Key takeaways
- Typical cost in Selmer: $7,600–$17,800 (for a 2,000 sq ft home); national range $8,500–$20,000.
- Biggest local factors: high humidity, hail and severe storms & high wind.
- How long it takes: Installation time depends on home size and material; finalize quotes about 3 months ahead.
- Permits: Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections.
- Best timing: Fall and early winter often bring lower labor costs.
- Before you hire: get at least three written, itemized quotes from licensed, insured Tennessee contractors.
How much does siding replacement cost in Selmer, TN?
Siding replacement for a typical 2,000 sq ft home costs $8,500–$20,000, with an average around $14,500. Material choice is the biggest price driver. Tennessee prices run 11% below the U.S. average, so a typical Selmer job lands around $7,600–$17,800. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost (per sq ft installed) | Notes |
|---|---|---|
| Vinyl | $3–$12 | Most common |
| Fiber cement | $5–$14 | Durable, fire resistant |
| Engineered wood | $2–$10 | |
| Wood | $2–$15 | Needs regular repainting or stain |
| Steel | $4–$16 | |
| Aluminum | $3–$10 | |
| Stucco | $7–$17 |
In a smaller community like Selmer, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Siding Replacement cost questions for Selmer, TN
- What is the cost of vinyl in Selmer, TN? The typical cost of vinyl in Selmer, TN is $0–$10 (typical cost per sq ft installed), adjusted for Tennessee prices (national $3–$12). Most common.
- What is the cost of fiber cement in Selmer, TN? The typical cost of fiber cement in Selmer, TN is $0–$10 (typical cost per sq ft installed), adjusted for Tennessee prices (national $5–$14). Durable, fire resistant.
- What is the cost of engineered wood in Selmer, TN? The typical cost of engineered wood in Selmer, TN is $0–$10 (typical cost per sq ft installed), adjusted for Tennessee prices (national $2–$10).
- What is the cost of wood in Selmer, TN? The typical cost of wood in Selmer, TN is $0–$10 (typical cost per sq ft installed), adjusted for Tennessee prices (national $2–$15). Needs regular repainting or stain.
- What is the cost of steel in Selmer, TN? The typical cost of steel in Selmer, TN is $0–$10 (typical cost per sq ft installed), adjusted for Tennessee prices (national $4–$16).
- What is the cost of aluminum in Selmer, TN? The typical cost of aluminum in Selmer, TN is $0–$10 (typical cost per sq ft installed), adjusted for Tennessee prices (national $3–$10).
- What is the cost of stucco in Selmer, TN? The typical cost of stucco in Selmer, TN is $10–$20 (typical cost per sq ft installed), adjusted for Tennessee prices (national $7–$17).
- What is the cost of brick veneer in Selmer, TN? The typical cost of brick veneer in Selmer, TN is $10–$20 (typical cost per sq ft installed), adjusted for Tennessee prices (national $8–$21).
- What is the cost of stone veneer in Selmer, TN? The typical cost of stone veneer in Selmer, TN is $0–$10 (typical cost per sq ft installed), adjusted for Tennessee prices (national $5–$11).
- What is the cost of labor in Selmer, TN? The typical cost of labor in Selmer, TN is $0–$0 per sq ft (typical cost per sq ft installed), adjusted for Tennessee prices (national $1–$4 per sq ft). $1,800–$8,000 for an average home.
What affects siding replacement in Selmer
Selmer has humid summers and cool-to-cold winters. Fall and early winter often bring lower labor costs.
Signs you need new siding
- Damage spread across large areas
- Repair costs approaching half the cost of replacement
- Rot or moisture problems behind panels
- Cracked, warped or missing panels
- New indoor drafts
- Fresh water stains on interior walls
Common questions about siding replacement in Selmer
How much does siding replacement cost in Selmer, TN?
Residing a typical 2,000 sq ft home costs about $7,600–$17,800 in Selmer, TN, or roughly $3–$15 per square foot installed.
How much does siding cost per square foot?
Installed prices run about $3–$12 for vinyl, $5–$14 for fiber cement, $2–$10 for engineered wood and $7–$17 for stucco.
Fiber cement or vinyl siding?
Fiber cement costs more but lasts 30–50 years versus 20–40 for vinyl, and it resists fire better.
How much does it cost to remove old siding?
Removing old siding typically costs $1,000–$2,500.
Timeline, permits and DIY in Selmer
How long it takes
Installation time depends on home size and material; finalize quotes about 3 months ahead.
Permits
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Check with the Selmer building department for local rules.
DIY or hire a pro?
Hire a pro: installation errors can trap moisture and void warranties.
Questions to ask Selmer contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Does the quote include tear-off, house wrap and trim?
- Are you certified by the siding manufacturer?
- How will you handle rot found under old siding?
- What workmanship warranty do you offer?
Maintenance that prevents costly repairs
- Wash siding once a year
- Recaulk gaps around windows and trim
- Repaint or restain wood siding on schedule
How to hire for siding replacement in Selmer
- Get three itemized quotes covering material, trim, wrap and removal.
- Ask whether the installer is certified by the siding manufacturer.
- Confirm permit and inspection costs are included.
- Get workmanship and product warranties in writing.
Siding Replacement in Selmer: FAQs
How much does siding replacement cost in Selmer, TN?
Nationally, residing a 2,000 sq ft home costs about $8,500–$20,000. Material and local labor rates set the final price.
What siding holds up best to hail in Selmer?
Impact-resistant materials like fiber cement tend to hold up better than thin vinyl or aluminum.
Does homeowners insurance cover siding damage in Selmer?
Sudden storm or hail damage is often covered, minus your deductible; wear and age aren't.
How much does siding replacement cost in Selmer compared to the national average?
With Tennessee's regional cost index of 0.89, expect roughly $7,600–$17,800 in Selmer, versus $8,500–$20,000 nationally.
How long does siding replacement take in Selmer?
Installation time depends on home size and material; finalize quotes about 3 months ahead. Permit and inspection scheduling in Selmer can add a few days.
Do I need a permit for siding replacement in Selmer?
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Confirm with the Selmer or county building department.
Which Selmer ZIP codes does this guide cover?
This guide applies to Selmer ZIP codes 38061, 38315, 38339, 38357, 38367, 38375, 38393, plus the surrounding area.
Siding Replacement near Selmer
33 mi away · pop. 66,975Adamsville, TN
12 mi away · pop. 2,239Crump, TN
16 mi away · pop. 1,400Corinth, MS
17 mi away · pop. 14,866Farmington, MS
18 mi away · pop. 2,194Henderson, TN
19 mi away · pop. 6,552Savannah, TN
20 mi away · pop. 7,027Olivet, TN
22 mi away · pop. 1,350Bolivar, TN
23 mi away · pop. 5,093
Other home services in Selmer
Sources: Fixr — House siding cost · Angi — What is siding · Angi — Siding installation and repair. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Tennessee climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.