Key takeaways
- Typical cost in Jellico: $1,200–$2,700 (per installed panel); national range $1,300–$3,000.
- Biggest local factors: high humidity and flooding.
- How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
- Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
- Best timing: Any season works; schedule with the utility in advance.
- Before you hire: get at least three written, itemized quotes from licensed, insured Tennessee contractors.
How much does electrical panel upgrade cost in Jellico, TN?
An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Tennessee prices run 11% below the U.S. average, so a typical Jellico job lands around $1,200–$2,700. Local labor rates, permit fees and your home's specifics move the final number.
| Item | Typical cost | Notes |
|---|---|---|
| 100-amp panel installed | $800–$1,500 | |
| 150-amp panel installed | $1,300–$1,600 | |
| 200-amp panel / 100→200 amp upgrade | $1,300–$3,000 | |
| 400-amp service | $2,000–$4,000 | |
| Meter box | $200–$800 | Must match the new service |
| Subpanel | $400–$1,750 | |
| Permit | $50–$300 | Electrician usually pulls it |
In a smaller community like Jellico, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Electrical Panel Upgrade cost questions for Jellico, TN
- What is the cost of 100-amp panel installed in Jellico, TN? The typical cost of 100-amp panel installed in Jellico, TN is $710–$1,300, adjusted for Tennessee prices (national $800–$1,500).
- What is the cost of 150-amp panel installed in Jellico, TN? The typical cost of 150-amp panel installed in Jellico, TN is $1,200–$1,400, adjusted for Tennessee prices (national $1,300–$1,600).
- What is the cost of 200-amp panel / 100→200 amp upgrade in Jellico, TN? The typical cost of 200-amp panel / 100→200 amp upgrade in Jellico, TN is $1,200–$2,700, adjusted for Tennessee prices (national $1,300–$3,000).
- What is the cost of 400-amp service in Jellico, TN? The typical cost of 400-amp service in Jellico, TN is $1,800–$3,600, adjusted for Tennessee prices (national $2,000–$4,000).
- What is the cost of meter box in Jellico, TN? The typical cost of meter box in Jellico, TN is $180–$710, adjusted for Tennessee prices (national $200–$800). Must match the new service.
- What is the cost of subpanel in Jellico, TN? The typical cost of subpanel in Jellico, TN is $360–$1,600, adjusted for Tennessee prices (national $400–$1,750).
- What is the cost of permit in Jellico, TN? The typical cost of permit in Jellico, TN is $40–$270, adjusted for Tennessee prices (national $50–$300). Electrician usually pulls it.
- What is the cost of move the panel in Jellico, TN? The typical cost of move the panel in Jellico, TN is $710–$2,700, adjusted for Tennessee prices (national $800–$3,000).
- What is the cost of main breaker replacement in Jellico, TN? The typical cost of main breaker replacement in Jellico, TN is $180–$270, adjusted for Tennessee prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
- What is the cost of AFCI/GFCI breakers in Jellico, TN? The typical cost of AFCI/GFCI breakers in Jellico, TN is $30–$50 each, adjusted for Tennessee prices (national $35–$60 each). Often required by code.
What affects electrical panel upgrade in Jellico
Jellico has humid summers and cool-to-cold winters. Any season works; schedule with the utility in advance.
Signs you need a panel upgrade
- Breakers trip often
- Lights flicker or dim when appliances run
- You rely on power strips or can't run appliances together
- The panel buzzes, feels hot or smells burnt
- Rust or visible damage
- A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump
Common questions about electrical panel upgrade in Jellico
How much does an electrical panel upgrade cost in Jellico, TN?
Most panel upgrades cost about $1,200–$2,700 in Jellico, TN. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.
Do I need a 200 amp panel?
Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.
Is a Federal Pacific or Zinsco panel dangerous?
Both are widely flagged as outdated, and many electricians recommend replacing them.
How much does a subpanel cost?
A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.
Timeline, permits and DIY in Jellico
How long it takes
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
Permits
A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Jellico building department for local rules.
DIY or hire a pro?
Not a DIY job: a licensed electrician must do the work and coordinate with the utility.
Questions to ask Jellico contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Did you do a load calculation for my home?
- Does the quote include the meter, permit and utility coordination?
- Which breakers will be AFCI or GFCI to meet code?
- Will the power be off, and for how long?
Maintenance that prevents costly repairs
- Have the panel inspected if breakers trip often
- Never ignore buzzing or burning smells
- Label circuits clearly
How to hire for electrical panel upgrade in Jellico
- Use a licensed, insured electrician.
- Ask for a load calculation to size the new service.
- Confirm the permit, inspection and utility coordination are included.
- Get the warranty for parts and labor in writing.
Electrical Panel Upgrade in Jellico: FAQs
How much does an electrical panel upgrade cost in Jellico, TN?
Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.
Do I need a permit for a panel upgrade in Jellico?
Yes. A licensed electrician typically pulls the permit and coordinates with the utility.
Will I need a panel upgrade to add a heat pump in Jellico?
Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.
How much does electrical panel upgrade cost in Jellico compared to the national average?
With Tennessee's regional cost index of 0.89, expect roughly $1,200–$2,700 in Jellico, versus $1,300–$3,000 nationally.
How long does electrical panel upgrade take in Jellico?
Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Jellico can add a few days.
Do I need a permit for electrical panel upgrade in Jellico?
A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Jellico or county building department.
Which Jellico ZIP codes does this guide cover?
This guide applies to Jellico ZIP codes 37715, 37730, 37762, 37819, 37851, plus the surrounding area.
Electrical Panel Upgrade near Jellico
11 mi away · pop. 5,293Fincastle, TN
13 mi away · pop. 1,618LaFollette, TN
14 mi away · pop. 7,456Pine Knot, KY
18 mi away · pop. 1,621Jacksboro, TN
18 mi away · pop. 1,951Caryville, TN
21 mi away · pop. 2,200Stearns, KY
21 mi away · pop. 1,416Whitley City, KY
21 mi away · pop. 1,170Pine Crest, TN
22 mi away · pop. 2,633
Other home services in Jellico
Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Tennessee climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.