Sewer Line Repair & Replacement · Marietta, WA

Sewer Line Repair & Replacement in Marietta, WA: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Sewer line repair or replacement in Marietta typically costs about $1,388–$5,323 nationally, or $50–$250 per linear foot for replacement. Adjusted for Washington prices, plan on roughly $1,500–$5,700. In Marietta, the biggest local factors are earthquakes.

Key takeaways

  • Typical cost in Marietta: $1,500–$5,700 (per project); national range $1,388–$5,323.
  • Biggest local factors: earthquakes.
  • How long it takes: Trenchless methods are generally faster than open-trench replacement; spot repairs are often done in a day.
  • Permits: All sewer line projects require a permit, typically $100–$1,000.
  • Best timing: Any season works; avoid the rainiest weeks for open-trench work.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Washington contractors.

How much does sewer line repair cost in Marietta, WA?

Sewer line repair and replacement typically costs $1,388–$5,323, with an average around $3,319. Full replacement is priced by the foot, at $50–$250 per linear foot. Washington prices run 8% above the U.S. average, so a typical Marietta job lands around $1,500–$5,700. Local labor rates, permit fees and your home's specifics move the final number.

ItemTypical costNotes
Camera inspection$100–$500Most jobs start here
Cracked or broken pipe repair$600–$1,050Localized damage
Partial replacement$50–$250 per footCollapsed section
Traditional excavation replacement$50–$200 per footOpen trench
Pipe bursting (trenchless)$60–$200 per footPulls new pipe through old
Cured-in-place lining (trenchless)$90–$250 per footLines the existing pipe
Under-slab sectionAdds $300–$350 per footInside the foundation

In a smaller community like Marietta, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Sewer Line Repair & Replacement cost questions for Marietta, WA

  • What is the cost of camera inspection in Marietta, WA? The typical cost of camera inspection in Marietta, WA is $110–$540, adjusted for Washington prices (national $100–$500). Most jobs start here.
  • What is the cost of cracked or broken pipe repair in Marietta, WA? The typical cost of cracked or broken pipe repair in Marietta, WA is $650–$1,100, adjusted for Washington prices (national $600–$1,050). Localized damage.
  • What is the cost of partial replacement in Marietta, WA? The typical cost of partial replacement in Marietta, WA is $50–$270 per foot, adjusted for Washington prices (national $50–$250 per foot). Collapsed section.
  • What is the cost of traditional excavation replacement in Marietta, WA? The typical cost of traditional excavation replacement in Marietta, WA is $50–$220 per foot, adjusted for Washington prices (national $50–$200 per foot). Open trench.
  • What is the cost of pipe bursting (trenchless) in Marietta, WA? The typical cost of pipe bursting (trenchless) in Marietta, WA is $60–$220 per foot, adjusted for Washington prices (national $60–$200 per foot). Pulls new pipe through old.
  • What is the cost of cured-in-place lining (trenchless) in Marietta, WA? The typical cost of cured-in-place lining (trenchless) in Marietta, WA is $100–$270 per foot, adjusted for Washington prices (national $90–$250 per foot). Lines the existing pipe.
  • What is the cost of under-slab section in Marietta, WA? The typical cost of under-slab section in Marietta, WA is Adds $320–$380 per foot, adjusted for Washington prices (national Adds $300–$350 per foot). Inside the foundation.
  • What is the cost of root removal in Marietta, WA? The typical cost of root removal in Marietta, WA is $110–$650, adjusted for Washington prices (national $100–$600).
  • What is the cost of permit in Marietta, WA? The typical cost of permit in Marietta, WA is $110–$1,100, adjusted for Washington prices (national $100–$1,000). Varies by city.
  • What is the cost of landscaping restoration in Marietta, WA? The typical cost of landscaping restoration in Marietta, WA is $4.86–$10 per sq ft, adjusted for Washington prices (national $4.50–$12 per sq ft). After digging.

What affects sewer line repair in Marietta

EarthquakesGround movement in Marietta can crack sewer lines and separate joints.

Marietta has a mild, wet marine climate. Any season works; avoid the rainiest weeks for open-trench work.

Signs of a sewer line problem

  • Several slow or backed-up drains at once
  • Sewage odor in the yard or house
  • Soggy, extra-green or sunken strips in the yard
  • Recurring clogs
  • Gurgling or bubbling drains
  • New foundation cracks or pests

Common questions about sewer line repair in Marietta

How much does sewer line replacement cost in Marietta, WA?

Most sewer line projects cost about $1,500–$5,700 in Marietta, WA. Full replacement runs $50–$250 per linear foot depending on method.

Is trenchless sewer replacement worth it?

Often, when the yard, driveway or landscaping would be expensive to restore. Trenchless costs $60–$250 per foot versus $50–$200 for excavation.

How much does it cost to replace a sewer line under a slab?

Sections under the slab add about $300–$350 per foot because crews must cut and restore concrete.

Who pays for the sewer line to the street?

Homeowners usually own the lateral from the house to the main or property line; the city typically owns the main. Rules vary, so check locally.

Timeline, permits and DIY in Marietta

How long it takes

Trenchless methods are generally faster than open-trench replacement; spot repairs are often done in a day.

Permits

All sewer line projects require a permit, typically $100–$1,000. Check with the Marietta building department for local rules.

DIY or hire a pro?

Not a DIY job: sewer work needs specialized equipment, correct slope and an inspected permit.

Questions to ask Marietta contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Can I see the camera inspection video?
  • Is a spot repair or lining an option instead of full replacement?
  • Is landscaping and driveway restoration included?
  • What warranty covers the new line?

Maintenance that prevents costly repairs

  • Don't flush wipes or grease
  • Have roots cleared before they block the line
  • Camera-inspect older lines when buying a home

How to hire for sewer line repair in Marietta

  1. Start with a camera inspection and ask for a copy of the video.
  2. Get at least two quotes comparing trenchless and excavation.
  3. Confirm the plumber pulls the permit and schedules inspection.
  4. Ask whether landscaping and hardscape restoration is included.

Sewer Line Repair & Replacement in Marietta: FAQs

How much does sewer line replacement cost in Marietta, WA?

Nationally, projects typically cost $1,388–$5,323, or $50–$250 per foot for replacement. Local depth, permits and access change the price.

Who is responsible for the sewer line in Marietta?

Homeowners usually own the lateral from the house to the city main or property line. Check with the Marietta utility for where your responsibility ends.

Do I need a permit for sewer work in Marietta?

Yes. Sewer line repairs and replacements require a permit; your plumber typically pulls it.

How much does sewer line repair cost in Marietta compared to the national average?

With Washington's regional cost index of 1.08, expect roughly $1,500–$5,700 in Marietta, versus $1,388–$5,323 nationally.

How long does sewer line repair take in Marietta?

Trenchless methods are generally faster than open-trench replacement; spot repairs are often done in a day. Permit and inspection scheduling in Marietta can add a few days.

Do I need a permit for sewer line repair in Marietta?

All sewer line projects require a permit, typically $100–$1,000. Confirm with the Marietta or county building department.

Which Marietta ZIP codes does this guide cover?

This guide applies to Marietta ZIP codes 98262, plus the surrounding area.

Sewer Line Repair & Replacement near Marietta

Bellingham, WA
5 mi away · pop. 85,146Marietta-Alderwood, WA
1 mi away · pop. 3,906Ferndale, WA
4 mi away · pop. 13,010Geneva, WA
9 mi away · pop. 2,321Sudden Valley, WA
12 mi away · pop. 6,441Birch Bay, WA
12 mi away · pop. 8,413Lynden, WA
12 mi away · pop. 13,517Everson, WA
14 mi away · pop. 2,600Nooksack, WA
15 mi away · pop. 1,480

Other home services in Marietta

HVACAC, furnace and heat pump repair, replacement and costs$7,600–$13,000RoofingRoof replacement, leak repair, hail damage and insurance$7,200–$27,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,800–$75,600Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$7,100–$19,400Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,400–$5,800Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,100–$41,400Mold RemediationMold removal, testing, costs and insurance$1,600–$5,400Garage Door RepairSprings, cables, openers, off-track doors and costs$90–$730Foundation RepairCracks, settling, piers, slab repair and costs$2,400–$8,500Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$950–$2,000Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$680–$4,800Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,400–$3,200Window ReplacementNew window costs by type, frame material and installation method$320–$2,300Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$9,200–$21,600Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$670–$1,800Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,800–$2,700

Sources: HomeAdvisor — Sewer line repair and replacement cost · This Old House — Sewer line replacement cost · HomeServe — Trenchless sewer line repair cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Washington climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.