Key takeaways
- Typical cost in Murray: $580–$1,600 (per installation); national range $622–$1,677.
- Biggest local factors: snow & ice and hard freezes.
- How long it takes: A professional gutter installation typically takes 7–10 hours.
- Permits: Some areas require a permit for gutter installation; check locally.
- Best timing: Install before winter so gutters handle snowmelt and ice.
- Before you hire: get at least three written, itemized quotes from licensed, insured Utah contractors.
How much does gutter installation cost in Murray, UT?
Gutter installation typically costs $622–$1,677, with an average around $1,135. Material, linear footage and stories drive the price. Utah prices run 7% below the U.S. average, so a typical Murray job lands around $580–$1,600. Local labor rates, permit fees and your home's specifics move the final number.
| Material / item | Typical cost | Notes |
|---|---|---|
| Vinyl | $3–$6 per linear foot | |
| Aluminum | $4–$14 per linear foot | Dents easily |
| Galvanized steel | $6–$14 per linear foot | |
| Stainless steel | $9–$20 per linear foot | |
| Zinc | $10–$29 per linear foot | |
| Copper | $25–$40+ per linear foot | Up to 50 years |
| Seamless gutter system | $800–$5,000 total | Cut on site |
In a smaller community like Murray, some specialists travel in from nearby cities and may add a trip charge. Ask whether travel is included, and consider bundling projects.
How we calculate costs
National ranges come from published cost surveys (cited below). Local estimates apply an approximate state cost index. Read our methodology.
Gutter Installation cost questions for Murray, UT
- What is the cost of vinyl in Murray, UT? The typical cost of vinyl in Murray, UT is $0–$10 per linear foot, adjusted for Utah prices (national $3–$6 per linear foot).
- What is the cost of aluminum in Murray, UT? The typical cost of aluminum in Murray, UT is $0–$10 per linear foot, adjusted for Utah prices (national $4–$14 per linear foot). Dents easily.
- What is the cost of galvanized steel in Murray, UT? The typical cost of galvanized steel in Murray, UT is $10–$10 per linear foot, adjusted for Utah prices (national $6–$14 per linear foot).
- What is the cost of stainless steel in Murray, UT? The typical cost of stainless steel in Murray, UT is $10–$20 per linear foot, adjusted for Utah prices (national $9–$20 per linear foot).
- What is the cost of zinc in Murray, UT? The typical cost of zinc in Murray, UT is $10–$30 per linear foot, adjusted for Utah prices (national $10–$29 per linear foot).
- What is the cost of copper in Murray, UT? The typical cost of copper in Murray, UT is $20–$40+ per linear foot, adjusted for Utah prices (national $25–$40+ per linear foot). Up to 50 years.
- What is the cost of seamless gutter system in Murray, UT? The typical cost of seamless gutter system in Murray, UT is $740–$4,700 total, adjusted for Utah prices (national $800–$5,000 total). Cut on site.
- What is the cost of downspouts in Murray, UT? The typical cost of downspouts in Murray, UT is $0–$10 per foot, adjusted for Utah prices (national $5–$12 per foot). Vinyl $5–$8, aluminum $9–$12.
- What is the cost of gutter guards in Murray, UT? The typical cost of gutter guards in Murray, UT is $10–$10 per linear foot, adjusted for Utah prices (national $7–$12 per linear foot). Installed.
- What is the cost of old gutter removal in Murray, UT? The typical cost of old gutter removal in Murray, UT is $0.60–$0.79 per linear foot, adjusted for Utah prices (national $0.65–$0.85 per linear foot). Extra stories add $1–$3/ft labor.
What affects gutter installation in Murray
Murray has cold, snowy winters and warm summers. Install before winter so gutters handle snowmelt and ice.
Signs you need new gutters
- Holes, cracks or rust
- Sagging or pulling away from the house
- Water pooling at the foundation or a wet basement
- Peeling exterior paint
- Rotting window or door frames
- Eroded landscaping beneath the gutters
Common questions about gutter installation in Murray
How much does gutter installation cost in Murray, UT?
Most gutter installations cost about $580–$1,600 in Murray, UT, or roughly $1,200 for a one-story and $2,000 for a two-story home nationally.
How much do gutters cost per foot?
Vinyl runs about $3–$6, aluminum $4–$14, steel $6–$20 and copper $25–$40 or more per linear foot installed.
Are seamless gutters worth it?
Usually. They cost more but have fewer joints that can leak.
How much do gutter guards cost?
About $7–$12 per linear foot installed.
Timeline, permits and DIY in Murray
How long it takes
A professional gutter installation typically takes 7–10 hours.
Permits
Some areas require a permit for gutter installation; check locally. Check with the Murray building department for local rules.
DIY or hire a pro?
Gutter guards are DIY-friendly; full installation needs correct slope and ladder safety, so most hire a pro.
Questions to ask Murray contractors
Ask every bidder the same questions so you can compare quotes apples to apples.
- Are the gutters seamless, and what gauge is the metal?
- How many downspouts, and where will they discharge?
- Is removal of the old gutters included?
- What warranty covers leaks and sagging?
Maintenance that prevents costly repairs
- Clean gutters in spring and fall
- Check that downspouts drain away from the foundation
- Tighten loose hangers
How to hire for gutter installation in Murray
- Ask for seamless gutter quotes with downspout count and placement.
- Confirm hanger type and spacing.
- Ask whether old gutter removal and disposal is included.
- Get the workmanship warranty in writing.
Gutter Installation in Murray: FAQs
How much do new gutters cost in Murray, UT?
Nationally, most installations cost $622–$1,677, about $1,135 on average, depending on material and footage.
Do I need gutter guards in Murray?
Guards help most when trees overhang the roof; they cost about $7–$12 per linear foot installed.
What gutters work best in snowy areas?
Heavier-gauge metal gutters with strong hangers handle snow and ice best.
How much does gutter installation cost in Murray compared to the national average?
With Utah's regional cost index of 0.93, expect roughly $580–$1,600 in Murray, versus $622–$1,677 nationally.
How long does gutter installation take in Murray?
A professional gutter installation typically takes 7–10 hours. Permit and inspection scheduling in Murray can add a few days.
Do I need a permit for gutter installation in Murray?
Some areas require a permit for gutter installation; check locally. Confirm with the Murray or county building department.
Gutter Installation near Murray
2 mi away · pop. 62,139Taylorsville, UT
3 mi away · pop. 60,514West Jordan, UT
5 mi away · pop. 111,946Sandy, UT
5 mi away · pop. 87,461Holladay, UT
3 mi away · pop. 30,864South Salt Lake, UT
4 mi away · pop. 24,788Midvale, UT
4 mi away · pop. 32,613Canyon Rim, UT
4 mi away · pop. 10,062East Millcreek, UT
5 mi away · pop. 20,816
Other home services in Murray
Sources: Bob Vila — Gutter installation cost. Ranges are rounded estimates; see our editorial policy.
Local risk factors reflect general Utah climate patterns; check FEMA's National Risk Index for county-level ratings. Local estimates apply an approximate regional cost index to national ranges.