Key takeaways
- Typical cost in Pembroke: $580–$1,600 (per installation); national range $622–$1,677.
- Biggest local factors: hard freezes and severe storms & high wind.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Late summer and early fall are ideal, before leaves drop.
- Before you hire: get at least three written, itemized quotes from licensed, insured Virginia contractors.
How much does gutter installation cost in Pembroke, VA?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Virginia prices run 6% below the U.S. average, so a typical Pembroke job lands around $580–$1,600. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
In a smaller community like Pembroke, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Pembroke, VA
- What is the cost of vinyl in Pembroke, VA? The typical cost of vinyl in Pembroke, VA is $0–$10 per linear foot, adjusted for Virginia prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Pembroke, VA? The typical cost of aluminum in Pembroke, VA is $0–$10 per linear foot, adjusted for Virginia prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Pembroke, VA? The typical cost of galvanized steel in Pembroke, VA is $10–$10 per linear foot, adjusted for Virginia prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Pembroke, VA? The typical cost of stainless steel in Pembroke, VA is $10–$20 per linear foot, adjusted for Virginia prices (national $9–$20 per linear foot).
- What is the cost of zinc in Pembroke, VA? The typical cost of zinc in Pembroke, VA is $10–$30 per linear foot, adjusted for Virginia prices (national $10–$29 per linear foot).
- What is the cost of copper in Pembroke, VA? The typical cost of copper in Pembroke, VA is $20–$40+ per linear foot, adjusted for Virginia prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Pembroke, VA? The typical cost of seamless gutter system in Pembroke, VA is $750–$4,700 total, adjusted for Virginia prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Pembroke, VA? The typical cost of downspouts in Pembroke, VA is $0–$10 per foot, adjusted for Virginia prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Pembroke, VA? The typical cost of gutter guards in Pembroke, VA is $10–$10 per linear foot, adjusted for Virginia prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Pembroke, VA? The typical cost of old gutter removal in Pembroke, VA is $0.61–$0.80 per linear foot, adjusted for Virginia prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Pembroke
Pembroke has humid summers and cool-to-cold winters. Late summer and early fall are ideal, before leaves drop.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Pembroke
How much does gutter installation cost in Pembroke, VA?
Most gutter installations cost about $580–$1,600 in Pembroke, VA, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Pembroke
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Pembroke building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Pembroke contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Pembroke
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Pembroke: FAQs
How much do new gutters cost in Pembroke, VA?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Pembroke?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
How much does gutter installation cost in Pembroke compared to the national average?
With Virginia's regional cost index of 0.94, expect roughly $580–$1,600 in Pembroke, versus $622–$1,677 nationally.
How long does gutter installation take in Pembroke?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Pembroke can add a few days.
Do I need a permit for gutter installation in Pembroke?
Some areas require a permit for gutter installation; check locally. Confirm with the Pembroke or county building department.
Which Pembroke ZIP codes does this guide cover?
This guide applies to Pembroke ZIP codes 24086, 24136, 24150, plus the surrounding area.
Gutter Installation near Pembroke
5 mi away · pop. 2,678Prices Fork, VA
11 mi away · pop. 1,066Fairlawn, VA
12 mi away · pop. 2,367Radford, VA
13 mi away · pop. 17,403Blacksburg, VA
14 mi away · pop. 44,215Merrimac, VA
15 mi away · pop. 2,133Dublin, VA
15 mi away · pop. 2,686Plum Creek, VA
15 mi away · pop. 1,524Christiansburg, VA
18 mi away · pop. 21,943
Other home services in Pembroke
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Virginia climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.