Key takeaways
- Typical cost in Ninety Six: $7,400–$17,400 (for a 2,000 sq ft home); national range $8,500–$20,000.
- Biggest local factors: severe storms & high wind and high humidity.
- How long it takes: Installation time depends on home size and material; finalize quotes about 3 months ahead.
- Permits: Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections.
- Best timing: Schedule in fall or spring to avoid extreme heat during installation.
- Before you hire: get at least three written, itemized quotes from licensed, insured South Carolina contractors.
How much does siding replacement cost in Ninety Six, SC?
Siding replacement for a typical 2,000 sq ft home costs $8,500–$20,000, with an average around $14,500. Material choice is the biggest price driver. South Carolina prices run 13% below the U.S. average, so a typical Ninety Six job lands around $7,400–$17,400. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost (per sq ft installed) | Notes |
|---|---|---|
| Vinyl | $3–$12 | Most common |
| Fiber cement | $5–$14 | Durable, fire resistant |
| Engineered wood | $2–$10 | |
| Wood | $2–$15 | Needs regular repainting or stain |
| Steel | $4–$16 | |
| Aluminum | $3–$10 | |
| Stucco | $7–$17 |
In a smaller community like Ninety Six, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Siding Replacement cost questions for Ninety Six, SC
- What is the cost of vinyl in Ninety Six, SC? The typical cost of vinyl in Ninety Six, SC is $0–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $3–$12). Most common.
- What is the cost of fiber cement in Ninety Six, SC? The typical cost of fiber cement in Ninety Six, SC is $0–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $5–$14). Durable, fire resistant.
- What is the cost of engineered wood in Ninety Six, SC? The typical cost of engineered wood in Ninety Six, SC is $0–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $2–$10).
- What is the cost of wood in Ninety Six, SC? The typical cost of wood in Ninety Six, SC is $0–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $2–$15). Needs regular repainting or stain.
- What is the cost of steel in Ninety Six, SC? The typical cost of steel in Ninety Six, SC is $0–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $4–$16).
- What is the cost of aluminum in Ninety Six, SC? The typical cost of aluminum in Ninety Six, SC is $0–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $3–$10).
- What is the cost of stucco in Ninety Six, SC? The typical cost of stucco in Ninety Six, SC is $10–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $7–$17).
- What is the cost of brick veneer in Ninety Six, SC? The typical cost of brick veneer in Ninety Six, SC is $10–$20 (typical cost per sq ft installed), adjusted for South Carolina prices (national $8–$21).
- What is the cost of stone veneer in Ninety Six, SC? The typical cost of stone veneer in Ninety Six, SC is $0–$10 (typical cost per sq ft installed), adjusted for South Carolina prices (national $5–$11).
- What is the cost of labor in Ninety Six, SC? The typical cost of labor in Ninety Six, SC is $0–$0 per sq ft (typical cost per sq ft installed), adjusted for South Carolina prices (national $1–$4 per sq ft). $1,800–$8,000 for an average home.
What affects siding replacement in Ninety Six
Ninety Six has hot, humid summers and mild winters. Schedule in fall or spring to avoid extreme heat during installation.
Signs you need new siding
- Damage spread across large areas
- Repair costs approaching half the cost of replacement
- Rot or moisture problems behind panels
- Cracked, warped or missing panels
- New indoor drafts
- Fresh water stains on interior walls
Common questions about siding replacement in Ninety Six
How much does siding replacement cost in Ninety Six, SC?
Residing a typical 2,000 sq ft home costs about $7,400–$17,400 in Ninety Six, SC, or roughly $3–$15 per square foot installed.
How much does siding cost per square foot?
Installed prices run about $3–$12 for vinyl, $5–$14 for fiber cement, $2–$10 for engineered wood and $7–$17 for stucco.
Fiber cement or vinyl siding?
Fiber cement costs more but lasts 30–50 years versus 20–40 for vinyl, and it resists fire better.
How much does it cost to remove old siding?
Removing old siding typically costs $1,000–$2,500.
Timeline, permits and DIY in Ninety Six
How long it takes
Installation time depends on home size and material; finalize quotes about 3 months ahead.
Permits
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Check with the Ninety Six building department for local rules.
DIY or hire a pro?
Hire a pro: installation errors can trap moisture and void warranties.
Questions to ask Ninety Six contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Does the quote include tear-off, house wrap and trim?
- Are you certified by the siding manufacturer?
- How will you handle rot found under old siding?
- What workmanship warranty do you offer?
Maintenance that prevents costly repairs
- Wash siding once a year
- Recaulk gaps around windows and trim
- Repaint or restain wood siding on schedule
How to hire for siding replacement in Ninety Six
- Get three itemized quotes covering material, trim, wrap and removal.
- Ask whether the installer is certified by the siding manufacturer.
- Confirm permit and inspection costs are included.
- Get workmanship and product warranties in writing.
Siding Replacement in Ninety Six: FAQs
How much does siding replacement cost in Ninety Six, SC?
Nationally, residing a 2,000 sq ft home costs about $8,500–$20,000. Material and local labor rates set the final price.
Does homeowners insurance cover siding damage in Ninety Six?
Sudden storm or hail damage is often covered, minus your deductible; wear and age aren't.
How much does siding replacement cost in Ninety Six compared to the national average?
With South Carolina's regional cost index of 0.87, expect roughly $7,400–$17,400 in Ninety Six, versus $8,500–$20,000 nationally.
How long does siding replacement take in Ninety Six?
Installation time depends on home size and material; finalize quotes about 3 months ahead. Permit and inspection scheduling in Ninety Six can add a few days.
Do I need a permit for siding replacement in Ninety Six?
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Confirm with the Ninety Six or county building department.
Which Ninety Six ZIP codes does this guide cover?
This guide applies to Ninety Six ZIP codes 29037, 29332, 29666, plus the surrounding area.
Siding Replacement near Ninety Six
8 mi away · pop. 23,260Saluda, SC
19 mi away · pop. 3,596Ware Shoals, SC
20 mi away · pop. 2,175Abbeville, SC
20 mi away · pop. 5,191Joanna, SC
21 mi away · pop. 1,539Clinton, SC
22 mi away · pop. 8,637Laurens, SC
22 mi away · pop. 9,166Due West, SC
23 mi away · pop. 1,239Watts Mills, SC
24 mi away · pop. 1,635
Other home services in Ninety Six
Sources: Fixr — House siding cost · Angi — What is siding · Angi — Siding installation and repair. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general South Carolina climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.