Key takeaways
- Typical cost in Spokane: $670–$1,800 (per installation); national range $622–$1,677.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Late summer and early fall are ideal, before leaves drop.
- Before you hire: get at least three written, itemized quotes from licensed, insured Washington contractors.
How much does gutter installation cost in Spokane, WA?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Washington prices run 8% above the U.S. average, so a typical Spokane job lands around $670–$1,800. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
Spokane is big enough to have a solid pool of local contractors, and many regional companies also serve the area, so getting three quotes is easy.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Spokane, WA
- What is the cost of vinyl in Spokane, WA? The typical cost of vinyl in Spokane, WA is $0–$10 per linear foot, adjusted for Washington prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Spokane, WA? The typical cost of aluminum in Spokane, WA is $0–$20 per linear foot, adjusted for Washington prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Spokane, WA? The typical cost of galvanized steel in Spokane, WA is $10–$20 per linear foot, adjusted for Washington prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Spokane, WA? The typical cost of stainless steel in Spokane, WA is $10–$20 per linear foot, adjusted for Washington prices (national $9–$20 per linear foot).
- What is the cost of zinc in Spokane, WA? The typical cost of zinc in Spokane, WA is $10–$30 per linear foot, adjusted for Washington prices (national $10–$29 per linear foot).
- What is the cost of copper in Spokane, WA? The typical cost of copper in Spokane, WA is $30–$40+ per linear foot, adjusted for Washington prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Spokane, WA? The typical cost of seamless gutter system in Spokane, WA is $860–$5,400 total, adjusted for Washington prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Spokane, WA? The typical cost of downspouts in Spokane, WA is $10–$10 per foot, adjusted for Washington prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Spokane, WA? The typical cost of gutter guards in Spokane, WA is $10–$10 per linear foot, adjusted for Washington prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Spokane, WA? The typical cost of old gutter removal in Spokane, WA is $0.70–$0.92 per linear foot, adjusted for Washington prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Spokane
Spokane doesn't face an unusual climate hazard for this work, so price and timing mostly come down to your home's size, age and the materials you choose.
Spokane has a mild, wet marine climate. Late summer and early fall are ideal, before leaves drop.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Spokane
How much does gutter installation cost in Spokane, WA?
Most gutter installations cost about $670–$1,800 in Spokane, WA, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Spokane
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Spokane building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Spokane contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Spokane
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Spokane: FAQs
How much do new gutters cost in Spokane, WA?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Spokane?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
How much does gutter installation cost in Spokane compared to the national average?
With Washington's regional cost index of 1.08, expect roughly $670–$1,800 in Spokane, versus $622–$1,677 nationally.
How long does gutter installation take in Spokane?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Spokane can add a few days.
Do I need a permit for gutter installation in Spokane?
Some areas require a permit for gutter installation; check locally. Confirm with the Spokane or county building department.
Which Spokane ZIP codes does this guide cover?
This guide applies to Spokane ZIP codes 99201, 99202, 99203, 99204, 99205, 99206, 99207, 99208, 99209, 99210, 99211, 99212, 99213, 99214, 99215, 99216, 99217, 99218, 99219, 99220, 99223, 99224, 99228, 99251, 99252 and more, plus the surrounding area.
Gutter Installation near Spokane
9 mi away · pop. 94,919Town and Country, WA
5 mi away · pop. 4,857Country Homes, WA
6 mi away · pop. 5,841Millwood, WA
7 mi away · pop. 1,783Airway Heights, WA
8 mi away · pop. 6,639Mead, WA
8 mi away · pop. 7,275Fairchild Air Force Base, WA
11 mi away · pop. 2,776Medical Lake, WA
13 mi away · pop. 4,942Cheney, WA
14 mi away · pop. 11,534
Other home services in Spokane
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Washington climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.