Gutter Installation · Saint Francis, WI

Gutter Installation & Replacement in Saint Francis, WI: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Saint Francis typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Wisconsin prices, plan on roughly $620–$1,700. In Saint Francis, the biggest local factors are snow & ice, hard freezes and hail.

Key takeaways

  • Typical cost in Saint Francis: $620–$1,700 (per installation); national range $622–$1,677.
  • Biggest local factors: snow & ice, hard freezes and hail.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Wisconsin contractors.

How much does gutter installation cost in Saint Francis, WI?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Wisconsin prices run at the U.S. average, so a typical Saint Francis job lands around $620–$1,700. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

In a smaller community like Saint Francis, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Saint Francis, WI

  • What is the cost of vinyl in Saint Francis, WI? The typical cost of vinyl in Saint Francis, WI is $3–$6 per linear foot.
  • What is the cost of aluminum in Saint Francis, WI? The typical cost of aluminum in Saint Francis, WI is $4–$14 per linear foot. Dents easily.
  • What is the cost of galvanized steel in Saint Francis, WI? The typical cost of galvanized steel in Saint Francis, WI is $6–$14 per linear foot.
  • What is the cost of stainless steel in Saint Francis, WI? The typical cost of stainless steel in Saint Francis, WI is $9–$20 per linear foot.
  • What is the cost of zinc in Saint Francis, WI? The typical cost of zinc in Saint Francis, WI is $10–$29 per linear foot.
  • What is the cost of copper in Saint Francis, WI? The typical cost of copper in Saint Francis, WI is $25–$40+ per linear foot. Up to 50 years.
  • What is the cost of seamless gutter system in Saint Francis, WI? The typical cost of seamless gutter system in Saint Francis, WI is $800–$5,000 total. Cut on site.
  • What is the cost of downspouts in Saint Francis, WI? The typical cost of downspouts in Saint Francis, WI is $5–$12 per foot. Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Saint Francis, WI? The typical cost of gutter guards in Saint Francis, WI is $7–$12 per linear foot. Installed.
  • What is the cost of old gutter removal in Saint Francis, WI? The typical cost of old gutter removal in Saint Francis, WI is $0.65–$0.85 per linear foot. Extra stories add $1–$3/ft labor.

What affects gutter installation in Saint Francis

Snow & iceHeavy snow and ice around Saint Francis weigh on gutters and cause sagging; heat tape and strong hangers help.
Hard freezesIce dams in Saint Francis can tear gutters loose; good attic insulation reduces the problem.
HailHail around Saint Francis dents aluminum gutters.

Saint Francis has long, very cold winters. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Saint Francis

How much does gutter installation cost in Saint Francis, WI?

Most gutter installations cost about $620–$1,700 in Saint Francis, WI, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Saint Francis

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Saint Francis building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Saint Francis contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Saint Francis

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Saint Francis: FAQs

How much do new gutters cost in Saint Francis, WI?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Saint Francis?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Saint Francis compared to the national average?

With Wisconsin's regional cost index of 1.00, expect roughly $620–$1,700 in Saint Francis, versus $622–$1,677 nationally.

How long does gutter installation take in Saint Francis?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Saint Francis can add a few days.

Do I need a permit for gutter installation in Saint Francis?

Some areas require a permit for gutter installation; check locally. Confirm with the Saint Francis or county building department.

Which Saint Francis ZIP codes does this guide cover?

This guide applies to Saint Francis ZIP codes 53235, plus the surrounding area.

Gutter Installation near Saint Francis

Milwaukee, WI
5 mi away · pop. 600,155West Allis, WI
7 mi away · pop. 60,620Cudahy, WI
1 mi away · pop. 18,353South Milwaukee, WI
4 mi away · pop. 21,233Oak Creek, WI
6 mi away · pop. 35,243West Milwaukee, WI
6 mi away · pop. 4,212Greendale, WI
6 mi away · pop. 14,333Greenfield, WI
7 mi away · pop. 37,349Shorewood, WI
8 mi away · pop. 13,311

Other home services in Saint Francis

HVACAC, furnace and heat pump repair, replacement and costs$7,000–$12,000RoofingRoof replacement, leak repair, hail damage and insurance$6,700–$25,000Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,000–$70,000Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,600–$18,000Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,400Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,900–$38,300Mold RemediationMold removal, testing, costs and insurance$1,500–$5,000Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$680Foundation RepairCracks, settling, piers, slab repair and costs$2,200–$7,800Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$880–$1,800Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,400–$5,300Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$630–$4,400Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,300–$3,000Window ReplacementNew window costs by type, frame material and installation method$300–$2,100Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$8,500–$20,000Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,700–$2,500

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Wisconsin climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.