Gutter Installation · Highlands, TX

Gutter Installation & Replacement in Highlands, TX: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Highlands typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Texas prices, plan on roughly $550–$1,500. In Highlands, the biggest local factors are hail, severe storms & high wind and long, hot cooling season.

Key takeaways

  • Typical cost in Highlands: $550–$1,500 (per installation); national range $622–$1,677.
  • Biggest local factors: hail, severe storms & high wind and long, hot cooling season.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before the rainy season and storm season.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Texas contractors.

How much does gutter installation cost in Highlands, TX?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Texas prices run 11% below the U.S. average, so a typical Highlands job lands around $550–$1,500. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Highlands, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Highlands, TX

  • What is the cost of vinyl in Highlands, TX? The typical cost of vinyl in Highlands, TX is $0–$10 per linear foot, adjusted for Texas prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Highlands, TX? The typical cost of aluminum in Highlands, TX is $0–$10 per linear foot, adjusted for Texas prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Highlands, TX? The typical cost of galvanized steel in Highlands, TX is $10–$10 per linear foot, adjusted for Texas prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Highlands, TX? The typical cost of stainless steel in Highlands, TX is $10–$20 per linear foot, adjusted for Texas prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Highlands, TX? The typical cost of zinc in Highlands, TX is $10–$30 per linear foot, adjusted for Texas prices (national $10–$29 per linear foot).
  • What is the cost of copper in Highlands, TX? The typical cost of copper in Highlands, TX is $20–$40+ per linear foot, adjusted for Texas prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Highlands, TX? The typical cost of seamless gutter system in Highlands, TX is $710–$4,500 total, adjusted for Texas prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Highlands, TX? The typical cost of downspouts in Highlands, TX is $0–$10 per foot, adjusted for Texas prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Highlands, TX? The typical cost of gutter guards in Highlands, TX is $10–$10 per linear foot, adjusted for Texas prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Highlands, TX? The typical cost of old gutter removal in Highlands, TX is $0.58–$0.76 per linear foot, adjusted for Texas prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Highlands

HailHail around Highlands dents aluminum gutters.
Severe storms & high windHigh winds around Highlands can pull loose gutter sections off the fascia.
Long, hot cooling seasonExtreme heat around Highlands can stress galvanized gutters and seams.

Highlands has hot, humid summers and mild winters. Install before the rainy season and storm season.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Highlands

How much does gutter installation cost in Highlands, TX?

Most gutter installations cost about $550–$1,500 in Highlands, TX, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Highlands

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Highlands building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Highlands contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Highlands

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Highlands: FAQs

How much do new gutters cost in Highlands, TX?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Highlands?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

How much does gutter installation cost in Highlands compared to the national average?

With Texas's regional cost index of 0.89, expect roughly $550–$1,500 in Highlands, versus $622–$1,677 nationally.

How long does gutter installation take in Highlands?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Highlands can add a few days.

Do I need a permit for gutter installation in Highlands?

Some areas require a permit for gutter installation; check locally. Confirm with the Highlands or county building department.

Which Highlands ZIP codes does this guide cover?

This guide applies to Highlands ZIP codes 77562, plus the surrounding area.

Gutter Installation near Highlands

Baytown, TX
7 mi away · pop. 76,335Barrett, TX
4 mi away · pop. 3,199Channelview, TX
5 mi away · pop. 38,289Sheldon, TX
6 mi away · pop. 1,990Crosby, TX
6 mi away · pop. 2,299Cloverleaf, TX
7 mi away · pop. 22,942Deer Park, TX
9 mi away · pop. 33,806Mont Belvieu, TX
10 mi away · pop. 5,193La Porte, TX
11 mi away · pop. 35,148

Other home services in Highlands

HVACAC, furnace and heat pump repair, replacement and costs$6,200–$10,700RoofingRoof replacement, leak repair, hail damage and insurance$6,000–$22,300Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$8,900–$62,300Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$5,900–$16,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,100–$4,800Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,600–$34,100Mold RemediationMold removal, testing, costs and insurance$1,300–$4,500Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$600Foundation RepairCracks, settling, piers, slab repair and costs$1,900–$7,000Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$780–$1,600Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,200–$4,700Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$560–$3,900Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,200–$2,700Window ReplacementNew window costs by type, frame material and installation method$270–$1,900Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,600–$17,800Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,500–$2,200

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Texas climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.