Fire Damage Restoration · Kewaskum, WI

Fire & Smoke Damage Restoration in Kewaskum, WI: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Fire and smoke damage restoration in Kewaskum averages about $20,470, with most jobs costing $2,900–$38,325. Adjusted for Wisconsin prices, plan on roughly $2,900–$38,300. In Kewaskum, the biggest local factors are long heating season.

Key takeaways

  • Typical cost in Kewaskum: $2,900–$38,300 (per typical job); national range $2,900–$38,325.
  • Biggest local factors: long heating season.
  • How long it takes: Small kitchen fires can be cleaned in days.
  • Permits: Structural, electrical and HVAC repairs after a fire require permits and inspections.
  • Best timing: Have chimneys swept and heating equipment inspected each fall.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Wisconsin contractors.

How much does fire and smoke damage restoration cost in Kewaskum, WI?

Fire damage restoration averages about $20,470, with most jobs costing $2,900–$38,325. Small kitchen fires with smoke damage sit at the low end; structural fires that need rebuilding and water cleanup from firefighting cost far more. Wisconsin prices run at the U.S. average, so a typical Kewaskum job lands around $2,900–$38,300. Local labor rates, permit fees and your home's specifics move the final number.

JobTypical costNotes
Fire and smoke restoration (overall)$2,900–$38,325National average about $20,470
Per square foot$4.25–$6.50Whole-home cleaning and restoration
Smoke damage/odor removal$200–$1,135Varies by size and severity
Thermal fogging$200–$585Neutralizes odor in cavities
Ozone treatment$235–$465Home must be vacant during treatment
Dry soot cleanup$400–$700Fast-burning paper/wood fires
Oily soot cleanup$1,000+Grease and plastic fires — harder to clean

In a smaller community like Kewaskum, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Fire Damage Restoration cost questions for Kewaskum, WI

  • What is the cost of fire and smoke restoration (overall) in Kewaskum, WI? The typical cost of fire and smoke restoration (overall) in Kewaskum, WI is $2,900–$38,325. National average about $20,470.
  • What is the cost of per square foot in Kewaskum, WI? The typical cost of per square foot in Kewaskum, WI is $4.25–$6.50. Whole-home cleaning and restoration.
  • What is the cost of smoke damage/odor removal in Kewaskum, WI? The typical cost of smoke damage/odor removal in Kewaskum, WI is $200–$1,135. Varies by size and severity.
  • What is the cost of thermal fogging in Kewaskum, WI? The typical cost of thermal fogging in Kewaskum, WI is $200–$585. Neutralizes odor in cavities.
  • What is the cost of ozone treatment in Kewaskum, WI? The typical cost of ozone treatment in Kewaskum, WI is $235–$465. Home must be vacant during treatment.
  • What is the cost of dry soot cleanup in Kewaskum, WI? The typical cost of dry soot cleanup in Kewaskum, WI is $400–$700. Fast-burning paper/wood fires.
  • What is the cost of oily soot cleanup in Kewaskum, WI? The typical cost of oily soot cleanup in Kewaskum, WI is $1,000+. Grease and plastic fires — harder to clean.
  • What is the cost of water damage from firefighting in Kewaskum, WI? The typical cost of water damage from firefighting in Kewaskum, WI is $1,270–$5,375. Extraction and drying.

What affects fire and smoke damage restoration in Kewaskum

Long heating seasonLong heating seasons in Kewaskum make heating equipment, space heaters and chimneys leading fire causes. Get chimneys swept and furnaces inspected each fall.

Kewaskum has long, very cold winters. Have chimneys swept and heating equipment inspected each fall.

What to do after a house fire

  1. Don't re-enter until the fire department says it's safe.
  2. Call your insurer to start a claim and ask about temporary housing.
  3. Secure the property — board-up and roof tarping prevent further damage and theft.
  4. Photograph and inventory damage before cleanup.
  5. Hire a fire restoration company to start soot and water mitigation quickly.
  6. Keep every receipt for living expenses.

Don't wipe soot with a damp cloth or run your HVAC — both can spread and set soot deeper.

Common questions about fire and smoke damage restoration in Kewaskum

How much does fire damage restoration cost in Kewaskum, WI?

Fire and smoke restoration typically costs about $2,900–$38,300 in Kewaskum, WI. Whole-home cleaning runs roughly $4.25–$6.50 per square foot nationally, and structural rebuilds cost more.

How long does fire damage restoration take?

A small kitchen fire can be cleaned in days. Major fires that need structural repairs take weeks to many months.

Can I stay in my house after a small fire?

Only after the fire department says it is safe. Soot and smoke residue can be hazardous, and most policies include additional living expenses (ALE) coverage for temporary housing.

Does homeowners insurance cover smoke damage?

Most standard policies cover fire and smoke damage, including smoke from nearby wildfires. Check your policy for exclusions and limits.

How do you get the smoke smell out of a house?

Clean every surface, replace HVAC filters and clean the ducts, then treat the odor with thermal fogging, ozone or hydroxyl generators. Heavy odor may need sealing primer on walls.

Should I clean soot myself?

It is not recommended. Soot is acidic and oily, and the wrong cleaner smears it deeper into surfaces. Professionals use dry sponges and specialized cleaners.

What is additional living expenses coverage?

ALE pays for temporary housing, meals and other extra costs while your home is uninhabitable after a covered loss.

What should I do in the first 24 hours after a house fire?

Get clearance to enter, call your insurer, secure the property with board-up and tarps, photograph damage and start a list of damaged belongings.

Timeline, permits and DIY in Kewaskum

How long it takes

Small kitchen fires can be cleaned in days. Major fires take several weeks to many months to rebuild.

Permits

Structural, electrical and HVAC repairs after a fire require permits and inspections. Check with the Kewaskum building department for local rules.

DIY or hire a pro?

Soot is acidic and can be toxic, so professional cleaning is the safe choice. You can photograph damage and list belongings for your claim.

Questions to ask Kewaskum contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Do you handle board-up, cleaning, contents and rebuild?
  • Will you work directly with my insurance adjuster?
  • How do you remove smoke odor: thermal fogging, ozone or hydroxyl?
  • Do you inventory and pack out contents?

Maintenance that prevents costly repairs

  • Test smoke alarms monthly
  • Clean the dryer vent once a year
  • Keep a fire extinguisher in the kitchen

How to hire for fire and smoke damage restoration in Kewaskum

  1. Look for IICRC fire and smoke restoration certification.
  2. Confirm 24/7 emergency board-up and tarping.
  3. Ask for a written scope separating cleaning, contents and rebuild.
  4. Make sure they document work for your insurer with photos and logs.
  5. Check licensing for rebuild work where Wisconsin requires it.

Fire Damage Restoration in Kewaskum: FAQs

How much does fire damage restoration cost in Kewaskum, WI?

Most Kewaskum fire restoration jobs cost $2,900–$38,325, with about $20,470 typical. Smoke-only cleanups cost less; structural fires and rebuilding cost more.

How quickly should fire restoration start in Kewaskum?

As soon as the fire department clears the home. Soot is acidic and can permanently stain surfaces within days, so start mitigation within 24–72 hours.

How much does fire and smoke damage restoration cost in Kewaskum compared to the national average?

With Wisconsin's regional cost index of 1.00, expect roughly $2,900–$38,300 in Kewaskum, versus $2,900–$38,325 nationally.

How long does fire and smoke damage restoration take in Kewaskum?

Small kitchen fires can be cleaned in days. Major fires take several weeks to many months to rebuild. Permit and inspection scheduling in Kewaskum can add a few days.

Do I need a permit for fire and smoke damage restoration in Kewaskum?

Structural, electrical and HVAC repairs after a fire require permits and inspections. Confirm with the Kewaskum or county building department.

Which Kewaskum ZIP codes does this guide cover?

This guide applies to Kewaskum ZIP codes 53040, plus the surrounding area.

Fire Damage Restoration near Kewaskum

Barton, WI
6 mi away · pop. 2,615Campbellsport, WI
6 mi away · pop. 1,978West Bend, WI
7 mi away · pop. 31,695Ashford, WI
8 mi away · pop. 1,725Addison, WI
10 mi away · pop. 3,439Newburg, WI
11 mi away · pop. 1,233Theresa, WI
11 mi away · pop. 1,213Lomira, WI
12 mi away · pop. 2,384Slinger, WI
13 mi away · pop. 5,208

Other home services in Kewaskum

HVACAC, furnace and heat pump repair, replacement and costs$7,000–$12,000RoofingRoof replacement, leak repair, hail damage and insurance$6,700–$25,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,000–$70,000Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,600–$18,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,400Mold RemediationMold removal, testing, costs and insurance$1,500–$5,000Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$680Foundation RepairCracks, settling, piers, slab repair and costs$2,200–$7,800Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$880–$1,800Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,400–$5,300Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$630–$4,400Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,300–$3,000Window ReplacementNew window costs by type, frame material and installation method$300–$2,100Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$8,500–$20,000Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$620–$1,700Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,700–$2,500

Sources: LawnStarter — Fire and smoke restoration cost (2026). Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Wisconsin climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.