Siding Replacement · Minneapolis, MN

Siding Replacement in Minneapolis, MN: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Siding replacement in Minneapolis typically costs about $8,500–$20,000 for a 2,000 sq ft home nationally, or roughly $3–$15 per sq ft installed. Adjusted for Minnesota prices, plan on roughly $9,000–$21,200. In Minneapolis, the biggest local factors are hail, hard freezes and high humidity.

Key takeaways

  • Typical cost in Minneapolis: $9,000–$21,200 (for a 2,000 sq ft home); national range $8,500–$20,000.
  • Biggest local factors: hail, hard freezes and high humidity.
  • How long it takes: Installation time depends on home size and material; finalize quotes about 3 months ahead.
  • Permits: Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections.
  • Best timing: Plan for late spring through fall; fall quotes can be cheaper.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Minnesota contractors.

What Minneapolis homeowners should know

Minneapolis has one of the coldest climates of any major U.S. city, with long winters, heavy snow and deep frost. Ice dams, frozen pipes and furnace failures are the classic winter emergencies, while spring snowmelt and summer storms send water into basements.

Much of the city's housing dates from the early 1900s through the 1950s, with full basements, older boilers or furnaces and limited insulation. Summer hail is also common.

How much does siding replacement cost in Minneapolis, MN?

Siding replacement for a typical 2,000 sq ft home costs $8,500–$20,000, with an average around $14,500. Material choice is the biggest price driver. Minnesota prices run 6% above the U.S. average, so a typical Minneapolis job lands around $9,000–$21,200. Local labor rates, permit fees and your home's specifics move the final number.

Material / itemTypical cost (per sq ft installed)Notes
Vinyl$3–$12Most common
Fiber cement$5–$14Durable, fire resistant
Engineered wood$2–$10
Wood$2–$15Needs regular repainting or stain
Steel$4–$16
Aluminum$3–$10
Stucco$7–$17

As a large city, Minneapolis has plenty of contractors competing for work, which helps on price, but busy seasons can mean longer waits. Book early after major storms.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Siding Replacement cost questions for Minneapolis, MN

  • What is the cost of vinyl in Minneapolis, MN? The typical cost of vinyl in Minneapolis, MN is $0–$10 (typical cost per sq ft installed), adjusted for Minnesota prices (national $3–$12). Most common.
  • What is the cost of fiber cement in Minneapolis, MN? The typical cost of fiber cement in Minneapolis, MN is $10–$10 (typical cost per sq ft installed), adjusted for Minnesota prices (national $5–$14). Durable, fire resistant.
  • What is the cost of engineered wood in Minneapolis, MN? The typical cost of engineered wood in Minneapolis, MN is $0–$10 (typical cost per sq ft installed), adjusted for Minnesota prices (national $2–$10).
  • What is the cost of wood in Minneapolis, MN? The typical cost of wood in Minneapolis, MN is $0–$20 (typical cost per sq ft installed), adjusted for Minnesota prices (national $2–$15). Needs regular repainting or stain.
  • What is the cost of steel in Minneapolis, MN? The typical cost of steel in Minneapolis, MN is $0–$20 (typical cost per sq ft installed), adjusted for Minnesota prices (national $4–$16).
  • What is the cost of aluminum in Minneapolis, MN? The typical cost of aluminum in Minneapolis, MN is $0–$10 (typical cost per sq ft installed), adjusted for Minnesota prices (national $3–$10).
  • What is the cost of stucco in Minneapolis, MN? The typical cost of stucco in Minneapolis, MN is $10–$20 (typical cost per sq ft installed), adjusted for Minnesota prices (national $7–$17).
  • What is the cost of brick veneer in Minneapolis, MN? The typical cost of brick veneer in Minneapolis, MN is $10–$20 (typical cost per sq ft installed), adjusted for Minnesota prices (national $8–$21).
  • What is the cost of stone veneer in Minneapolis, MN? The typical cost of stone veneer in Minneapolis, MN is $10–$10 (typical cost per sq ft installed), adjusted for Minnesota prices (national $5–$11).
  • What is the cost of labor in Minneapolis, MN? The typical cost of labor in Minneapolis, MN is $0–$0 per sq ft (typical cost per sq ft installed), adjusted for Minnesota prices (national $1–$4 per sq ft). $1,800–$8,000 for an average home.

What affects siding replacement in Minneapolis

HailHail around Minneapolis dents metal siding and cracks vinyl, a common reason for insurance claims.
Hard freezesFreezing temperatures in Minneapolis make vinyl more brittle and prone to cracking on impact.
High humidityHumidity around Minneapolis can rot wood and engineered wood siding without regular upkeep.

Minneapolis has long, very cold winters. Plan for late spring through fall; fall quotes can be cheaper.

Signs you need new siding

  • Damage spread across large areas
  • Repair costs approaching half the cost of replacement
  • Rot or moisture problems behind panels
  • Cracked, warped or missing panels
  • New indoor drafts
  • Fresh water stains on interior walls

Common questions about siding replacement in Minneapolis

How much does siding replacement cost in Minneapolis, MN?

Residing a typical 2,000 sq ft home costs about $9,000–$21,200 in Minneapolis, MN, or roughly $3–$15 per square foot installed.

How much does siding cost per square foot?

Installed prices run about $3–$12 for vinyl, $5–$14 for fiber cement, $2–$10 for engineered wood and $7–$17 for stucco.

Fiber cement or vinyl siding?

Fiber cement costs more but lasts 30–50 years versus 20–40 for vinyl, and it resists fire better.

How much does it cost to remove old siding?

Removing old siding typically costs $1,000–$2,500.

Timeline, permits and DIY in Minneapolis

How long it takes

Installation time depends on home size and material; finalize quotes about 3 months ahead.

Permits

Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Check with the Minneapolis building department for local rules.

DIY or hire a pro?

Hire a pro: installation errors can trap moisture and void warranties.

Questions to ask Minneapolis contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • Does the quote include tear-off, house wrap and trim?
  • Are you certified by the siding manufacturer?
  • How will you handle rot found under old siding?
  • What workmanship warranty do you offer?

Maintenance that prevents costly repairs

  • Wash siding once a year
  • Recaulk gaps around windows and trim
  • Repaint or restain wood siding on schedule

How to hire for siding replacement in Minneapolis

  1. Get three itemized quotes covering material, trim, wrap and removal.
  2. Ask whether the installer is certified by the siding manufacturer.
  3. Confirm permit and inspection costs are included.
  4. Get workmanship and product warranties in writing.

Siding Replacement in Minneapolis: FAQs

How much does siding replacement cost in Minneapolis, MN?

Nationally, residing a 2,000 sq ft home costs about $8,500–$20,000. Material and local labor rates set the final price.

What siding holds up best to hail in Minneapolis?

Impact-resistant materials like fiber cement tend to hold up better than thin vinyl or aluminum.

Does homeowners insurance cover siding damage in Minneapolis?

Sudden storm or hail damage is often covered, minus your deductible; wear and age aren't.

How much does siding replacement cost in Minneapolis compared to the national average?

With Minnesota's regional cost index of 1.06, expect roughly $9,000–$21,200 in Minneapolis, versus $8,500–$20,000 nationally.

How long does siding replacement take in Minneapolis?

Installation time depends on home size and material; finalize quotes about 3 months ahead. Permit and inspection scheduling in Minneapolis can add a few days.

Do I need a permit for siding replacement in Minneapolis?

Siding replacement typically needs a permit; budget about $150–$1,500 for permits and inspections. Confirm with the Minneapolis or county building department.

Which Minneapolis ZIP codes does this guide cover?

This guide applies to Minneapolis ZIP codes 55401, 55402, 55403, 55404, 55405, 55406, 55407, 55408, 55409, 55410, 55411, 55412, 55413, 55414, 55415, 55416, 55417, 55418, 55419, 55420, 55421, 55422, 55423, 55424, 55425 and more, plus the surrounding area.

Siding Replacement near Minneapolis

Lauderdale, MN
3 mi away · pop. 2,506Saint Anthony, MN
4 mi away · pop. 8,226Columbia Heights, MN
4 mi away · pop. 19,715Golden Valley, MN
5 mi away · pop. 21,270Saint Louis Park, MN
5 mi away · pop. 45,250Falcon Heights, MN
5 mi away · pop. 5,571Robbinsdale, MN
5 mi away · pop. 14,418Roseville, MN
6 mi away · pop. 35,580Crystal, MN
6 mi away · pop. 22,943

Other home services in Minneapolis

HVACAC, furnace and heat pump repair, replacement and costs$7,400–$12,700RoofingRoof replacement, leak repair, hail damage and insurance$7,100–$26,500Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$10,600–$74,200Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$7,000–$19,100Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,300–$5,700Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$3,100–$40,600Mold RemediationMold removal, testing, costs and insurance$1,600–$5,300Garage Door RepairSprings, cables, openers, off-track doors and costs$80–$720Foundation RepairCracks, settling, piers, slab repair and costs$2,300–$8,300Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$930–$1,900Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,500–$5,600Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$670–$4,700Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,400–$3,200Window ReplacementNew window costs by type, frame material and installation method$320–$2,200Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$660–$1,800Attic InsulationAttic insulation costs by type, recommended R-values and when to add more$1,800–$2,700

Sources: Fixr — House siding cost · Angi — What is siding · Angi — Siding installation and repair. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Minnesota climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.