Attic Insulation · Keene, TX

Attic Insulation in Keene, TX: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Attic insulation in Keene typically costs about $1,700–$2,500 nationally, or roughly $1–$3 per square foot of attic floor. Adjusted for Texas prices, plan on roughly $1,500–$2,200. In Keene, the biggest local factors are long, hot cooling season and high humidity.

Key takeaways

  • Typical cost in Keene: $1,500–$2,200 (per attic); national range $1,700–$2,500.
  • Biggest local factors: long, hot cooling season and high humidity.
  • How long it takes: Blowing in insulation for a 1,000 sq ft attic can take a few hours; larger jobs take up to two days.
  • Permits: Insulation rarely needs a permit, but local codes set minimum R-values.
  • Best timing: Insulate in spring before peak cooling season; attics are cooler to work in.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Texas contractors.

How much does attic insulation cost in Keene, TX?

Attic insulation typically costs $1,700–$2,500, with an average around $2,100. Insulation type, attic size and removal of old material drive the price. Texas prices run 11% below the U.S. average, so a typical Keene job lands around $1,500–$2,200. Local labor rates, permit fees and your home's specifics move the final number.

Type / itemTypical cost (per sq ft installed)Notes
Blown-in (fiberglass or cellulose)$1–$4Fills gaps well
Batts or rolls$2–$4DIY-friendly
Loose-fill$2–$5
Spray foam$2–$5Also air-seals
Radiant barrier$0.50–$2Best in hot climates
Structural insulated panels$4–$7
Old insulation removal$1–$1.50If wet, moldy or pest-damaged

In a smaller community like Keene, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Attic Insulation cost questions for Keene, TX

  • What is the cost of blown-in (fiberglass or cellulose) in Keene, TX? The typical cost of blown-in (fiberglass or cellulose) in Keene, TX is $0–$0 (typical cost per sq ft installed), adjusted for Texas prices (national $1–$4). Fills gaps well.
  • What is the cost of batts or rolls in Keene, TX? The typical cost of batts or rolls in Keene, TX is $0–$0 (typical cost per sq ft installed), adjusted for Texas prices (national $2–$4). DIY-friendly.
  • What is the cost of loose-fill in Keene, TX? The typical cost of loose-fill in Keene, TX is $0–$0 (typical cost per sq ft installed), adjusted for Texas prices (national $2–$5).
  • What is the cost of spray foam in Keene, TX? The typical cost of spray foam in Keene, TX is $0–$0 (typical cost per sq ft installed), adjusted for Texas prices (national $2–$5). Also air-seals.
  • What is the cost of radiant barrier in Keene, TX? The typical cost of radiant barrier in Keene, TX is $0.45–$0 (typical cost per sq ft installed), adjusted for Texas prices (national $0.50–$2). Best in hot climates.
  • What is the cost of structural insulated panels in Keene, TX? The typical cost of structural insulated panels in Keene, TX is $0–$10 (typical cost per sq ft installed), adjusted for Texas prices (national $4–$7).
  • What is the cost of old insulation removal in Keene, TX? The typical cost of old insulation removal in Keene, TX is $0–$1.33 (typical cost per sq ft installed), adjusted for Texas prices (national $1–$1.50). If wet, moldy or pest-damaged.
  • What is the cost of air sealing in Keene, TX? The typical cost of air sealing in Keene, TX is $220–$670 per project (typical cost per sq ft installed), adjusted for Texas prices (national $250–$750 per project). Often done first.
  • What is the cost of 1,000 sq ft attic in Keene, TX? The typical cost of 1,000 sq ft attic in Keene, TX is $890–$2,700 total (typical cost per sq ft installed), adjusted for Texas prices (national $1,000–$3,000 total).

What affects attic insulation in Keene

Long, hot cooling seasonHot summers in Keene make attic insulation and radiant barriers effective at cutting cooling costs.
High humidityHumidity around Keene can dampen insulation; wet fiberglass or cellulose can grow mold, so fix leaks and ventilate.

Keene has hot, humid summers and mild winters. Insulate in spring before peak cooling season; attics are cooler to work in.

Signs you need more attic insulation

  • Insulation sits below the top of the floor joists
  • High heating or cooling bills
  • Ice dams or large icicles in winter
  • Uneven room temperatures or drafts
  • Compacted, wet or animal-damaged insulation

Common questions about attic insulation in Keene

How much does attic insulation cost in Keene, TX?

Most attic insulation projects cost about $1,500–$2,200 in Keene, TX, or roughly $1–$3 per square foot of attic floor nationally.

How much attic insulation do I need?

ENERGY STAR recommends about R30 in the hottest climate zone, R49 in zones 2–3 and R60 in zones 4–8 for an uninsulated attic.

How much does it cost to remove old attic insulation?

Removal typically costs $1–$1.50 per square foot and is only needed if insulation is wet, moldy or pest-damaged.

Is spray foam attic insulation worth it?

Spray foam ($2–$5/sq ft) also air-seals, which can help efficiency, but blown-in or batts cost less for a simple top-up.

Timeline, permits and DIY in Keene

How long it takes

Blowing in insulation for a 1,000 sq ft attic can take a few hours; larger jobs take up to two days.

Permits

Insulation rarely needs a permit, but local codes set minimum R-values. Check with the Keene building department for local rules.

DIY or hire a pro?

Batts are DIY-friendly; blown-in and spray foam are best left to pros, and test old loose-fill for asbestos.

Questions to ask Keene contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • What R-value will I have when you're done?
  • Is air sealing included?
  • How will you keep vents and soffits clear?
  • Will you remove damaged insulation first?

Maintenance that prevents costly repairs

  • Check insulation depth every few years
  • Keep soffit vents clear
  • Fix roof leaks fast to keep insulation dry

How to hire for attic insulation in Keene

  1. Ask what R-value the quote will achieve.
  2. Confirm air sealing is included or quoted separately.
  3. Ask how they'll handle old, damaged insulation.
  4. Check for utility or state rebates before you sign.

Attic Insulation in Keene: FAQs

How much does attic insulation cost in Keene, TX?

Nationally, most attic insulation projects cost $1,700–$2,500, about $1–$3 per square foot.

What R-value do I need in Keene?

ENERGY STAR recommends R30 to R60 depending on climate zone; check the Keene building code for local minimums.

How much does attic insulation cost in Keene compared to the national average?

With Texas's regional cost index of 0.89, expect roughly $1,500–$2,200 in Keene, versus $1,700–$2,500 nationally.

How long does attic insulation take in Keene?

Blowing in insulation for a 1,000 sq ft attic can take a few hours; larger jobs take up to two days. Permit and inspection scheduling in Keene can add a few days.

Do I need a permit for attic insulation in Keene?

Insulation rarely needs a permit, but local codes set minimum R-values. Confirm with the Keene or county building department.

Which Keene ZIP codes does this guide cover?

This guide applies to Keene ZIP codes 76059, plus the surrounding area.

Attic Insulation near Keene

Mansfield, TX
16 mi away · pop. 64,274Cleburne, TX
5 mi away · pop. 30,020Joshua, TX
6 mi away · pop. 6,066Alvarado, TX
7 mi away · pop. 4,015Burleson, TX
10 mi away · pop. 43,625Grandview, TX
12 mi away · pop. 1,615Godley, TX
12 mi away · pop. 1,069Crowley, TX
13 mi away · pop. 14,853Venus, TX
13 mi away · pop. 3,297

Other home services in Keene

HVACAC, furnace and heat pump repair, replacement and costs$6,200–$10,700RoofingRoof replacement, leak repair, hail damage and insurance$6,000–$22,300Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$8,900–$62,300Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$5,900–$16,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,100–$4,800Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,600–$34,100Mold RemediationMold removal, testing, costs and insurance$1,300–$4,500Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$600Foundation RepairCracks, settling, piers, slab repair and costs$1,900–$7,000Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$780–$1,600Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,200–$4,700Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$560–$3,900Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,200–$2,700Window ReplacementNew window costs by type, frame material and installation method$270–$1,900Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,600–$17,800Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$550–$1,500

Sources: HomeAdvisor — Attic insulation cost · Bob Vila — Attic insulation cost · ENERGY STAR — Recommended home insulation R-values. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Texas climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.