Electrical Panel Upgrade · Burien, WA

Electrical Panel Upgrade in Burien, WA: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

An electrical panel upgrade in Burien typically costs about $1,300–$3,000 nationally, with 100-to-200-amp upgrades in the same range. Adjusted for Washington prices, plan on roughly $1,400–$3,200. In Burien, the biggest local factors are flooding and high humidity.

Key takeaways

  • Typical cost in Burien: $1,400–$3,200 (per installed panel); national range $1,300–$3,000.
  • Biggest local factors: flooding and high humidity.
  • How long it takes: Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.
  • Permits: A permit is required, typically $50–$300; the electrician usually pulls it.
  • Best timing: Any season works; schedule with the utility in advance.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Washington contractors.

How much does electrical panel upgrade cost in Burien, WA?

An electrical panel upgrade typically costs $1,300–$3,000, with an average around $2,150. Amperage, meter and service changes, and subpanels drive the price. Washington prices run 8% above the U.S. average, so a typical Burien job lands around $1,400–$3,200. Local labor rates, permit fees and your home's specifics move the final number.

ItemTypical costNotes
100-amp panel installed$800–$1,500
150-amp panel installed$1,300–$1,600
200-amp panel / 100→200 amp upgrade$1,300–$3,000
400-amp service$2,000–$4,000
Meter box$200–$800Must match the new service
Subpanel$400–$1,750
Permit$50–$300Electrician usually pulls it

Burien is big enough to have a solid pool of local contractors, and many regional companies also serve the area, so getting three quotes is easy.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Electrical Panel Upgrade cost questions for Burien, WA

  • What is the cost of 100-amp panel installed in Burien, WA? The typical cost of 100-amp panel installed in Burien, WA is $860–$1,600, adjusted for Washington prices (national $800–$1,500).
  • What is the cost of 150-amp panel installed in Burien, WA? The typical cost of 150-amp panel installed in Burien, WA is $1,400–$1,700, adjusted for Washington prices (national $1,300–$1,600).
  • What is the cost of 200-amp panel / 100→200 amp upgrade in Burien, WA? The typical cost of 200-amp panel / 100→200 amp upgrade in Burien, WA is $1,400–$3,200, adjusted for Washington prices (national $1,300–$3,000).
  • What is the cost of 400-amp service in Burien, WA? The typical cost of 400-amp service in Burien, WA is $2,200–$4,300, adjusted for Washington prices (national $2,000–$4,000).
  • What is the cost of meter box in Burien, WA? The typical cost of meter box in Burien, WA is $220–$860, adjusted for Washington prices (national $200–$800). Must match the new service.
  • What is the cost of subpanel in Burien, WA? The typical cost of subpanel in Burien, WA is $430–$1,900, adjusted for Washington prices (national $400–$1,750).
  • What is the cost of permit in Burien, WA? The typical cost of permit in Burien, WA is $50–$320, adjusted for Washington prices (national $50–$300). Electrician usually pulls it.
  • What is the cost of move the panel in Burien, WA? The typical cost of move the panel in Burien, WA is $860–$3,200, adjusted for Washington prices (national $800–$3,000).
  • What is the cost of main breaker replacement in Burien, WA? The typical cost of main breaker replacement in Burien, WA is $220–$320, adjusted for Washington prices (national $200–$300). $500–$2,000 if the bus bar is damaged.
  • What is the cost of AFCI/GFCI breakers in Burien, WA? The typical cost of AFCI/GFCI breakers in Burien, WA is $40–$60 each, adjusted for Washington prices (national $35–$60 each). Often required by code.

What affects electrical panel upgrade in Burien

FloodingPanels that have been underwater in Burien floods must be replaced, not dried out.
High humidityHumid air around Burien can corrode panels; rust is a common upgrade sign.

Burien has a mild, wet marine climate. Any season works; schedule with the utility in advance.

Signs you need a panel upgrade

  • Breakers trip often
  • Lights flicker or dim when appliances run
  • You rely on power strips or can't run appliances together
  • The panel buzzes, feels hot or smells burnt
  • Rust or visible damage
  • A Federal Pacific or Zinsco panel, or plans for an EV charger or heat pump

Common questions about electrical panel upgrade in Burien

How much does an electrical panel upgrade cost in Burien, WA?

Most panel upgrades cost about $1,400–$3,200 in Burien, WA. A 100-to-200-amp upgrade typically runs $1,300–$3,000 nationally.

Do I need a 200 amp panel?

Most modern homes with central air, electric appliances or an EV charger are planned around 200 amps. A load calculation tells you for sure.

Is a Federal Pacific or Zinsco panel dangerous?

Both are widely flagged as outdated, and many electricians recommend replacing them.

How much does a subpanel cost?

A subpanel typically costs $400–$1,750 installed and can add circuits for a garage, addition or EV charger.

Timeline, permits and DIY in Burien

How long it takes

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling.

Permits

A permit is required, typically $50–$300; the electrician usually pulls it. Check with the Burien building department for local rules.

DIY or hire a pro?

Not a DIY job: a licensed electrician must do the work and coordinate with the utility.

Questions to ask Burien contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Did you do a load calculation for my home?
  • Does the quote include the meter, permit and utility coordination?
  • Which breakers will be AFCI or GFCI to meet code?
  • Will the power be off, and for how long?

Maintenance that prevents costly repairs

  • Have the panel inspected if breakers trip often
  • Never ignore buzzing or burning smells
  • Label circuits clearly

How to hire for electrical panel upgrade in Burien

  1. Use a licensed, insured electrician.
  2. Ask for a load calculation to size the new service.
  3. Confirm the permit, inspection and utility coordination are included.
  4. Get the warranty for parts and labor in writing.

Electrical Panel Upgrade in Burien: FAQs

How much does an electrical panel upgrade cost in Burien, WA?

Nationally, most upgrades cost $1,300–$3,000. Local permit fees and utility requirements change the final price.

Do I need a permit for a panel upgrade in Burien?

Yes. A licensed electrician typically pulls the permit and coordinates with the utility.

Will I need a panel upgrade to add a heat pump in Burien?

Possibly. Ask for a load calculation; many older homes need 200-amp service for heat pumps and EV chargers.

How much does electrical panel upgrade cost in Burien compared to the national average?

With Washington's regional cost index of 1.08, expect roughly $1,400–$3,200 in Burien, versus $1,300–$3,000 nationally.

How long does electrical panel upgrade take in Burien?

Most panel upgrades take about 4–8 hours of labor, plus utility scheduling. Permit and inspection scheduling in Burien can add a few days.

Do I need a permit for electrical panel upgrade in Burien?

A permit is required, typically $50–$300; the electrician usually pulls it. Confirm with the Burien or county building department.

Which Burien ZIP codes does this guide cover?

This guide applies to Burien ZIP codes 98062, plus the surrounding area.

Electrical Panel Upgrade near Burien

Renton, WA
6 mi away · pop. 100,242Boulevard Park, WA
2 mi away · pop. 5,287Normandy Park, WA
2 mi away · pop. 6,668Riverton, WA
3 mi away · pop. 6,407SeaTac, WA
3 mi away · pop. 28,215White Center, WA
3 mi away · pop. 13,495Tukwila, WA
4 mi away · pop. 20,018Des Moines, WA
5 mi away · pop. 31,221Bryn Mawr-Skyway, WA
5 mi away · pop. 15,645

Other home services in Burien

HVACAC, furnace and heat pump repair, replacement and costs$7,600–$13,000RoofingRoof replacement, leak repair, hail damage and insurance$7,200–$27,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,800–$75,600Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$7,100–$19,400Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,400–$5,800Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,100–$41,400Mold RemediationMold removal, testing, costs and insurance$1,600–$5,400Garage Door RepairSprings, cables, openers, off-track doors and costs$90–$730Foundation RepairCracks, settling, piers, slab repair and costs$2,400–$8,500Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$950–$2,000Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,500–$5,700Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$680–$4,800Window ReplacementNew window costs by type, frame material and installation method$320–$2,300Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$9,200–$21,600Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$670–$1,800Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,800–$2,700

Sources: This Old House — Cost to upgrade an electrical panel · Angi — Cost to upgrade an electrical panel. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Washington climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.