Key takeaways
- Typical cost in Five Corners: $670–$1,800 (per installation); national range $622–$1,677.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Late summer and early fall are ideal, before leaves drop.
- Before you hire: get at least three written, itemized quotes from licensed, insured Washington contractors.
How much does gutter installation cost in Five Corners, WA?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Washington prices run 8% above the U.S. average, so a typical Five Corners job lands around $670–$1,800. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
In a smaller community like Five Corners, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Five Corners, WA
- What is the cost of vinyl in Five Corners, WA? The typical cost of vinyl in Five Corners, WA is $0–$10 per linear foot, adjusted for Washington prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Five Corners, WA? The typical cost of aluminum in Five Corners, WA is $0–$20 per linear foot, adjusted for Washington prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Five Corners, WA? The typical cost of galvanized steel in Five Corners, WA is $10–$20 per linear foot, adjusted for Washington prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Five Corners, WA? The typical cost of stainless steel in Five Corners, WA is $10–$20 per linear foot, adjusted for Washington prices (national $9–$20 per linear foot).
- What is the cost of zinc in Five Corners, WA? The typical cost of zinc in Five Corners, WA is $10–$30 per linear foot, adjusted for Washington prices (national $10–$29 per linear foot).
- What is the cost of copper in Five Corners, WA? The typical cost of copper in Five Corners, WA is $30–$40+ per linear foot, adjusted for Washington prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Five Corners, WA? The typical cost of seamless gutter system in Five Corners, WA is $860–$5,400 total, adjusted for Washington prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Five Corners, WA? The typical cost of downspouts in Five Corners, WA is $10–$10 per foot, adjusted for Washington prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Five Corners, WA? The typical cost of gutter guards in Five Corners, WA is $10–$10 per linear foot, adjusted for Washington prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Five Corners, WA? The typical cost of old gutter removal in Five Corners, WA is $0.70–$0.92 per linear foot, adjusted for Washington prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Five Corners
Five Corners doesn't face an unusual climate hazard for this work, so price and timing mostly come down to your home's size, age and the materials you choose.
Five Corners has a mild, wet marine climate. Late summer and early fall are ideal, before leaves drop.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Five Corners
How much does gutter installation cost in Five Corners, WA?
Most gutter installations cost about $670–$1,800 in Five Corners, WA, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Five Corners
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Five Corners building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Five Corners contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Five Corners
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Five Corners: FAQs
How much do new gutters cost in Five Corners, WA?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Five Corners?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
How much does gutter installation cost in Five Corners compared to the national average?
With Washington's regional cost index of 1.08, expect roughly $670–$1,800 in Five Corners, versus $622–$1,677 nationally.
How long does gutter installation take in Five Corners?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Five Corners can add a few days.
Do I need a permit for gutter installation in Five Corners?
Some areas require a permit for gutter installation; check locally. Confirm with the Five Corners or county building department.
Gutter Installation near Five Corners
1 mi away · pop. 5,661Orchards, WA
1 mi away · pop. 19,556Walnut Grove, WA
2 mi away · pop. 9,790Brush Prairie, WA
4 mi away · pop. 2,652Minnehaha, WA
4 mi away · pop. 9,771Salmon Creek, WA
4 mi away · pop. 19,686Hazel Dell, WA
4 mi away · pop. 19,435Mount Vista, WA
4 mi away · pop. 7,850Mill Plain, WA
5 mi away · pop. 7,874
Other home services in Five Corners
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Washington climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.