Key takeaways
- Typical cost in Lynnwood: $670–$1,800 (per installation); national range $622–$1,677.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Late summer and early fall are ideal, before leaves drop.
- Before you hire: get at least three written, itemized quotes from licensed, insured Washington contractors.
How much does gutter installation cost in Lynnwood, WA?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Washington prices run 8% above the U.S. average, so a typical Lynnwood job lands around $670–$1,800. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
In a smaller community like Lynnwood, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Lynnwood, WA
- What is the cost of vinyl in Lynnwood, WA? The typical cost of vinyl in Lynnwood, WA is $0–$10 per linear foot, adjusted for Washington prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Lynnwood, WA? The typical cost of aluminum in Lynnwood, WA is $0–$20 per linear foot, adjusted for Washington prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Lynnwood, WA? The typical cost of galvanized steel in Lynnwood, WA is $10–$20 per linear foot, adjusted for Washington prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Lynnwood, WA? The typical cost of stainless steel in Lynnwood, WA is $10–$20 per linear foot, adjusted for Washington prices (national $9–$20 per linear foot).
- What is the cost of zinc in Lynnwood, WA? The typical cost of zinc in Lynnwood, WA is $10–$30 per linear foot, adjusted for Washington prices (national $10–$29 per linear foot).
- What is the cost of copper in Lynnwood, WA? The typical cost of copper in Lynnwood, WA is $30–$40+ per linear foot, adjusted for Washington prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Lynnwood, WA? The typical cost of seamless gutter system in Lynnwood, WA is $860–$5,400 total, adjusted for Washington prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Lynnwood, WA? The typical cost of downspouts in Lynnwood, WA is $10–$10 per foot, adjusted for Washington prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Lynnwood, WA? The typical cost of gutter guards in Lynnwood, WA is $10–$10 per linear foot, adjusted for Washington prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Lynnwood, WA? The typical cost of old gutter removal in Lynnwood, WA is $0.70–$0.92 per linear foot, adjusted for Washington prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Lynnwood
Lynnwood doesn't face an unusual climate hazard for this work, so price and timing mostly come down to your home's size, age and the materials you choose.
Lynnwood has a mild, wet marine climate. Late summer and early fall are ideal, before leaves drop.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Lynnwood
How much does gutter installation cost in Lynnwood, WA?
Most gutter installations cost about $670–$1,800 in Lynnwood, WA, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Lynnwood
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Lynnwood building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Lynnwood contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Lynnwood
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Lynnwood: FAQs
How much do new gutters cost in Lynnwood, WA?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Lynnwood?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
How much does gutter installation cost in Lynnwood compared to the national average?
With Washington's regional cost index of 1.08, expect roughly $670–$1,800 in Lynnwood, versus $622–$1,677 nationally.
How long does gutter installation take in Lynnwood?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Lynnwood can add a few days.
Do I need a permit for gutter installation in Lynnwood?
Some areas require a permit for gutter installation; check locally. Confirm with the Lynnwood or county building department.
Which Lynnwood ZIP codes does this guide cover?
This guide applies to Lynnwood ZIP codes 98036, 98037, 98046, 98087, plus the surrounding area.
Gutter Installation near Lynnwood
2 mi away · pop. 8,442Mountlake Terrace, WA
2 mi away · pop. 20,989Meadowdale, WA
2 mi away · pop. 2,826Esperance, WA
3 mi away · pop. 3,601Edmonds, WA
3 mi away · pop. 41,375Picnic Point-North Lynnwood, WA
3 mi away · pop. 22,953Brier, WA
3 mi away · pop. 6,656Larch Way, WA
3 mi away · pop. 3,318Woodway, WA
4 mi away · pop. 1,364
Other home services in Lynnwood
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Washington climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.