Key takeaways
- Typical cost in Port Angeles: $9,200–$21,600 (for a 2,000 sq ft home); national range $8,500–$20,000.
- Biggest local factors: wildfire and high humidity.
- How long it takes: Installation time depends on home size and material; finalize quotes about 3 months ahead.
- Permits: Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections.
- Best timing: Fall and early winter often bring lower labor costs.
- Before you hire: get at least three written, itemized quotes from licensed, insured Washington contractors.
How much does siding replacement cost in Port Angeles, WA?
Siding replacement for a typical 2,000 sq ft home costs $8,500–$20,000, with an average around $14,500. Material choice is the biggest price driver. Washington prices run 8% above the U.S. average, so a typical Port Angeles job lands around $9,200–$21,600. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost (per sq ft installed) | Notes |
|---|---|---|
| Vinyl | $3–$12 | Most common |
| Fiber cement | $5–$14 | Durable, fire resistant |
| Engineered wood | $2–$10 | |
| Wood | $2–$15 | Needs regular repainting or stain |
| Steel | $4–$16 | |
| Aluminum | $3–$10 | |
| Stucco | $7–$17 |
In a smaller community like Port Angeles, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Siding Replacement cost questions for Port Angeles, WA
- What is the cost of vinyl in Port Angeles, WA? The typical cost of vinyl in Port Angeles, WA is $0–$10 (typical cost per sq ft installed), adjusted for Washington prices (national $3–$12). Most common.
- What is the cost of fiber cement in Port Angeles, WA? The typical cost of fiber cement in Port Angeles, WA is $10–$20 (typical cost per sq ft installed), adjusted for Washington prices (national $5–$14). Durable, fire resistant.
- What is the cost of engineered wood in Port Angeles, WA? The typical cost of engineered wood in Port Angeles, WA is $0–$10 (typical cost per sq ft installed), adjusted for Washington prices (national $2–$10).
- What is the cost of wood in Port Angeles, WA? The typical cost of wood in Port Angeles, WA is $0–$20 (typical cost per sq ft installed), adjusted for Washington prices (national $2–$15). Needs regular repainting or stain.
- What is the cost of steel in Port Angeles, WA? The typical cost of steel in Port Angeles, WA is $0–$20 (typical cost per sq ft installed), adjusted for Washington prices (national $4–$16).
- What is the cost of aluminum in Port Angeles, WA? The typical cost of aluminum in Port Angeles, WA is $0–$10 (typical cost per sq ft installed), adjusted for Washington prices (national $3–$10).
- What is the cost of stucco in Port Angeles, WA? The typical cost of stucco in Port Angeles, WA is $10–$20 (typical cost per sq ft installed), adjusted for Washington prices (national $7–$17).
- What is the cost of brick veneer in Port Angeles, WA? The typical cost of brick veneer in Port Angeles, WA is $10–$20 (typical cost per sq ft installed), adjusted for Washington prices (national $8–$21).
- What is the cost of stone veneer in Port Angeles, WA? The typical cost of stone veneer in Port Angeles, WA is $10–$10 (typical cost per sq ft installed), adjusted for Washington prices (national $5–$11).
- What is the cost of labor in Port Angeles, WA? The typical cost of labor in Port Angeles, WA is $0–$0 per sq ft (typical cost per sq ft installed), adjusted for Washington prices (national $1–$4 per sq ft). $1,800–$8,000 for an average home.
What affects siding replacement in Port Angeles
Port Angeles has a mild, wet marine climate. Fall and early winter often bring lower labor costs.
Signs you need new siding
- Damage spread across large areas
- Repair costs approaching half the cost of replacement
- Rot or moisture problems behind panels
- Cracked, warped or missing panels
- New indoor drafts
- Fresh water stains on interior walls
Common questions about siding replacement in Port Angeles
How much does siding replacement cost in Port Angeles, WA?
Residing a typical 2,000 sq ft home costs about $9,200–$21,600 in Port Angeles, WA, or roughly $3–$15 per square foot installed.
How much does siding cost per square foot?
Installed prices run about $3–$12 for vinyl, $5–$14 for fiber cement, $2–$10 for engineered wood and $7–$17 for stucco.
Fiber cement or vinyl siding?
Fiber cement costs more but lasts 30–50 years versus 20–40 for vinyl, and it resists fire better.
How much does it cost to remove old siding?
Removing old siding typically costs $1,000–$2,500.
Timeline, permits and DIY in Port Angeles
How long it takes
Installation time depends on home size and material; finalize quotes about 3 months ahead.
Permits
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Check with the Port Angeles building department for local rules.
DIY or hire a pro?
Hire a pro: installation errors can trap moisture and void warranties.
Questions to ask Port Angeles contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Does the quote include tear-off, house wrap and trim?
- Are you certified by the siding manufacturer?
- How will you handle rot found under old siding?
- What workmanship warranty do you offer?
Maintenance that prevents costly repairs
- Wash siding once a year
- Recaulk gaps around windows and trim
- Repaint or restain wood siding on schedule
How to hire for siding replacement in Port Angeles
- Get three itemized quotes covering material, trim, wrap and removal.
- Ask whether the installer is certified by the siding manufacturer.
- Confirm permit and inspection costs are included.
- Get workmanship and product warranties in writing.
Siding Replacement in Port Angeles: FAQs
How much does siding replacement cost in Port Angeles, WA?
Nationally, residing a 2,000 sq ft home costs about $8,500–$20,000. Material and local labor rates set the final price.
Does homeowners insurance cover siding damage in Port Angeles?
Sudden storm or hail damage is often covered, minus your deductible; wear and age aren't.
How much does siding replacement cost in Port Angeles compared to the national average?
With Washington's regional cost index of 1.08, expect roughly $9,200–$21,600 in Port Angeles, versus $8,500–$20,000 nationally.
How long does siding replacement take in Port Angeles?
Installation time depends on home size and material; finalize quotes about 3 months ahead. Permit and inspection scheduling in Port Angeles can add a few days.
Do I need a permit for siding replacement in Port Angeles?
Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Confirm with the Port Angeles or county building department.
Which Port Angeles ZIP codes does this guide cover?
This guide applies to Port Angeles ZIP codes 98343, 98362, 98363, plus the surrounding area.
Siding Replacement near Port Angeles
3 mi away · pop. 3,036Sequim, WA
15 mi away · pop. 6,826Port Hadlock-Irondale, WA
30 mi away · pop. 3,580Port Townsend, WA
31 mi away · pop. 9,335Friday Harbor, WA
34 mi away · pop. 2,340Coupeville, WA
35 mi away · pop. 1,887Port Ludlow, WA
37 mi away · pop. 2,603Ault Field, WA
38 mi away · pop. 1,541Oak Harbor, WA
38 mi away · pop. 22,693
Other home services in Port Angeles
Sources: Fixr — House siding cost · Angi — What is siding · Angi — Siding installation and repair. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Washington climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.