Gutter Installation · Minneapolis, MN

Gutter Installation & Replacement in Minneapolis, MN: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Gutter installation in Minneapolis typically costs about $622–$1,677 nationally, or roughly $4–$14 per linear foot for aluminum. Adjusted for Minnesota prices, plan on roughly $660–$1,800. In Minneapolis, the biggest local factors are snow & ice, hard freezes and hail.

Key takeaways

  • Typical cost in Minneapolis: $660–$1,800 (per installation); national range $622–$1,677.
  • Biggest local factors: snow & ice, hard freezes and hail.
  • How long it takes: A professional gutter installation typically takes 7–10 hours.
  • Permits: Some areas require a permit for gutter installation; check locally.
  • Best timing: Install before winter so gutters handle snowmelt and ice.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Minnesota contractors.

What Minneapolis homeowners should know

Minneapolis has one of the coldest climates of any major U.S. city, with long winters, heavy snow and deep frost. Ice dams, frozen pipes and furnace failures are the classic winter emergencies, while spring snowmelt and summer storms send water into basements.

Much of the city's housing dates from the early 1900s through the 1950s, with full basements, older boilers or furnaces and limited insulation. Summer hail is also common.

How much does gutter installation cost in Minneapolis, MN?

Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Minnesota prices run 6% above the U.S. average, so a typical Minneapolis job lands around $660–$1,800. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical costNotes
Vinyl$3–$6 per linear foot
Aluminum$4–$14 per linear footDents easily
Galvanized steel$6–$14 per linear foot
Stainless steel$9–$20 per linear foot
Zinc$10–$29 per linear foot
Copper$25–$40+ per linear footUp to 50 years
Seamless gutter system$800–$5,000 totalCut on site

As a large city, Minneapolis has plenty of contractors competing for work, which helps on price, but busy seasons can mean longer waits. Book early after major storms.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Gutter Installation cost questions for Minneapolis, MN

  • What is the cost of vinyl in Minneapolis, MN? The typical cost of vinyl in Minneapolis, MN is $0–$10 per linear foot, adjusted for Minnesota prices (national $3–$6 per linear foot).
  • What is the cost of aluminum in Minneapolis, MN? The typical cost of aluminum in Minneapolis, MN is $0–$10 per linear foot, adjusted for Minnesota prices (national $4–$14 per linear foot). Dents easily.
  • What is the cost of galvanized steel in Minneapolis, MN? The typical cost of galvanized steel in Minneapolis, MN is $10–$10 per linear foot, adjusted for Minnesota prices (national $6–$14 per linear foot).
  • What is the cost of stainless steel in Minneapolis, MN? The typical cost of stainless steel in Minneapolis, MN is $10–$20 per linear foot, adjusted for Minnesota prices (national $9–$20 per linear foot).
  • What is the cost of zinc in Minneapolis, MN? The typical cost of zinc in Minneapolis, MN is $10–$30 per linear foot, adjusted for Minnesota prices (national $10–$29 per linear foot).
  • What is the cost of copper in Minneapolis, MN? The typical cost of copper in Minneapolis, MN is $30–$40+ per linear foot, adjusted for Minnesota prices (national $25–$40+ per linear foot). Up to 50 years.
  • What is the cost of seamless gutter system in Minneapolis, MN? The typical cost of seamless gutter system in Minneapolis, MN is $850–$5,300 total, adjusted for Minnesota prices (national $800–$5,000 total). Cut on site.
  • What is the cost of downspouts in Minneapolis, MN? The typical cost of downspouts in Minneapolis, MN is $10–$10 per foot, adjusted for Minnesota prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
  • What is the cost of gutter guards in Minneapolis, MN? The typical cost of gutter guards in Minneapolis, MN is $10–$10 per linear foot, adjusted for Minnesota prices (national $7–$12 per linear foot). Installed.
  • What is the cost of old gutter removal in Minneapolis, MN? The typical cost of old gutter removal in Minneapolis, MN is $0.69–$0.90 per linear foot, adjusted for Minnesota prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.

What affects gutter installation in Minneapolis

Snow & iceHeavy snow and ice around Minneapolis weigh on gutters and cause sagging; heat tape and strong hangers help.
Hard freezesIce dams in Minneapolis can tear gutters loose; good attic insulation reduces the problem.
HailHail around Minneapolis dents aluminum gutters.

Minneapolis has long, very cold winters. Install before winter so gutters handle snowmelt and ice.

Signs you need new gutters

  • Holes, cracks or rust
  • Sagging or pulling away from the house
  • Water pooling at the foundation or a wet basement
  • Peeling exterior paint
  • Rotting window or door frames
  • Eroded landscaping beneath the gutters

Common questions about gutter installation in Minneapolis

How much does gutter installation cost in Minneapolis, MN?

Most gutter installations cost about $660–$1,800 in Minneapolis, MN, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.

How much do gutters cost per foot?

Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.

Are seamless gutters worth it?

Usually. They cost more but have fewer joints that can leak.

How much do gutter guards cost?

About $7–$12 per linear foot installed.

Timeline, permits and DIY in Minneapolis

How long it takes

A professional gutter installation typically takes 7–10 hours.

Permits

Some areas require a permit for gutter installation; check locally. Check with the Minneapolis building department for local rules.

DIY or hire a pro?

Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.

Questions to ask Minneapolis contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Are the gutters seamless, and what gauge is the metal?
  • How many downspouts, and where will they discharge?
  • Is removal of the old gutters included?
  • What warranty covers leaks and sagging?

Maintenance that prevents costly repairs

  • Clean gutters in spring and fall
  • Check that downspouts drain away from the foundation
  • Tighten loose hangers

How to hire for gutter installation in Minneapolis

  1. Ask for seamless gutter quotes with downspout count and placement.
  2. Confirm hanger type and spacing.
  3. Ask whether old gutter removal and disposal is included.
  4. Get the workmanship warranty in writing.

Gutter Installation in Minneapolis: FAQs

How much do new gutters cost in Minneapolis, MN?

Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.

Do I need gutter guards in Minneapolis?

Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.

What gutters work best in snowy areas?

Heavier-gauge metal gutters with strong hangers handle snow and ice best.

How much does gutter installation cost in Minneapolis compared to the national average?

With Minnesota's regional cost index of 1.06, expect roughly $660–$1,800 in Minneapolis, versus $622–$1,677 nationally.

How long does gutter installation take in Minneapolis?

A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Minneapolis can add a few days.

Do I need a permit for gutter installation in Minneapolis?

Some areas require a permit for gutter installation; check locally. Confirm with the Minneapolis or county building department.

Which Minneapolis ZIP codes does this guide cover?

This guide applies to Minneapolis ZIP codes 55401, 55402, 55403, 55404, 55405, 55406, 55407, 55408, 55409, 55410, 55411, 55412, 55413, 55414, 55415, 55416, 55417, 55418, 55419, 55420, 55421, 55422, 55423, 55424, 55425 and more, plus the surrounding area.

Gutter Installation near Minneapolis

Lauderdale, MN
3 mi away · pop. 2,506Saint Anthony, MN
4 mi away · pop. 8,226Columbia Heights, MN
4 mi away · pop. 19,715Golden Valley, MN
5 mi away · pop. 21,270Saint Louis Park, MN
5 mi away · pop. 45,250Falcon Heights, MN
5 mi away · pop. 5,571Robbinsdale, MN
5 mi away · pop. 14,418Roseville, MN
6 mi away · pop. 35,580Crystal, MN
6 mi away · pop. 22,943

Other home services in Minneapolis

HVACAC, furnace and heat pump repair, replacement and costs$7,400–$12,700RoofingRoof replacement, leak repair, hail damage and insurance$7,100–$26,500Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,600–$74,200Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$7,000–$19,100Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,700Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,100–$40,600Mold RemediationMold removal, testing, costs and insurance$1,600–$5,300Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$720Foundation RepairCracks, settling, piers, slab repair and costs$2,300–$8,300Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$930–$1,900Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,500–$5,600Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$670–$4,700Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,400–$3,200Window ReplacementNew window costs by type, frame material and installation method$320–$2,200Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$9,000–$21,200Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,800–$2,700

Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Minnesota climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.