Gutter Installation · Montague, TX

Gutter Installation & Replacement in Montague, TX: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Montague typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Texas prices, plan on roughly $550–$1,500. In Montague, the biggest local factors are hail, severe storms & high wind and long, hot cooling season.

Key takeaways

  • Typical cost in Montague: $550–$1,500 (per installation); national range $622–$1,677.
  • Biggest local factors: hail, severe storms & high wind and long, hot cooling season.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before the rainy season and storm season.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Texas contractors.

How much does gutter installation cost in Montague, TX?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Texas prices run 11% below the U.S. average, so a typical Montague job lands around $550–$1,500. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Montague, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Montague, TX

  • What is the cost of vinyl in Montague, TX? The typical cost of vinyl in Montague, TX is $0–$10 per linear foot, adjusted for Texas prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Montague, TX? The typical cost of aluminum in Montague, TX is $0–$10 per linear foot, adjusted for Texas prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Montague, TX? The typical cost of galvanized steel in Montague, TX is $10–$10 per linear foot, adjusted for Texas prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Montague, TX? The typical cost of stainless steel in Montague, TX is $10–$20 per linear foot, adjusted for Texas prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Montague, TX? The typical cost of zinc in Montague, TX is $10–$30 per linear foot, adjusted for Texas prices (national $10–$29 per linear foot).
  • What is the cost of copper in Montague, TX? The typical cost of copper in Montague, TX is $20–$40+ per linear foot, adjusted for Texas prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Montague, TX? The typical cost of seamless gutter system in Montague, TX is $710–$4,500 total, adjusted for Texas prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Montague, TX? The typical cost of downspouts in Montague, TX is $0–$10 per foot, adjusted for Texas prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Montague, TX? The typical cost of gutter guards in Montague, TX is $10–$10 per linear foot, adjusted for Texas prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Montague, TX? The typical cost of old gutter removal in Montague, TX is $0.58–$0.76 per linear foot, adjusted for Texas prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Montague

HailHail around Montague dents aluminum gutters.
Severe storms & high windHigh winds around Montague can pull loose gutter sections off the fascia.
Long, hot cooling seasonExtreme heat around Montague can stress galvanized gutters and seams.

Montague has hot, humid summers and mild winters. Install before the rainy season and storm season.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Montague

How much does gutter installation cost in Montague, TX?

Most gutter installations cost about $550–$1,500 in Montague, TX, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Montague

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Montague building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Montague contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Montague

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Montague: FAQs

How much do new gutters cost in Montague, TX?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Montague?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

How much does gutter installation cost in Montague compared to the national average?

With Texas's regional cost index of 0.89, expect roughly $550–$1,500 in Montague, versus $622–$1,677 nationally.

How long does gutter installation take in Montague?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Montague can add a few days.

Do I need a permit for gutter installation in Montague?

Some areas require a permit for gutter installation; check locally. Confirm with the Montague or county building department.

Which Montague ZIP codes does this guide cover?

This guide applies to Montague ZIP codes 76251, plus the surrounding area.

Gutter Installation near Montague

Nocona, TX
8 mi away · pop. 2,939Bowie, TX
10 mi away · pop. 5,126Saint Jo, TX
12 mi away · pop. 1,043Muenster, TX
20 mi away · pop. 1,608Alvord, TX
21 mi away · pop. 1,403Chico, TX
26 mi away · pop. 1,069Lindsay, TX
29 mi away · pop. 1,078Henrietta, TX
29 mi away · pop. 3,014Decatur, TX
31 mi away · pop. 6,521

Other home services in Montague

HVACAC, furnace and heat pump repair, replacement and costs$6,200–$10,700RoofingRoof replacement, leak repair, hail damage and insurance$6,000–$22,300Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$8,900–$62,300Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$5,900–$16,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,100–$4,800Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,600–$34,100Mold RemediationMold removal, testing, costs and insurance$1,300–$4,500Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$600Foundation RepairCracks, settling, piers, slab repair and costs$1,900–$7,000Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$780–$1,600Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,200–$4,700Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$560–$3,900Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,200–$2,700Window ReplacementNew window costs by type, frame material and installation method$270–$1,900Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,600–$17,800Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,500–$2,200

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Texas climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.