Attic Insulation · Murray, UT

Attic Insulation in Murray, UT: 2026 Costs & Local FAQs

Updated 2026-10-18 · Reviewed by the HomeServiceBud Editorial Team

Quick answer

Attic insulation in Murray typically costs about $1,700–$2,500 nationally, or roughly $1–$3 per square foot of attic floor. Adjusted for Utah prices, plan on roughly $1,600–$2,300. In Murray, the biggest local factors are snow & ice and long heating season.

Key takeaways

  • Typical cost in Murray: $1,600–$2,300 (per attic); national range $1,700–$2,500.
  • Biggest local factors: snow & ice and long heating season.
  • How long it takes: Blowing in insulation for a 1,000 sq ft attic can take a few hours; larger jobs take up to two days.
  • Permits: Insulation rarely needs a permit, but local codes set minimum R-values.
  • Best timing: Insulate in fall before heating season.
  • Before you hire: get at least three written, itemized quotes from licensed, insured Utah contractors.

How much does attic insulation cost in Murray, UT?

Attic insulation typically costs $1,700–$2,500, with an average around $2,100. Insulation type, attic size and removal of old material drive the price. Utah prices run 7% below the U.S. average, so a typical Murray job lands around $1,600–$2,300. Local labor rates, permit fees and your home's specifics move the final number.

Type / itemTypical cost (per sq ft installed)Notes
Blown-in (fiberglass or cellulose)$1–$4Fills gaps well
Batts or rolls$2–$4DIY-friendly
Loose-fill$2–$5
Spray foam$2–$5Also air-seals
Radiant barrier$0.50–$2Best in hot climates
Structural insulated panels$4–$7
Old insulation removal$1–$1.50If wet, moldy or pest-damaged

In a smaller community like Murray, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.

How we calculate costs

National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.

Attic Insulation cost questions for Murray, UT

  • What is the cost of blown-in (fiberglass or cellulose) in Murray, UT? The typical cost of blown-in (fiberglass or cellulose) in Murray, UT is $0–$0 (typical cost per sq ft installed), adjusted for Utah prices (national $1–$4). Fills gaps well.
  • What is the cost of batts or rolls in Murray, UT? The typical cost of batts or rolls in Murray, UT is $0–$0 (typical cost per sq ft installed), adjusted for Utah prices (national $2–$4). DIY-friendly.
  • What is the cost of loose-fill in Murray, UT? The typical cost of loose-fill in Murray, UT is $0–$0 (typical cost per sq ft installed), adjusted for Utah prices (national $2–$5).
  • What is the cost of spray foam in Murray, UT? The typical cost of spray foam in Murray, UT is $0–$0 (typical cost per sq ft installed), adjusted for Utah prices (national $2–$5). Also air-seals.
  • What is the cost of radiant barrier in Murray, UT? The typical cost of radiant barrier in Murray, UT is $0.47–$0 (typical cost per sq ft installed), adjusted for Utah prices (national $0.50–$2). Best in hot climates.
  • What is the cost of structural insulated panels in Murray, UT? The typical cost of structural insulated panels in Murray, UT is $0–$10 (typical cost per sq ft installed), adjusted for Utah prices (national $4–$7).
  • What is the cost of old insulation removal in Murray, UT? The typical cost of old insulation removal in Murray, UT is $0–$1.40 (typical cost per sq ft installed), adjusted for Utah prices (national $1–$1.50). If wet, moldy or pest-damaged.
  • What is the cost of air sealing in Murray, UT? The typical cost of air sealing in Murray, UT is $230–$700 per project (typical cost per sq ft installed), adjusted for Utah prices (national $250–$750 per project). Often done first.
  • What is the cost of 1,000 sq ft attic in Murray, UT? The typical cost of 1,000 sq ft attic in Murray, UT is $930–$2,800 total (typical cost per sq ft installed), adjusted for Utah prices (national $1,000–$3,000 total).

What affects attic insulation in Murray

Snow & iceIn snowy Murray winters, good attic insulation and air sealing prevent ice dams.
Long heating seasonLong, cold winters in Murray make high R-values pay off on heating bills.

Murray has cold, snowy winters and warm summers. Insulate in fall before heating season.

Signs you need more attic insulation

  • Insulation sits below the top of the floor joists
  • High heating or cooling bills
  • Ice dams or large icicles in winter
  • Uneven room temperatures or drafts
  • Compacted, wet or animal-damaged insulation

Common questions about attic insulation in Murray

How much does attic insulation cost in Murray, UT?

Most attic insulation projects cost about $1,600–$2,300 in Murray, UT, or roughly $1–$3 per square foot of attic floor nationally.

How much attic insulation do I need?

ENERGY STAR recommends about R30 in the hottest climate zone, R49 in zones 2–3 and R60 in zones 4–8 for an uninsulated attic.

How much does it cost to remove old attic insulation?

Removal typically costs $1–$1.50 per square foot and is only needed if insulation is wet, moldy or pest-damaged.

Is spray foam attic insulation worth it?

Spray foam ($2–$5/sq ft) also air-seals, which can help efficiency, but blown-in or batts cost less for a simple top-up.

Timeline, permits and DIY in Murray

How long it takes

Blowing in insulation for a 1,000 sq ft attic can take a few hours; larger jobs take up to two days.

Permits

Insulation rarely needs a permit, but local codes set minimum R-values. Check with the Murray building department for local rules.

DIY or hire a pro?

Batts are DIY-friendly; blown-in and spray foam are best left to pros, and test old loose-fill for asbestos.

Questions to ask Murray contractors

Ask every bidder the same questions so you can compare quotes apples to apples.

  • What R-value will I have when you're done?
  • Is air sealing included?
  • How will you keep vents and soffits clear?
  • Will you remove damaged insulation first?

Maintenance that prevents costly repairs

  • Check insulation depth every few years
  • Keep soffit vents clear
  • Fix roof leaks fast to keep insulation dry

How to hire for attic insulation in Murray

  1. Ask what R-value the quote will achieve.
  2. Confirm air sealing is included or quoted separately.
  3. Ask how they'll handle old, damaged insulation.
  4. Check for utility or state rebates before you sign.

Attic Insulation in Murray: FAQs

How much does attic insulation cost in Murray, UT?

Nationally, most attic insulation projects cost $1,700–$2,500, about $1–$3 per square foot.

What R-value do I need in Murray?

ENERGY STAR recommends R30 to R60 depending on climate zone; check the Murray building code for local minimums.

Does attic insulation prevent ice dams in Murray?

Yes, combined with air sealing and ventilation, it keeps attic heat from melting roof snow.

How much does attic insulation cost in Murray compared to the national average?

With Utah's regional cost index of 0.93, expect roughly $1,600–$2,300 in Murray, versus $1,700–$2,500 nationally.

How long does attic insulation take in Murray?

Blowing in insulation for a 1,000 sq ft attic can take a few hours; larger jobs take up to two days. Permit and inspection scheduling in Murray can add a few days.

Do I need a permit for attic insulation in Murray?

Insulation rarely needs a permit, but local codes set minimum R-values. Confirm with the Murray or county building department.

Attic Insulation near Murray

Millcreek, UT
2 mi away · pop. 62,139Taylorsville, UT
3 mi away · pop. 60,514West Jordan, UT
5 mi away · pop. 111,946Sandy, UT
5 mi away · pop. 87,461Holladay, UT
3 mi away · pop. 30,864South Salt Lake, UT
4 mi away · pop. 24,788Midvale, UT
4 mi away · pop. 32,613Canyon Rim, UT
4 mi away · pop. 10,062East Millcreek, UT
5 mi away · pop. 20,816

Other home services in Murray

HVACAC, furnace and heat pump repair, replacement and costs$6,500–$11,200RoofingRoof replacement, leak repair, hail damage and insurance$6,200–$23,300Kitchen RemodelingKitchen remodel costs, timelines, permits and ROI$9,300–$65,100Bathroom RemodelingBathroom remodel costs, timelines, showers and ROI$6,100–$16,700Water Damage RestorationLeaks, floods, burst pipes, drying and insurance$1,200–$5,000Fire Damage RestorationFire, smoke and soot cleanup, odor removal and insurance$2,700–$35,600Mold RemediationMold removal, testing, costs and insurance$1,400–$4,700Garage Door RepairSprings, cables, openers, off-track doors and costs$70–$630Foundation RepairCracks, settling, piers, slab repair and costs$2,000–$7,300Water Heater ReplacementTank, tankless and heat pump water heater costs, permits and haul-away$820–$1,700Sewer Line Repair & ReplacementSewer line repair, dig replacement and trenchless pipe bursting or lining costs$1,300–$5,000Slab Leak RepairFinding and fixing leaks under a concrete slab: detection, reroute and lining$590–$4,100Electrical Panel Upgrade100 to 200 amp upgrades, panel replacement, meter and subpanel costs$1,200–$2,800Window ReplacementNew window costs by type, frame material and installation method$280–$2,000Siding ReplacementSiding costs per square foot by material, plus removal, labor and permits$7,900–$18,600Gutter InstallationGutter costs per linear foot by material, plus downspouts, guards and removal$580–$1,600

Sources: HomeAdvisor — Attic insulation cost · Bob Vila — Attic insulation cost · ENERGY STAR — Recommended home insulation R-values. Ranges are rounded estimates; see our editorial policy.

Local risk factors reflect general Utah climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.