Gutter Installation · Tea, SD

Gutter Installation & Replacement in Tea, SD: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Tea typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for South Dakota prices, plan on roughly $550–$1,500. In Tea, the biggest local factors are snow & ice, hard freezes and hail.

Key takeaways

  • Typical cost in Tea: $550–$1,500 (per installation); national range $622–$1,677.
  • Biggest local factors: snow & ice, hard freezes and hail.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured South Dakota contractors.

How much does gutter installation cost in Tea, SD?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. South Dakota prices run 12% below the U.S. average, so a typical Tea job lands around $550–$1,500. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Tea, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Tea, SD

  • What is the cost of vinyl in Tea, SD? The typical cost of vinyl in Tea, SD is $0–$10 per linear foot, adjusted for South Dakota prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Tea, SD? The typical cost of aluminum in Tea, SD is $0–$10 per linear foot, adjusted for South Dakota prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Tea, SD? The typical cost of galvanized steel in Tea, SD is $10–$10 per linear foot, adjusted for South Dakota prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Tea, SD? The typical cost of stainless steel in Tea, SD is $10–$20 per linear foot, adjusted for South Dakota prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Tea, SD? The typical cost of zinc in Tea, SD is $10–$30 per linear foot, adjusted for South Dakota prices (national $10–$29 per linear foot).
  • What is the cost of copper in Tea, SD? The typical cost of copper in Tea, SD is $20–$40+ per linear foot, adjusted for South Dakota prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Tea, SD? The typical cost of seamless gutter system in Tea, SD is $700–$4,400 total, adjusted for South Dakota prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Tea, SD? The typical cost of downspouts in Tea, SD is $0–$10 per foot, adjusted for South Dakota prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Tea, SD? The typical cost of gutter guards in Tea, SD is $10–$10 per linear foot, adjusted for South Dakota prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Tea, SD? The typical cost of old gutter removal in Tea, SD is $0.57–$0.75 per linear foot, adjusted for South Dakota prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Tea

Snow & iceHeavy snow and ice around Tea weigh on gutters and cause sagging; heat tape and strong hangers help.
Hard freezesIce dams in Tea can tear gutters loose; good attic insulation reduces the problem.
HailHail around Tea dents aluminum gutters.
Severe storms & high windHigh winds around Tea can pull loose gutter sections off the fascia.

Tea has cold, snowy winters and warm summers. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Tea

How much does gutter installation cost in Tea, SD?

Most gutter installations cost about $550–$1,500 in Tea, SD, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Tea

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Tea building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Tea contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Tea

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Tea: FAQs

How much do new gutters cost in Tea, SD?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Tea?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Tea compared to the national average?

With South Dakota's regional cost index of 0.88, expect roughly $550–$1,500 in Tea, versus $622–$1,677 nationally.

How long does gutter installation take in Tea?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Tea can add a few days.

Do I need a permit for gutter installation in Tea?

Some areas require a permit for gutter installation; check locally. Confirm with the Tea or county building department.

Which Tea ZIP codes does this guide cover?

This guide applies to Tea ZIP codes 57064, plus the surrounding area.

Gutter Installation near Tea

Sioux Falls, SD
10 mi away · pop. 171,544Lennox, SD
7 mi away · pop. 2,272Harrisburg, SD
7 mi away · pop. 5,498Hartford, SD
13 mi away · pop. 3,025Crooks, SD
15 mi away · pop. 1,329Parker, SD
15 mi away · pop. 993Canton, SD
16 mi away · pop. 3,331Brandon, SD
17 mi away · pop. 9,856Baltic, SD
22 mi away · pop. 1,132

Other home services in Tea

HVACAC, furnace and heat pump repair, replacement and costs$6,200–$10,600RoofingRoof replacement, leak repair, hail damage and insurance$5,900–$22,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$8,800–$61,600Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$5,800–$15,800Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,100–$4,700Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,600–$33,700Mold RemediationMold removal, testing, costs and insurance$1,300–$4,400Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$590Foundation RepairCracks, settling, piers, slab repair and costs$1,900–$6,900Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$780–$1,600Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,200–$4,700Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$550–$3,900Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,100–$2,600Window ReplacementNew window costs by type, frame material and installation method$260–$1,800Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,500–$17,600Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,500–$2,200

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general South Dakota climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.