pennsylvania climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.